Mixing unit with heating and cooling
Atmospheric mixing tank with a duplicator for heating/cooling is designed for preparing, mixing and storing of liquid, gel products.Â
For more information, send us an email to sales@foodtechprocess.com
Atmospheric tanks with stirrers are designed for preparing liquid and gel products using a mixing system, not requiring e vacuum to de-air the mass.
At the customer's request it can be completed with a dispersing straight-through type for product circulation and simultaneous dispersion.
Advantages:Â
- Frame mixer with scrapers 60 - 100 rpm
- Heating-cooling jacket with ports for connecting to the coolant (steam / water)
- Product and heat carrier temperature sensors
- Washing heads
- Internal surface polishing to Ra <0.4 μm
- Adjustable feet
- Control system
Construction features:
- As a standard these tanks are equipped with a frame mixer. Optional the frame mixing device can be replaced with a high-speed stirrer of other types, such as: blade, turbine or screw (depending on the volume, similar mixing devices can be multi-tiered).
- There are two variants of vessel’s lid: conical or flat. You can choose the lid according to your wishes and requirements to the structure.Â
- The bottom of the tank can be of three types: flat inclined, conical or torispherical. The bottom shape primarily depends on the purpose of the tank and product properties.
- In the basic version, the inner surface of atmospheric mixers polished, welded seams cleaned and brushed. Optionally, the inner surface of the mixer can be polished to Ra <0.4 μm if there are strict requirements that happens primarily in cosmetic industry.
All the vessels of this type are equipped with a heating / cooling jacket.
Water, oil or steam can be used as a heat carrier. The mixer is equipped with two temperature sensors: in the flask to control the temperature of the product and in the jacket to control the temperature of the heat carrier. An electronically controlled valve is installed at the entrance to the jacket and, according to the readings of both sensors, is serves to supply the coolant to the jacket.
At the request of the customer, electric heaters can also be installed in the jacket. In this case, the heating system is completely closed and all that is needed is periodic replenishment of the jacket with coolant. For this, a coolant level sensor is installed in the system. To prevent heat loss, the flask and the bottom of the vessel have an insulating layer of at least 50 mm. On top of the insulating layer there is a sheathing with a thickness of 1 ... 1.5 mm.
The tank can be installed on adjustable tubular supports for floor installation or feet for installation on a service platform.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 300l/ 430l/ 600l/ 1000l/ 1500l
You might also like
These storage tanks are intended for fruit and vegetable juice storage and treatment. Price depends on your production process and the product. For more information, send us a request.Â
The periodic drum coating/seasoning machine is designed to saturate and infuse a diverse range of products with flavorful aromas, vitamins, and various taste additives. It is utilized in the production of snacks, chips, cereals, and nuts, offering a wide array of flavor enhancements.
- Mechanical system for tilting the working bowl with fixation points in intermediate positions
- Special perforated blades for gentle product turning
- Powerful drum rotation drive
- Entirely made out of food grade stainless steel AISI304
- Easy control via an inverter (optional): speed control and reverse
- Stainless steel
- Batch mode
- Slovakia
- 100l
- 0,55
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum temperature capability of 60 °C.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The industrial mixing and homogenizing equipment is well-suited for small and medium-sized production enterprises engaged in the processing of food, cosmetics, and various chemicals.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The tank is designed for heating and mixing chocolate, butter, margarine, honey and similar products.
For more information or a price quote, send us an email at: sales@foodtechprocess.com
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum kettle with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum kettle, and an installation for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Stainless steel
- 0,25
- Batch mode
- Slovakia
- 100l
- 380-400V
- -0,8 Bar
- 3l
The cost is indicated without the control panel, which can be selected and offered separately
A versatile cooking system, featuring an inclined reactor and a frame mixing device, is designed for processing a diverse range of products through methods such as cooking, boiling, and concentrating at atmospheric pressure. This system is commonly used for the production of syrups, jams, confiture, and honey processing.
- Slanted design with gravity mixing - 25% more efficient!
- External decorative casing made out of polished stainless steel with insulation
- Jacket for the bottom and the walls of the working container along the entire height
- Lid opening sensor for safe operation
- Scrapers are already included in the basic version of the installation
- Stainless steel
- Batch mode
- Slovakia
- 100l/ 300l/ 430l/ 600l/ 1000l
- 220-230V 380-400V
This open tank is intended for washing the juice tanks. Kapacity 250L. For more information, send us a request.Â
A vacuum deaerator is extensively used in the food industry to remove gases from products that may retain some bubbles post-processing. Additionally, a flow deaerator is utilized to minimize foaming in products, ensuring a denser structure, especially prior to packaging. Vacuum deaerators play a crucial role in eliminating specific odors from the products, such as in the production of juices, purees, and herbal drinks. This process significantly contributes to enhancing the overall quality and taste of the final product.
- Enhances product quality, structure, and shape
- Prevents oxidation by removing gases
- Preserves organoleptic properties and extends the shelf life
- Suitable for thick and viscous products
- The flow principle allows for the installation of this equipment in existing production lines
- Stainless steel
- Continuous mode
- Slovakia
- 380-400V
- -0,8 Bar
The cylindrical conical tank is a vessel designed for the fermentation of the beer and other beverages.Â
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
For more information, send us an email at sales@foodtechprocess.com
The cooling tank is designed for storing milk and other beverages.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The hot water tank is designed to catch the preheated water from the first stage of the wort cooling and then heat it to 80 ° C, the pump bowl is a part of the vessel.Â
The bin tipper MGBT is a device suitable for lifting and emptying crates used in agriculture.
For more information, send us an email at sales@foodtechprocess.com
The tank is designed for heating and mixing chocolate, butter, margarine, honey and similar products.
For more information or a price quote, send us an email at: sales@foodtechprocess.com
The Economy series of the cooking kettles comprise a thick-walled stainless steel container with an electric mixer mounted on the quick-release upper housing. The installation allows you to mix and stir products during processing. The thick bottom of the pot allows it to be installed on all types of heating surfaces (gas, induction or electric stove).
The Economy version is recommended for use with mostly liquid products; If processing thick and viscous products is necessary, we offer the Premium version of the cooking kettle.
- Sandwich bottom (multilayer) for use on all types of hobs, including induction
- Quick release lid with an electric stirrer
- Safety grid under the upper hull hatch - safe handling when stirring
- Possibility of visual inspection through the safety grid during processing
- Safe loading of components even during mixing
- Stainless steel
- 0,12
- 20l/ 50l/ 100l/ 150l
- 220-230V
It is possible to order tubs with four perforated walls and bottom, with or without outlet drain or with a tap.
For more information, email us at sales@foodtechprocess.com Â
Open fermentation vat / vessel is designed for fermentation of beer and other liquids.Â
The kettle is designed for cooking qualitative jam, marmalade, confiture from different fruits, vegetables and berries. It's an ideal and affordable solution for cooking various products.
For more information, send us an email at sales@foodtechprocess.com
The professional cooking vat is designed for dairy products processing. The machine can be used by farms and small dairy factories.
For more information, send us an email to sales@foodtechprocess.com
This equipment is often used for temporary storage and transportation of liquid products, equipped with a specially shaped stirrer and heating / cooling "jacket".
For more information, contact our sales department at sales@foodtechprocess.com