Water chillers NWT S
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C.
For more information, send us an email to sales@normit.comÂ
Water chilling systems
Thanks to their attractive price and minimal installation requirements, our chillers are the optimal solution for small wineries and cideries that need only cooling for their production. The units are suitable for various cooling applications in drinks production. We offer three different sizes, with cooling capacities from 2,4 to 4,5 kW. Units with different voltages are also available on inquiry.
APPLICATIONSÂ OF A WATER CHILLER
- Cooling of must, wine, beer and other liquids during the fermentation process and for storage
- Pre-cooling of must or wine for pre-clearing
- Different cooling applications for production of fruit juice, cider, honey, marmelade, etc. ·Room temperating of halls and storage rooms - only possible with additional fan coils
WATER TEMPERATURE RANGE from +10°C to +25°C (from 50°F to 77°F)
AMBIENT TEMPERATURE RANGE from +10°C to +42°C (from 50°F to 107,6°F)
CHARACTERISTICS OF A WATER CHILLER
- Equipped with a hermetically closed motor compressor and a cooling water circuit containing a water tank and centrifugal pump
- Integrated by-pass for the pump
- Water tank drainage through a transparent pipe for water level display
- Easy filling of the water tank from outside the unit
- Coiled tube evaporator made of stainless steel
- Housing mainly made of ELO galvanised and coated steel
- Refrigerant R407C
- Chiller IP44 minimum
- Inlet/outlet connection both supplied in standard: ballvalve ¾“ male thread and 13mm tube-fitting for flexible tubes
TECHNICAL DETAILS OF A WATER CHILLERS
- Available in three models: Chilly 25 / Chilly 35 / Chilly 45
- Cooling capacity: 2,4 - 4,5 kW (3,22 - 6,03 HP)
- Refrigerant: R407C
- Electric connection: 230V/1Ph/50Hz (other options by inquiry)
- Water inlet / outlet: ball-valve ¾“ male thread and 13mm tube-fitting for flexible tube
You might also like
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
If you have any questions, email us at sales@foodtechprocess.com
The Milk Cooler has a simple design, which allows for easy and safe operation. it meets the requirements of all dairy production facilities.
Cooling tunnel with a length of 15.2 meters. The standard design consists of 13 sections with removable top. For more information, send us a request.
Fixed cooling unit wit different capacities from 67 kW up to 226 kW. Unit are solid and ensure long-life base operation.
For more information about the chiller, please contact our sales department at sales@foodtechprocess.com
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
For additional information, please contact us at sales@foodtechprocess.com
The vacuum diffusion cooling unit is a multifunctional device not only for vegan processors.
For more information, please contact our sales department at sales@foodtechprocess.com
The NWT PLUS chillers have a compact design. They take little space and are very easy to install and to start. The units are mobile on wheels. We offer different capacities.
For more information, email us at sales@foodtechprocess.com
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
For additional information, please contact us at sales@foodtechprocess.com
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.
For more information about the machine contact sales department sales@foodtechprocess.com
Milk cooler tank designed for cooling milk and other dairy products. The tank is available in 13 different capacities, covering a range from 50 liters all the way up to 2,500 liters, capable of meeting the needs of all dairy & cheese production facilities. We offer 2 or 4 milking options. Prices are displayed for the milk cooling tank with 4 milking.
- Stainless steel
- Batch mode
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
For additional information, please email us at sales@foodtechprocess.com
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
For more information, send us an email at sales@foodtechprocess.com
The vacuum homogenizer is designed for whipping mayonnaise, ketchup, various sauces, confectionery pastes and fillings, condensed milk, jams and marmalades, canned goods, as well as similar liquid or pasty products with a homogeneous structure.
- Homogenizer in an external circulation loop
- Built-in vacuum generation and retention system
- Modular design with numerous options
- Possibility of automatic dosing of ingredients (optional)
- No additional pump required for loading/unloading
- Automatic top cover lifting system
- Stainless steel
- Batch mode
- Slovakia
- 650l
- 13,5
- 380-400V
- -0,8 Bar
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
For a price quote or more information, send us a request at sales@foodtechprocess.com
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum temperature capability of 60 °C.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The vacuum bread cooler is well-suited for application in small bakeries or as a laboratory unit in industrial enterprises. This enables the post-baking of bread under vacuum conditions, influencing both its shape and structure.
- Built-in deep vacuum system
- Built-in vapor removal and condensation system
- Built-in refrigeration system
- The chamber is designed for 3 gastro containers size GN 1/1, or pallets: 400x600/530x325 mm
- Compact and mobile installation
- Stainless steel
- Batch mode
- Slovakia
- 130l
- 380-400V