Water chillers NWT S
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C. For more information, send us an email to sales@normit.comÂ
Water chilling systems
Thanks to their attractive price and minimal installation requirements, our chillers are the optimal solution for small wineries and cideries that need only cooling for their production. The units are suitable for various cooling applications in drinks production. We offer three different sizes, with cooling capacities from 2,4 to 4,5 kW. Units with different voltages are also available on inquiry.
APPLICATIONSÂ OF A WATER CHILLER
- Cooling of must, wine, beer and other liquids during the fermentation process and for storage
- Pre-cooling of must or wine for pre-clearing
- Different cooling applications for production of fruit juice, cider, honey, marmelade, etc. ·Room temperating of halls and storage rooms - only possible with additional fan coils
WATER TEMPERATURE RANGE from +10°C to +25°C (from 50°F to 77°F)
AMBIENT TEMPERATURE RANGE from +10°C to +42°C (from 50°F to 107,6°F)
CHARACTERISTICS OF A WATER CHILLER
- Equipped with a hermetically closed motor compressor and a cooling water circuit containing a water tank and centrifugal pump
- Integrated by-pass for the pump
- Water tank drainage through a transparent pipe for water level display
- Easy filling of the water tank from outside the unit
- Coiled tube evaporator made of stainless steel
- Housing mainly made of ELO galvanised and coated steel
- Refrigerant R407C
- Chiller IP44 minimum
- Inlet/outlet connection both supplied in standard: ballvalve ¾“ male thread and 13mm tube-fitting for flexible tubes
TECHNICAL DETAILS OF A WATER CHILLERS
- Available in three models: Chilly 25 / Chilly 35 / Chilly 45
- Cooling capacity: 2,4 - 4,5 kW (3,22 - 6,03 HP)
- Refrigerant: R407C
- Electric connection: 230V/1Ph/50Hz (other options by inquiry)
- Water inlet / outlet: ball-valve ¾“ male thread and 13mm tube-fitting for flexible tube
You might also like
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities. Should you have any questions, email us at sales@foodtechprocess.com
16 other products in the same category:
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum temperature capability of 60 °C.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The vacuum crystallizer-cooler is specially designed for sweetened condensed milk. Crystallization with cooling is one of the most important stages in the production of condensed milk according to GOST and is necessary before dosing and packing the finished product.
- After crystallization, condensed milk has a delicate structure with small crystals
- Condensed milk has a homogeneous shape and attractive consumer properties
- The shelf life of condensed milk is extended without changing the quality of the product
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 300l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Fixed cooling unit wit different capacities from 67 kW up to 226 kW. Unit are solid and ensure long-life base operation.
For more information about the chiller, please contact our sales department at sales@foodtechprocess.com
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air coole/ heater contains. 4 caster wheels make it easy to move the unit.
For more information about the machine contact sales department sales@foodtechprocess.com
The vacuum bread cooler is well-suited for application in small bakeries or as a laboratory unit in industrial enterprises. This enables the post-baking of bread under vacuum conditions, influencing both its shape and structure.
- Built-in deep vacuum system
- Built-in vapor removal and condensation system
- Built-in refrigeration system
- The chamber is designed for 3 gastro containers size GN 1/1, or pallets: 400x600/530x325 mm
- Compact and mobile installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 130l
- Voltage: 380-400V
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
For more information, send us an email at sales@foodtechprocess.com
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities. Should you have any questions, email us at sales@foodtechprocess.com
The cooling tank is designed for storing milk and other beverages.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The Milk Cooler has a simple design, which allows for easy and safe operation. it meets the requirements of all dairy production facilities.
The vacuum diffusion cooling unit is a multifunctional device not only for vegan processors.
For more information, please contact our sales department at sales@foodtechprocess.com
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
For additional information, please contact us at sales@foodtechprocess.com
The NWT PLUS chillers have a compact design. They take little space and are very easy to install and to start. The units are mobile on wheels. We offer different capacities. For more information, email us at sales@foodtechprocess.com
An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.
For a price quote or a free consultation, send us an email to sales@foodtechprocess.com