![Vane Pump Vane Pump](https://foodtechprocess.com/3741-medium_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/1941-medium_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/4247-medium_default/vane-pump.jpg)
![Vane Pump Vane Pump](https://foodtechprocess.com/3741-small_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/1941-small_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/4247-small_default/vane-pump.jpg)
![Vane Pump Vane Pump](https://foodtechprocess.com/3741-medium_default/vane-pump.jpg)
![Vane Pump Vane Pump](https://foodtechprocess.com/3741-large_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/1941-large_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/4247-large_default/vane-pump.jpg)
Vane pump NC02
Vane pumps are used for pumping high viscosity products such as syrups, honey, mayonnaise, sauces, cream and many other products.
For more information about the product contact sales department at sales@foodtechprocess.com
These vane pumps are used for pumping high viscosity products.
Suitable products:![pump for mayonnaise](https://foodtechprocess.com/img/cms/products.JPG)
- syrups
- honey
- mayonnaise
- sauces
- cream
- other products with similar consistencyÂ
Universal use
A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a rotor that rotates inside a cavity. While vane pumps can handle moderate viscosity liquids, they excel at handling low viscosity liquids as well.
Energy saving
A variable-displacement vane pump is used as an energy-savings device and has been used in many applications.
Clever design
One of the major advantages of the vane pump is that the design readily lends itself to become a variable-displacement pump, rather than a fixed-displacement pump.
Advantages
- Handles thin liquids at relatively higher pressures
- Compensates for wear through vane extension
- Can run dry for short periods
- Develops good vacuum
Technical features:
- Motor 2,2 kW
- The maximum temperature 130 ËšC
- RPM - 900
- Material: Stainless steel
- Engine power, kW: 2,2
Designed for pumping hot thermal oil in frying circulation and filtration systems, for oil loading and unloading, in "hot" continuous oil filtration systems with a maximum temperature of up to 200 degrees.
More information: sales@foodtechprocess.com
We offer different types of pumps for different applications.
For more information, send us an email at sales@foodtechprocess.comÂ
This system is specifically designed for facilitating the direct transfer of pulp to a press.
- Capacity: 2000 kg/h
- Weight: 28
Electric continuous flow heaters in different designs and performance parameters.
For the price quote or for more information, send us an email at sales@foodtechprocess.com
Twin-screw extruder is designed for effective extruding, homogenization, pumping over of plastic masses (butter, margarine, honey, curd products, confectionery mixtures), and forming it into bars and rolls.
For a price quote, send us an email to sales@foodtechprocess.com
Stainless steel low-speed rotary pumps with a flexible impeller; We offer two versions. On base or trolley.
If you need more information, send us an email to sales@foodtechprocess.com
This pump is a monoblock single-stage liquid ring vacuum pump suitable for low, medium, and high vacuum applications. It is an economical pump with exceptional performance and reliability.
- Capacity: 52 m3/h
The pump provides a delicate straight-streaming pumping of a wide range of liquids with or without solid fragments with viscosity up to 150 Pa.s.Â
For a price quote, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
Progressive cavity pumps are used to transfer low and high viscosity products as well as products containing soft particles. They are available in three sizes.
For more information on the pumps or for a quote, contact our sales department at sales@foodtechprocess.com
Centrifugal pump designed for pumping low viscosity food and aggressive liquids. For more information, send us an email to sales@foodtechprocess.comÂ
We offer different types of pumps for different processes. For more information, send us an email to sales@foodtechprocess.comÂ
The high-performance screw pump is used for pumping both thick and viscous food products, as well as various masses containing pieces or solid inclusions such as in the cosmetics, cosmetology, and other industries.
- High performance
- All parts in contact with the product are made out of AISI304
- Does not damage products containing solid pieces
- Additional options: by-pass
- Material: Stainless steel
- Principle of operation: Continuous mode
The lobe rotary pumps are designed for pumping both liquid and thick products. We offer lobe pumps in 2 versions with 1.5 kW is a standard for milk, cream and similar products, and 3 kW is for dense low-flow products such as honey, pastes, cottage cheese etc.Â
For more information, contact our sales department at sales@foodtechprocess.com
Elliptical rotor pump (three power range models available).
For more information on the pumps or a quote for a specific model, please contact our sales department at sales@foodtechprocess.com
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.
For more information, send us an email to sales@foodtechprocess.comÂ
We offer a wide variety of different pumps for all kinds of liquids, semi-liquid products in various applications.
If you need any help, please email us at sales@foodtechprocess.comÂ
![Vane Pump Vane Pump](https://foodtechprocess.com/3741-large_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/1941-large_default/vane-pump.jpg)
![Vane pump NC02](https://foodtechprocess.com/4247-large_default/vane-pump.jpg)