Compact paddle fryer for chips and snacks
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
This combination of the basic universal fryer with the paddle conveyor module is designed to evenly fry thin and light foods (such as potato chips or extruded snacks). The conveyor with blades can be installed on the basic model of the tabletop universal fryer allowing you to expand the range of products.
With this module you can easily fry the following products:
|
|
|
|
|
|
|
|
|
|
|
|
Advantages
- Frying time is adjustable and can be set from a few seconds to 50 minutes
- Special paddle shape that does not damage even the most fragile products
- Special separator at the product inlet for uniform distribution of the product across the entire width of the working area
- Low product losses - the bottom conveyor does not allow the product to go beyond the sidewalls or fall below the level of the base conveyor
- Simple and easy installation and removal
- Safety thermostats on each heating element
Module with paddles
The module included in this combination comprises a stainless steel conveyor with 4 sections of blades spaced evenly along the entire length of the frying area. Due to the high sides, the product floats freely in the frying zone; the blades immerse the product in oil, turn it over and move it towards the remote conveyor (the unloading part of the lower base belt). The movement and drive of the paddles is synchronized between the module and the base conveyor.
Operating principle
At the product inlet of this module, a separator is installed, which does not allow the product to stick together, while evenly dividing and distributing the product across the entire width of the conveyor, while the blades, turning over, advance the product along the entire working length. Thanks to this constant and uniform stirring, the product is evenly fried. The special curved shape of the blades reduces the likelihood of damage to fragile products during the frying process.
Other additional modules for the fryer:
- Second upper pressure conveyor for forced immersion of the product in oil to achieve deep frying
- Work table for the fryer out of food grade stainless steel
- Oil reservoir with a capacity of 75 liters* The reservoir can only be ordered together with the worktable, as a part of it
- Automatic hot oil circulation system** with filtration, suitable for pre-treatment of products at the inlet of the fryer - a “waterfall†of hot oil to pre-fry the product, close the pores of the product and reduce its sticking
*Oil volume 75 liters +- 5 liters.
**For the version with a work table and an oil reservoir
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
You might also like
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor and the paddle conveyor – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
- Material: Stainless steel
The combination of the compact 400/1100/12 fryer with the secondary upper pressure conveyor, allows you to expand the variety of products that can be fried on it. It ensures uniform, high-quality frying of fresh and semi-finished products in small to medium scale, making it suitable for small-scale production, professional kitchens and street food businesses. The fryer fully submerges the product in oil throughout the whole frying process with the help of the second pressure conveyor that forces the product beneath the oil's surface.
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200°C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
- Material: Stainless steel
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
- Productivity: 160 kg/15 min
- Material: Stainless steel
- Heating power, kW: 90/ 110/ 180
- Country of origin: Slovakia
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
- Material: Stainless steel
The price is set based on the basic built-in heating option of 24 kW.
The vacuum fryer is designed for frying foods in oil at low temperatures, allowing for the production of healthy snacks such as vegetable and fruit chips. The vacuum feature enables you to reduce the frying temperature of oil down to 110-120 degrees!
- «Cold roast» is a tasty and healthy method of processing the product
- Drying and frying without caramelizing the sugars contained in the product
- Large frying tank - for processing foods with a higher water content
- Modular heating system which allows you to increase the heating power up to 108 kW (optional)
- Circulating heating of oil through a heat exchanger minimizes oil spoilage and prevents localized overheating
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l
- Oil volume: 200l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
We sell different types of deep fryers, for a price quote or for a free consultation, please contact us by sending a request.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: EU
- Voltage: 380-400V
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
- Material: Stainless steel
- Type of the equipment: Optional equipment
The continuous production line for deep-frying and the subsequent cooling of semi-finished products includes:
- modular deep fryer with the option of choosing the conveyor type: a secondary conveyor for forced immersion of the product in oil or a conveyor with paddles for frying light floating products, such as chips;
- stainless steel table under the deep fryer with the option of installing an oil container and an oil filtration system inside it;
- cooling conveyor for removing excess oil and surface cooling of the product after frying it in the deep fryer.
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
We can help you choose the right continuous fryer suited for your needs.
- Productivity: nuts 400 kg/h
- Material: Stainless steel
- Heating power, kW: 30/ 60
- Operation mode: Automatic
- Principle of operation: Continuous mode
- Country of origin: EU
- Weight: 245 kg
- Working Area Width: 250 mm
- Oil volume: 100 l
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method which helps to close down the pores of the product to prevent excessive oil absorption. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Continuous mode
Automatic donut fryers are extremely efficient machines designed for easier production of doughnuts.Â
- Material: Stainless steel
- Operation mode: Automatic
- Type of the equipment: Individual machine
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
- Material: Stainless steel
- Heating power, kW: 72
- Principle of operation: Continuous mode
- Working Area Width: 420 mm
The extended version of the modular conveyor fryer with a large number of optional accessories, significantly expands the production capacity for deep-frying various products by increasing both the frying area and heating power.
- Frying time can be adjusted from several minutes up to an hour!
- Overheating safety sensors are installed on each heating element
- Compact support structure on a mobile support
- Fine-mesh conveyor grid allows for frying small and fragile products
- A large number of additional options in the form of automatic oil top-up system, loading conveyor, filtration system, cooling conveyor, etc.
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
An adjustable electric donut fryer with a continuous conveyor system is specially designed for small confectionery shops, pastry production and catering establishments. It is capable of frying a variety of products similar to donuts.
- Material: Stainless steel
- Heating power, kW: 12
- Country of origin: Slovakia




