![Liquid cooling unit TCAEY Liquid cooling unit TCAEY](https://foodtechprocess.com/3774-medium_default/chiller-tcaey.jpg)
![Liquid cooling unit TCAEY Liquid cooling unit TCAEY](https://foodtechprocess.com/3774-small_default/chiller-tcaey.jpg)
![Liquid cooling unit TCAEY Liquid cooling unit TCAEY](https://foodtechprocess.com/3774-medium_default/chiller-tcaey.jpg)
![Liquid cooling unit TCAEY Liquid cooling unit TCAEY](https://foodtechprocess.com/3774-large_default/chiller-tcaey.jpg)
Chiller TCAEY
The new line of TCAEY compact cooling units is suitable as a cooling source for industrial applications. It's a reliable chilling device for cooling different kinds of liquids.Â
For more information about this product, email us at sales@foodtechprocess.com
The compact design of the TCAEY series devices are equipped with reversible air-cooling heat pumps with axial fans, R410A refrigerant gas, and hermetic Scroll compressors.
TANK & PUMP
Pump unit complete with a circulator or electric circulation pump, membrane expansion tank, manual vent valve, safety valve, and pressure gauge.
Benefits:
- Installed with a pump
- Range with hermetic Scroll compressors and R410A refrigerant gas.
- Scroll-type rotary compressors with thermal protection and housing heating
- The water-side heat exchanger consists of adequately insulated stainless steel plates, complete with an antifreeze heater and water flow differential pressure switch.
- Air-side heat exchanger: featuring finned coil with copper pipes and aluminum fins with hydrophilic treatment and complete with protection grille.
- Fan: external rotor axial type electric fans equipped with internal thermal protection, accident protection grilles, and electronic device for continuous fan rotation speed regulation.
- Adaptive Function Plus logic used for Electronic control of the microprocessor
- The machine is completed with a condensate drain pan and unit-based anti-freeze heater.
Optionally supplied accessories:
- Regulated 3-way valve for the production of hot water,
- Optionally: regulated electrical resistance for the heat pump
- Outdoor air temperature probe for set-point compensation.
- Rubber anti-vibration mounts.
- Water filter.
- Control panel with display
- Unit for remote control and connection with other devices
Technical features:
- POWER SUPPLY: 400V/3PH+N/50HZ
- HOT WATER UP TO - 15 °C OUTDOOR AIR
- TYPE OF COIL: ALLUMINIUM COIL
- COIL PROTECTION: RPB-COIL PROTECTION GRILLES
- COMPRESSORS HEATER: RCC -CRANKCASE HEATER
- PACKAGING TYPE: PROTECTIVE PACKAGING
You might also like
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C.
For more information, send us an email to sales@normit.comÂ
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
If you have any questions, email us at sales@foodtechprocess.com
The NWT PLUS chillers have a compact design. They take little space and are very easy to install and to start. The units are mobile on wheels. We offer different capacities.
For more information, email us at sales@foodtechprocess.com
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
For additional information, please email us at sales@foodtechprocess.com
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
The AS series chillers belong to the top professional cooling devices for quick beverages' chilling in restaurants, cafes, catering industry facilities, and pubs. The chiller is suitable for cooling water, spark or soft drinks, beer, wine, strong alcohol drinks, and others.
For more information about this product, email us at sales@foodtechprocess.com
The vacuum diffusion cooling unit is a multifunctional device not only for vegan processors.
For more information, please contact our sales department at sales@foodtechprocess.com
The vacuum bread cooler is well-suited for application in small bakeries or as a laboratory unit in industrial enterprises. This enables the post-baking of bread under vacuum conditions, influencing both its shape and structure.
- Built-in deep vacuum system
- Built-in vapor removal and condensation system
- Built-in refrigeration system
- The chamber is designed for 3 gastro containers size GN 1/1, or pallets: 400x600/530x325 mm
- Compact and mobile installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 130l
- Voltage: 380-400V
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
For additional information, please email us at sales@foodtechprocess.com
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum temperature capability of 60 °C.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
Air cooling conveyor with MULTI AIR KNIFE is a system for intensive removing excess water or oil and preliminary cooling.Â
Lowering the temperature and humidity protects the product even without chemical treatment. The device is also used for continuous air cooling after heat treatment.
For more information about the cooler, contact our sales department at sales@foodtechprocess.com
The vacuum crystallizer-cooler is specifically designed for sweetened condensed milk. Crystallization with cooling is one of the most important stages in the production of condensed milk according to GOST and is necessary before dosing and packing the finished product.
- After crystallization, condensed milk has a delicate structure with small crystals
- Condensed milk has a homogeneous shape and attractive consumer properties
- The shelf life of condensed milk is extended without changing the quality of the product
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 300l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
If you have any questions, email us at sales@foodtechprocess.com
Milk cooler tank designed for cooling milk and other dairy products. The tank is available in 13 different capacities, covering a range from 50 liters all the way up to 2,500 liters, capable of meeting the needs of all dairy & cheese production facilities. We offer 2 or 4 milking options. Prices are displayed for the milk cooling tank with 4 milking.
- Material: Stainless steel
- Principle of operation: Batch mode
The cooling tank is designed for storing milk and other beverages.
For a price quote, send us an email at sales@foodtechprocess.comÂ
Cooling tunnel with a length of 15.2 meters. The standard design consists of 13 sections with removable top. For more information, send us a request.
The vacuum homogenizer is designed for whipping mayonnaise, ketchup, various sauces, confectionery pastes and fillings, condensed milk, jams and marmalades, canned goods, as well as similar liquid or pasty products with a homogeneous structure.
- Homogenizer in an external circulation loop
- Built-in vacuum generation and retention system
- Modular design with numerous options
- Possibility of automatic dosing of ingredients (optional)
- No additional pump required for loading/unloading
- Automatic top cover lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 650l
- Total power, kW: 13,5
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
For more information, send us an email at sales@foodtechprocess.com
An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.
For a price quote or a free consultation, send us an email to sales@foodtechprocess.com
![Liquid cooling unit TCAEY Liquid cooling unit TCAEY](https://foodtechprocess.com/3774-large_default/chiller-tcaey.jpg)