Small conveyor fryer for chips and snacks
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
This combination of the basic universal fryer with the paddle conveyor module is designed to evenly fry thin and light foods (such as potato chips or extruded snacks). The conveyor with blades can be installed on the basic model of the tabletop universal fryer allowing you to expand the range of products.
With this module you can easily fry the following products:
|
|
|
|
|
|
|
|
|
|
|
|
Advantages
- Frying time is adjustable and can be set from a few seconds to 50 minutes
- Special paddle shape that does not damage even the most fragile products
- Special separator at the product inlet for uniform distribution of the product across the entire width of the working area
- Low product losses - the bottom conveyor does not allow the product to go beyond the sidewalls or fall below the level of the base conveyor
- Simple and easy installation and removal
- Safety thermostats on each heating element
Module with paddles
The module included in this combination comprises a stainless steel conveyor with 4 sections of blades spaced evenly along the entire length of the frying area. Due to the high sides, the product floats freely in the frying zone; the blades immerse the product in oil, turn it over and move it towards the remote conveyor (the unloading part of the lower base belt). The movement and drive of the paddles is synchronized between the module and the base conveyor.
Operating principle
At the product inlet of this module, a separator is installed, which does not allow the product to stick together, while evenly dividing and distributing the product across the entire width of the conveyor, while the blades, turning over, advance the product along the entire working length. Thanks to this constant and uniform stirring, the product is evenly fried. The special curved shape of the blades reduces the likelihood of damage to fragile products during the frying process.
Other additional modules for the fryer:
- Second upper pressure conveyor for forced immersion of the product in oil to achieve deep frying
- Work table for the fryer out of food grade stainless steel
- Oil reservoir with a capacity of 75 liters* The reservoir can only be ordered together with the worktable, as a part of it
- Automatic hot oil circulation system** with filtration, suitable for pre-treatment of products at the inlet of the fryer - a “waterfall†of hot oil to pre-fry the product, close the pores of the product and reduce its sticking
*Oil volume 75 liters +- 5 liters.
**For the version with a work table and an oil reservoir
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
You might also like
The price is set for the basic version without additional modules
The versatile modular conveyor fryer with a single belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Electricity
- Stainless steel
- 12
- Continuous mode
- Slovakia
- 1100 mm
- 400 mm
- 60l
- 380-400V
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
- Stainless steel
- Continuous mode
- 400 mm
Automatic donut fryers are extremely efficient machines designed for easier production of doughnuts.Â
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
Multifunctional pans function as a frying, cooking, and mixing device in one installation.
For more information on our automatic Wok-style frying pan with a built in mixer, please contact our sales department at sales@foodtechprocess.com
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Electricity
- Stainless steel
- 5
- 10l
- 8l
- 380-400V
- -0,8 Bar
The automatic donut forming and frying machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Stainless steel
- Continuous mode
- 3
- 220-230V
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.Â
For more information please email sales@foodtechprocess.com
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email at sales@foodtechprocess.comÂ
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@foodtechprocess.com
Our continuous fryer is designed for frying cutlets, potatoes, meatballs, croquettes, fish, vegetables and many other products. Working volume up to l: 300 l.
For a price quote, send us an email to sales@foodtechprocess.com
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
We can help you choose the right continuous fryer suited for your needs. For a free consultation or a quote, please send us an email at sales@foodtechprocess.com
A donut fryer is special designed for small confectionery shops, industries and catering establishments. It is capable of frying of various products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.
For additional information, please contact us at sales@foodtechprocess.com
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Electricity
- Stainless steel
- 12
- Continuous mode
- Slovakia
- 1100 mm
- 400 mm
- 380-400V