Paddle conveyor module for the universal fryer 400/1100/12
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
The purpose of the paddle fryer module
The paddle conveyor is designed for uniform frying of thin and light products (eg potato chips or extruded products). The module is installed on the basic model of the tabletop universal fryer and allows you to expand the range of products. With this module, you can easily fry the following products:
- Chips
- Corn/rice snacks
- French fries
- Rustic potatoes (potato wings)
- Cassava chips - Wikiwand Cassava (Yuka) chips
- Croutons (croutons)
- Croquettes
- Pellets / extruded snacks
Basic version
It is a stainless steel conveyor with 4 sections of paddles, evenly spaced along the entire length of the roasting zone. Due to the high sidewalls, the product floats freely in the frying zone, periodically plunging under the oil level. The movement and drive of the paddles is synchronized between the module and the base conveyor.
Operating principle
A divider is installed at the product inlet in this module, which does not allow the product to stick together, and evenly divides and distributes the product across the entire width of the conveyor, and the blades, turning over, move the product along the entire working zone. Thanks to this constant and uniform mixing, the product is evenly fried. The special curved shape of the paddles reduces the risk of damage to fragile products during frying.
Advantages
- Frying time is adjustable and can be set from a few seconds up to 50 minutes
- Special shape of paddles that does not damage even the most fragile product
- Special divider at the product inlet for even distribution of the product across the entire width of the working area
- Low product loss - the bottom conveyor does not allow the product to go beyond the sidewalls or fall below the level of the base conveyor
- Simple and easy installation and dismantling
Additional available modules for the tabletop universal fryer 400/1100/12:
- Second/upper pressure conveyor for forced immersion of the product in oil during frying
- Working table for deep fryer made of stainless food steel
- 75 liter oil reservoir* Reservoir can only be ordered with the worktable as part of it
- Automatic hot oil circulation** with filtration suitable for product pre-treatment at the fryer inlet – hot oil waterfall to fry product, close product pores and reduce product sticking
* Volume of oil +- 5 liters.
**For version with work table and oil reservoir
This is a module for the Compact Modular Electric Conveyor fryer 400/1100/12
You might also like
The price is set for the basic version without additional modules
The versatile modular conveyor fryer with a single belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
The automatic donut forming and frying machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Material: Stainless steel
- Principle of operation: Continuous mode
- Total power, kW: 3
- Voltage: 220-230V
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
For additional information, please contact us at sales@foodtechprocess.com
A donut fryer is special designed for small confectionery shops, industries and catering establishments. It is capable of frying of various products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
Production line for vegetarian vegetable-based formed or molded products such as falafel. The line is based on the classical method of producing semi-finished products for their subsequent freezing and packaging.
- Compact line suitable for both professional kitchens and industrial production.
- Fully automatic operation with minimal manual labor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Voltage: 380-400V
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.
For more information please email sales@foodtechprocess.com
Multifunctional pans function as a frying, cooking, and mixing device in one installation.
For more information on our automatic Wok-style frying pan with a built in mixer, please contact our sales department at sales@foodtechprocess.com
The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.
For additional information, please contact us at sales@foodtechprocess.com
The price is set for the basic version without additional modules
The versatile modular conveyor fryer with a single belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 10l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product” after frying
- Low carbonization of oil due to the cleaning feature after frying
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
![Additional paddle conveyor module for the 400/1100/12 fryer Additional paddle conveyor module for the 400/1100/12 fryer](https://foodtechprocess.com/2680-large_default/paddle-conveyor-module-for-the-universal-fryer-400110012.jpg)
![Paddle conveyor module for the universal fryer 400/1100/12](https://foodtechprocess.com/2708-large_default/paddle-conveyor-module-for-the-universal-fryer-400110012.jpg)
![Paddle conveyor module for the universal fryer 400/1100/12](https://foodtechprocess.com/2676-large_default/paddle-conveyor-module-for-the-universal-fryer-400110012.jpg)
![Paddle conveyor module for the universal fryer 400/1100/12](https://foodtechprocess.com/2677-large_default/paddle-conveyor-module-for-the-universal-fryer-400110012.jpg)
![Paddle conveyor module for the universal fryer 400/1100/12](https://foodtechprocess.com/2678-large_default/paddle-conveyor-module-for-the-universal-fryer-400110012.jpg)
![Paddle conveyor module for the universal fryer 400/1100/12](https://foodtechprocess.com/2679-large_default/paddle-conveyor-module-for-the-universal-fryer-400110012.jpg)