Crispy Onion Fryer with a Centrifuge for deoiling
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product” after frying
- Low carbonization of oil due to the cleaning feature after frying
An atmospheric electric immersion fryer with a centrifugal system for removing excess oil is used both for laboratory purposes in large enterprises and small food processing businesses that work with various products in smaller volumes.
A deep fryer with a system for removing excess oil is the optimal solution for frying sliced or chopped products and small raw materials such as:
|
|
|
|
|
|
|
Advantages:
- The installation allows you to process products with a fragile structure and a small size; the basket has sections inside which the product is evenly fried.
- Constant circulation of oil through the built-in filtration system extends the life of the oil and reduces its carbonization.
- After a quick frying in hot oil, the product closes its pores, ensuring maximum retention of the beneficial substances contained inside and preventing oversaturation with oil.
- The centrifuge separator allows you to obtain a 'dry' product after frying with a minimal oil content!
Basic version
The installation consists of a frying container with an oil heating and storage bath, a built-in electrically driven centrifuge, a special pump for hot oil and a piping system connecting the frying section with the heating section. The heating control is located directly on the units body; the centrifuge rotation speed can be adjusted through the inverter. The basic version includes one sectional basket with a lid.
Principle of operation
A special feature of the installation is the ability to remove residual oil from the product, obtaining a dry product at the output. To achieve this, a special system that spins the basket with the product after draining the oil is used, where due to the centrifugal force, drops of oil located on the surface of the product are sprayed onto the walls of the working container and flow through the drain hole into the container for storing and heating the oil.
Options:
- Additional basket
- Basket lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
16 other products in the same category:
Our continuous fryer is designed for frying cutlets, potatoes, meatballs, croquettes, fish, vegetables and many other products. Working volume up to l: 300 l.
For a price quote, send us an email to sales@foodtechprocess.com
We can help you choose the right continuous fryer suited for your needs. For a free consultation or a quote, please send us an email at sales@foodtechprocess.com
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Stainless steel
- Slovakia
- 2x250l/ 3x250l
- 380-400V
- 2x175l/ 3x175l
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Electricity
- Stainless steel
- 12
- Continuous mode
- Slovakia
- 1100 mm
- 400 mm
- 380-400V
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
Optional module for 400/1100/12 Universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
Multifunctional pans function as a frying, cooking, and mixing device in one installation.
For more information on our automatic Wok-style frying pan with a built in mixer, please contact our sales department at sales@foodtechprocess.com
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
The automatic donut frying machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Stainless steel
- Continuous mode
- 3
- 220-230V
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
A donut fryer is special designed for small confectionery shops, industries and catering establishments. It is capable of frying of various products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@foodtechprocess.com
We offer different types of continuous fryers, let us know which product you wish to fry and we will help you choose the right fryer for your business.
For more information, contact us at sales@foodtechprocess.com
- Electricity
- Stainless steel
- Continuous mode
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
For additional information, please contact us at sales@foodtechprocess.com
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email to sales@foodtechprocess.com