Continuous fryer for chicken nuggets
The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.
For additional information, please contact us at sales@foodtechprocess.com
This is a fryer with electric heating - the heating elements are directly immersed in an insulated frying tank to achieve the most efficient heat transfer.
Thanks to this method, heat transfer (97 - 99%) is performed directly into the oil so as not to reduce the quality of the fried medium.
The system runs on three-phase power supply and is easily controlled from the central control panel.
The product passes between the lower conveyor and the adjustable hold down conveyor (supplied as standard), ensuring continuous immersion in cooking oil throughout the frying process.
Processing time and temperature are fully adjustable, allowing the manufacturer to set the appearance and level of preparation of each individual product. Together with the oil level detection and the automatic low-level shut-off system, and the hinged element enclosures, it offers a safe and easy-to-maintain solution to your frying requirements.
Accessories
1. Sediment removal system
An independent scraper system on the bottom of the fryer tank that removes submerged sediment and carbonized pieces from the oil.
2. Inline filtration system
the system follows the sediment removal system - it contains two stainless steel filter baskets. It removes fine particles from the oil while the fryer is running and ensures that the oil is kept clean.
3. Lifting system
For easy lifting of the conveyor from the fryer
4. Tank and pump
The reservoir is built directly under the fryer
5. Heating elements
The power of the heating elements is 2.4 to 2.8 watts per cm2. The oil is preheated less aggressively and thanks to this we prevent carbonization and significantly reduce oil degradation.
You might also like
The price is set for the basic version without additional modules
A versatile modular conveyor fryer with a single belt is used for continuous frying a variety of low water content products that do not require forced immersion beneath the surface of the oil.
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
Optional module for 400/1100/12 Universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
16 other products in the same category:
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
The special price offer is valid until the end of May 2024!
The combination of the compact 400/1100/12 model fryer along with the secondary upper pressure conveyor allows you to broaden the variety of fried products. It is suitable for ensuring uniform, high-quality frying of products in small-scale industries, professional kitchens and street food outlets by fully submerging the product in oil throughout the frying process. The fryer's compact dimensions make it easy to install on a tabletop work surface.
- The maximum height of the fried product is - up to 50 mm.
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email to sales@foodtechprocess.comÂ
USED PRODUCT - 1 LEFT IN STOCK
Continuous deep fryer OIL MINI is designed for gastronomy and catering. It is ideal for deep frying of meat, ravioli, meatballs, seafood, poultry and vegetables. It ensures continuous frying and stable frying results. The heating elements are located in a double thick aluminum bottom, the so-called "sandwich bottom", which prevents the product from sticking to the heating elements and burning, thus you can use the oil many times more!
Basic price - 5960€. The possibility of adding an oil spraying module (combifry), for an additional cost of 3980 € (RECOMMENDED OPTION)
For more information please email us at sales@foodtechprocess.com
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
Our continuous fryer is designed for frying cutlets, potatoes, meatballs, croquettes, fish, vegetables and many other products. Working volume up to l: 300 l.
For a price quote, send us an email to sales@foodtechprocess.com
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product†after frying
- Low carbonization of oil due to the cleaning feature after frying
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
The price is indicated with a semi-automatic control panel
The vacuum kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing, or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 10l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
A donut fryer is special designed for small confectionery shops, industries and catering establishments. It is capable of frying of various products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The automatic donut making machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Material: Stainless steel
- Principle of operation: Continuous mode
- Total power, kW: 3
- Voltage: 220-230V
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@foodtechprocess.com