Euro tub food trolley / Stainless steel meat trolley
It is possible to order tubs with four perforated walls and bottom, with or without outlet drain or with a tap. For more information, email us at sales@foodtechprocess.com Â
Euro tub food trolley
Thanks to its pouring bill and pushing handle, our Euro tubs are easy to use and its diamond pattern polyamide wheels allows you for easy manoeuvrability.
Standard meat trolley - Specifications
- Fully welded 304 grade stainless steel
- Brushed dull polish finish
- 150mm fixed polyamide wheels
- Available with pouring chute
EURO BINS / CONTAINERS
Our Euro bins or Euro tub are fully welded in 304 grade stainless steel. This is a must when it comes to food manufacturing in hygienic environments, as its 120, 200 and 300L capacity will make easier for you to handle your production. Moreover, our Euro tubs range will give you peace of mind, as the bottom of the bin is reinforced with 3mm of stainless steel.
 Edge with laid in bar, continuously welded and beaded. Electrolytically polished.
- It is possible to make a 120L Euro tub with a tap
- It is possible to make a 200 and 300 L Euro tub with a Ø 40 mm tap
Options:
- without an outlet drain
- with an outlet drain
MEASUREMENTSÂ
Stainless steel meat trolley 120 L
L x W x H
580 x 580 x595 mm
Weight 30 kg ± 0,2
Meat trolley 200 L
L x W x H
690 x 680 x 700 mm
Weight 40 kg ± 0,2
Standard food trolley 300 L
L x W x HÂ Â
690 x 680 x 950 mm
Weight 50 kg ± 0,2
You might also like
Heat boilers are designed to produce sausages, hams and offal. Technology for superior performance and hygiene.
For additional information, please contact us at sales@foodtechprocess.com
Paddle Mixer type is designed for fast and precise mixing for meat-mass production in meat processing factories. Can also be used for mixing products such as spices or tea.
Vacuum paddle mixers are designed for fast and precise mixing meat-mass in a vacuum. Used in meat production in meat processing factories.Â
16 other products in the same category:
The professional cooking vat is designed for dairy products processing. The machine can be used by farms and small dairy factories.
For more information, send us an email to sales@foodtechprocess.com
Atmospheric mixing tank with a duplicator for heating/cooling is designed for preparing, mixing and storing of liquid, gel products.Â
For more information, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 300l/ 430l/ 600l/ 1000l/ 1500l
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum kettle with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum kettle, and an installation for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
- Duplicator volume: 3l
The cylindrical conical tank is a vessel designed for the fermentation of the beer and other beverages.Â
The brewery boiler is a two-pot-shaped assembly, in which the integrated frame is a built-in lauter tun, a mash tank, a whirlpool, a laboratory sink and a control panel.Â
Tilting bratt pans with mixer are frying the product with continuous stirring. Designed for catering industry, school kitchens, restaurants and food industry. Variants of heating systems: direct electric and direct gas. Capacity: 150, 200 or 300l.
Price depends on the chosen option. Please email us at sales@foodtechprocess.com
Open fermentation vat / vessel is designed for fermentation of beer and other liquids.Â
This open tank is intended for washing the juice tanks. Kapacity 250L. For more information, send us a request.Â
- Material: Stainless steel
- Engine power, kW: 0,12
- Volume: 20l/ 50l/ 100l
- Voltage: 220-230V
The hot water tank is designed to catch the preheated water from the first stage of the wort cooling and then heat it to 80 ° C, the pump bowl is a part of the vessel.Â
The IBC containers are manufactured with a capacity of up to 3500 liters. The featured liquid storage unit is designed for storing oil and has a capacity of 1000 liters. For more information, send us a request.Â
This equipment is often used for temporary storage and transportation of liquid products, equipped with a specially shaped stirrer and heating / cooling "jacket".
For more information, contact our sales department at sales@foodtechprocess.com
The kettle is designed for cooking qualitative jam, marmalade, confiture from different fruits, vegetables and berries. It's an ideal and affordable solution for cooking various products.
For more information, send us an email at sales@foodtechprocess.com
The cooling tank is designed for storing milk and other beverages.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The tank is designed for heating and mixing chocolate, butter, margarine, honey and similar products.
For more information or a price quote, send us an email at: sales@foodtechprocess.com
The bin tipper MGBT is a device suitable for lifting and emptying crates used in agriculture.
For more information, send us an email at sales@foodtechprocess.com