Continuous fryer for chicken nuggets
The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.
For additional information, please contact us at sales@foodtechprocess.com
This is a fryer with electric heating - the heating elements are directly immersed in an insulated frying tank to achieve the most efficient heat transfer.
Thanks to this method, heat transfer (97 - 99%) is performed directly into the oil so as not to reduce the quality of the fried medium.
The system runs on three-phase power supply and is easily controlled from the central control panel.
The product passes between the lower conveyor and the adjustable hold down conveyor (supplied as standard), ensuring continuous immersion in cooking oil throughout the frying process.
Processing time and temperature are fully adjustable, allowing the manufacturer to set the appearance and level of preparation of each individual product. Together with the oil level detection and the automatic low-level shut-off system, and the hinged element enclosures, it offers a safe and easy-to-maintain solution to your frying requirements.
Accessories
1. Sediment removal system
An independent scraper system on the bottom of the fryer tank that removes submerged sediment and carbonized pieces from the oil.
2. Inline filtration system
the system follows the sediment removal system - it contains two stainless steel filter baskets. It removes fine particles from the oil while the fryer is running and ensures that the oil is kept clean.
3. Lifting system
For easy lifting of the conveyor from the fryer
4. Tank and pump
The reservoir is built directly under the fryer
5. Heating elements
The power of the heating elements is 2.4 to 2.8 watts per cm2. The oil is preheated less aggressively and thanks to this we prevent carbonization and significantly reduce oil degradation.
You might also like
The price is set for the basic version without additional modules
The versatile modular conveyor fryer with a single belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
The AISI 304 stainless steel oil drain system is suitable for use with most deep fryers. It allows you to filter the oil directly when draining it from the fryer.
- Material: Stainless steel
- Weight: 13,5
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
The automatic donut forming and frying machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Material: Stainless steel
- Principle of operation: Continuous mode
- Total power, kW: 3
- Voltage: 220-230V
A donut fryer is special designed for small confectionery shops, industries and catering establishments. It is capable of frying of various products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
We offer different types of continuous fryers, let us know which product you wish to fry and we will help you choose the right fryer for your business.
For more information, contact us at sales@foodtechprocess.comÂ
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
The special price offer is valid until the end of August 2024!Â
The combination of the compact 400/1100/12 model fryer with the secondary upper pressure conveyor allows you to expand the variety of fried products. It is suitable for ensuring uniform, high-quality frying of products in small-scale production, professional kitchens and street food businesses by fully submerging the product in oil throughout the frying process.
You can send us a request at sales@foodtechprocess.com
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
Price depends on the chosen option. Please email sales@foodtechprocess.com
The price is set based on the basic built-in heating option of 24 kW.
The vacuum fryer is designed for frying foods in oil at low temperatures, allowing for the production of healthy snacks such as vegetable and fruit chips. The vacuum feature enables you to reduce the frying temperature of oil down to 110-120 degrees!
- «Cold roast» is a tasty and healthy method of processing the product
- Drying and frying without caramelizing the sugars contained in the product
- Large frying tank - for processing foods with a higher water content
- Modular heating system which allows you to increase the heating power up to 108 kW (optional)
- Circulating heating of oil through a heat exchanger minimizes oil spoilage and prevents localized overheating
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l
- Oil volume: 200l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 10l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
We can help you choose the right continuous fryer suited for your needs. For a free consultation or a quote, please send us an email at sales@foodtechprocess.com
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.Â
For more information please email sales@foodtechprocess.com
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
![Continuous chicken nuggets fryer Continuous chicken nuggets fryer](https://foodtechprocess.com/3611-large_default/continuous-fryer-for-chicken-nuggets.jpg)
![Continuous fryer for chicken nuggets](https://foodtechprocess.com/2158-large_default/continuous-fryer-for-chicken-nuggets.jpg)
![Continuous fryer for chicken nuggets](https://foodtechprocess.com/2159-large_default/continuous-fryer-for-chicken-nuggets.jpg)
![Continuous fryer for chicken nuggets](https://foodtechprocess.com/2160-large_default/continuous-fryer-for-chicken-nuggets.jpg)