Barrel Hoop Mixer ConMix
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
The ConMix barrel mixer is a batch-type device for mixing bulk products using the gravitational circulation method, similar to a «drunk barrel».
Suitable for application in the food, cosmetics, pharmaceutical, chemical and other industries. Designed for mixing a wide range of bulk products in transport containers (for the ConMix20 and ConMix75 models), the equipment corresponds to the highest level of hygiene, since there is no leakage of material from the transport container during product processing. Another big advantage of this type of mixing is that it reduces the time required to mix each batch of product, since there is no need to load and unload the product into the container, just replace it with a new one.
Advantages
- The device ensures a high degree of homogeneity of the final mixture due to the intensive multidirectional movement of the container. The absence of moving parts allows you to efficiently mix bulk or fragile products without the risk of damage. Mixing occurs with the help of gravity.
- Maximum efficiency: the mixer is always only used for mixing, the loading and unloading process occurs separately.
- The ConMix series mixers can also be used to dissolve solid ingredients in liquid product mixtures.
- Versatile use - quickly move on to mixing another product without having to clean the mixing chamber.
- Designed to meet the highest hygienic standards, without the risk of contamination or the need to load and unload the product.
- High performance.
Basic version
The mixer - a “drunk barrel†type mixer consists of a supporting structure with a drive (geared motor), a protective safety bar and a control panel.
Principle of operation
Before starting (turning the equipment on), the containers must be closed and secured, and the safety bar must be lowered. If the safety arc is raised while the equipment is operating, the unit will turn off automatically. In the barrel fixed in a frame holder inclined relative to the horizontal axis, the product particles tumble under the influence of friction and gravity, colliding with each other. Mixing occurs as a result of slight differences in particle speeds. The products are mixed thoroughly and without taking damage. The mixing time depends on the product as well as the production technology.
The model line
Model          | Volumes, l       | Drive power, kW      | Dimensions, mm         |
СonMix20 | 20-30 | 0,37 | 1020/805/826 |
ConMix75 | 48-65 | 0,55 | 1313/1012/1250 |
ConMixStatic 100 | 100 | 1,1 | 1404/1324/1313 |
Options
- For the ConMixStatic version, additional systems can be installed - high-speed accelerators that provide controlled granulation and dosing of liquid components in specified quantities.
- ConMix mixers can be customized for any type of container at the customer's request. If needed, the mixer can be made with a fixed (static) container.
Watch a video on our YouTube channel showcasing how our ConMix works.
- Engine power, kW: 0,37/ 0,55/ 1,1
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
For more information, send us an email at sales@foodtechprocess.com
The price is indicated without the frequency converter
A twin-screw mixer for fast and intensive mixing, stirring of bulk solid products, such as granules, muesli with various powder additives.
- The mixing blades carefully move while thoroughly mixing the product
- The mixing mode allows you to move the product cyclically in a circle
- High mixing efficiency due to the counter-movement of the 2 shafts
- Compact design
- Possibility to install scrapers on each blade (optional)
- Reinforced drive, can be used for products saturated with moisture as well
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Volume: 500l
- Total power, kW: 3
Suitable for mixing a small amount of dough or meat as well as other thick media.
The CH PROFI 400 Vacuum Cooking Equipment is a high-performance system tailored for professional kitchens and industrial facilities, streamlining production processes with its advanced vacuum and mixing technology, ensuring superior flavor and texture in food preparation.
We offer different capacity vacuum cookers. For more details and price, please email us at sales@foodtechprocess.com
The mixers are made up of a double-walled cylindrical stainless steel vessel with cavity, with drain hole and 50 cm diameter butterfly valve. The cavity is filled with water which is heated by an electric resistance thermostat. The honey is mixed by blades with a marine propeller profile, adjustable in height along an oblique shaft.Â
For a price quote, send us an email to sales@foodtechprocess.comÂ
Lid with an automatic stirrer for stainless steel 40 cm pots, suitable for volumes of 50 and 100 liters. An automatic stirrer allows you to mix and stirr various products, including during thermal processing. The type of mixing device can be additionally selected depending on the required process.
- Professional industrial single-phase motor for 220-230 Volts
- The control is located directly on the motor housing or on the drive cable
- Easy and simple installation and fixation of the lid on the pan
- Suitable for standard 40 cm pots with a capacity of 50 or 100 liters
- The lid and stirrer are made entirely out of stainless steel
- Material: Stainless steel
- Engine power, kW: 0,18/ 0,25
- Principle of operation: Batch mode
- Voltage: 220-230V
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum kettle with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum kettle, and an installation for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
- Duplicator volume: 3l
Multifunctional vacuum mixer/homogenizer for grinding, mixing, and homogenizing products to obtain homogeneous masses.
- Built-in jacket for the bottom and walls of the unit.
- Cutter knives with a powerful electric drive
- Slanted design for efficient mixing and chopping
- Forced circulation circuit (optional)
- Wide range of options
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 350l/ 650l
- Total power, kW: 13/ 17
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Butter churner with a volume of 50 L and a usable volume of 25 L for the traditional production of butter from cream.
For more information, contact our sales department at sales@foodtechprocess.com
Vacuum mixer processing plant for viscous products is an ideal solution for the production of pilot batches and the industrial manufacturing of a wide range of products from small to medium capacity.
The Economy series of the cooking kettles comprise a thick-walled stainless steel container with an electric mixer mounted on the quick-release upper housing. The installation allows you to mix and stir products during processing. The thick bottom of the pot allows it to be installed on all types of heating surfaces (gas, induction or electric stove).
The Economy version is recommended for use with mostly liquid products; If processing thick and viscous products is necessary, we offer the Premium version of the cooking kettle.
- Sandwich bottom (multilayer) for use on all types of hobs, including induction
- Quick release lid with an electric stirrer
- Safety grid under the upper hull hatch - safe handling when stirring
- Possibility of visual inspection through the safety grid during processing
- Safe loading of components even during mixing
- Material: Stainless steel
- Engine power, kW: 0,12
- Volume: 20l/ 50l/ 100l
- Voltage: 220-230V
A rotating drum unit designed for continuous coating and seasoning operations as well as product saturation with spices and flavor additives, utilized in production lines for chips, snacks, and various semi-finished products.
- Adjustment of the Drum Tilt Angle
- Hygienic design and execution: mirror-polished inner surface of the drum
- Various blade options for gently turning the product (optional)
- Dispensers for dry and wet flavorings (optional)
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 0,25
- Voltage: 380-400V
SIPM 10 liter pasta mixer is designed for medium size commercial operations, ideal for medium-size restaurants to produce any kind of pasta such as spaghetti, taglia pasta, cannelloni, macaroni, conchiglie, rigatoni, penne and many others. The price includes a pasta cutter.
For more information, send us an email at sales@foodtechprocess.com
Used in chemical, construction, cosmetic or food industries.
For a price quote, send us an email to sales@foodtechprocess.com
The price is indicated for the basic version of the set of equipment with a homogenizer
The equipment for the production of ice cream mixtures is based on a universal vacuum reactor with a coolant jacket and a multi-stage dispersant/homogenizer in an external circulation loop.
- Special type of a stirring device for easy disassembly and cleaning
- Processing with minimal product loss
- The bottom outlet valve is included in the basic version of the installation
- Multi-stage disperser for intensive wetting and homogenization of the flowing mixture
- External circulation circuit with a three-way valve for operation/washing of the equipment
- Reinforced agitator drive for thick and viscous mixtures
- Built-in vacuum pump
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Total power, kW: 3
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
![Barrel Mixer Barrel Mixer](https://foodtechprocess.com/2859-large_default/barrel-hoop-mixer-conmix.jpg)
![The hoop mixer The hoop mixer](https://foodtechprocess.com/2858-large_default/barrel-hoop-mixer-conmix.jpg)
![The barrel mixer The barrel mixer](https://foodtechprocess.com/2313-large_default/barrel-hoop-mixer-conmix.jpg)