Double Z sigma arm mixer
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
The multifunctional Z-shape double blade mixer is widely used in various industries: food, chemical, pharmaceutical, cosmetics and many others, where it is necessary to mix complex, heavy, thick and viscous products with a high degree of homogenization. Mainly, double z mixers are used for kneading thick, stiff dough in the confectionery industry as well as in the production of raw, muesli and protein bars, where it is necessary to obtain a thick, homogeneous mixture of cereals, honey, nuts, dried fruits, fondant and so on.
Best for mixing viscious pastes.Â
The Z blade mixer can be used to process and produce products such as:
|
|
|
|
|
|
|
|
|
|
Advantages:
- Independent drive for each Z-shaped blade with the ability to adjust the speed and direction of rotation. For each type of product it is possible to choose its own mixing diagram; each Z blade shaft can rotate in its own direction and at its own speed.
- The ability to choose the side of product unloading, the control system includes both tilting options up to 180 degrees.
- The control is located directly on the mixer; the basic version provides a semi-automat (semi-automatic control panel) with the possibility of individual settings for each system. As an option, an HMI touch screen with semi-automatic control can be installed on the side of the control panel. The HMI panel can be equipped with a memory module for creating and saving recipes.
- The special shape of the working container in the form of a small Greek letter ω allows for a minimum gap between the walls and the edge of the mixing device blade for highly efficient mixing, including bulk and powder products.
- High degree of safety: lid opening sensors and a working container position sensor, which guarantee safety for operator maintenance.
- Massive supporting structure for the stability of the mixer during operation and reduction of vibration.
- The mixer is made entirely out of food grade stainless steel AISI304; a stainless steel control panel can also be installed as an option.
- Automatic tilting system for the working container, depending on the volume and model, the tilt drive can be electric or hydraulic. Tilting is performed using a joystick mounted on the control panel, up to a maximum tilt angle of 180 degrees.
- Highly economical: mixers with two Z-shaped blades are the optimal choice for both small production and industrial-scale production, as they allow large volumes of product to be efficiently processed in a relatively small area.
- Hygienic design, easy maintenance and cleaning of equipment.
Basic version
The modification of the basic configuration includes a working container suspended on a supporting structure, inside of which special 2 Z-shaped blades, and a mixing device with an independent adjustable electric drive are installed. The working container is equipped with a lid and a control panel. The basic version includes a semi-automatic control panel (semi-automat), which allows you to adjust the direction, speed of rotation of the shafts with z-shaped blades, and automatically tilt the working bowl. In the basic configuration, tilting and unloading can be done in both directions.
Models
| Geometric volume, l   | Working volume, l      | Maximum load, kg         |
| 70 | 50 | 36-50 |
| 140 | 100 | 70 |
| 460 | 300 | 200 |
| 700 | 470 | 250 |
Options
- Control panel with a HMI panel (touch screen)
- Memory module with the ability to save recipes (when ordering the remote control option with an HMI panel)
- Control panel (electrical cabinet) made out of stainless steel
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 70l/ 140/ 300l/ 460/ 700l/
- Voltage: 380-400V
You might also like
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 150l/ 200l/ 500l
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
- Engine power, kW: 0,37/ 0,55/ 1,1
- Volume: 20l/ 75/ 100l
The NDM + drum mixer is designed for thorough mixing while retaining the structure of loose products without dead zones and with relatively low consumption and short mixing time. Made for mixing products such as coffee, tea, nutrients and supplements, baby food and many others.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 1000l
Used in chemical, construction, cosmetic or food industries.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Weight: 85
- Volume: 50l
- Voltage: 380-400V
The mixers are made up of a double-walled cylindrical stainless steel vessel with cavity, with drain hole and 50 cm diameter butterfly valve. The cavity is filled with water which is heated by an electric resistance thermostat. The honey is mixed by blades with a marine propeller profile, adjustable in height along an oblique shaft.Â
- Material: Stainless steel
- Engine power, kW: 0,37/ 0,55/ 1,1
- Principle of operation: Batch mode
- Volume: 100 kg / 250 kg/ 600 kg/ 1000 kg/ 2000 kg
The Mak Mix 100 L is a compact intensive plough mixer designed for fast and homogeneous mixing of dry products such as powders and granules. The unit operates on a ploughshare-type mixing principle using angled paddles, creating a dynamic fluidized mixing zone for efficient blending.
- Ploughshare-type mixer with angled paddles allows intensive mixing
- Fast and uniform mixing of powders and granular products
- Large bottom discharge hatch for quick and complete emptying
- Frequency converter (IP66) for adjusting the mixing speed
- Integrated safety sensor for lid opening
Stainlees steel free standing mixer for meat and dough.
- Material: Stainless steel
- Engine power, kW: 0,75 1,1
- Principle of operation: Batch mode
- Volume: 40 60l/ 80l/ 120l
The appropriate mixing equipment for drum processing depends upon the properties of the products and with the available drum opening.
- Type of the equipment: Individual machine
- Voltage: 230 V/ 380-400V
The periodic drum coating/seasoning machine is designed to saturate and infuse a diverse range of products with flavorful aromas, vitamins, and various taste additives. It is utilized in the production of snacks, chips, cereals, and nuts, offering a wide array of flavor enhancements.
- Mechanical system for tilting the working bowl with fixation points in intermediate positions
- Special perforated blades for gentle product turning
- Powerful drum rotation drive
- Entirely made out of food grade stainless steel AISI304
- Easy control via an inverter (optional): speed control and reverse
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Total power, kW: 0,55
The Mak Mix tilting mixer is designed for preparing liquid and semi-liquid doughs. It's suitable for mixing dough for waffles, pancakes, cakes, and other baked goods.
- Made entirely out of stainless steel
- Features a tilting system with multiple working positions (up to 110°) for gravity mixing and quick emptying of the mixing bowl
- Frame mixer with a professional industrial motor
- Reinforced high-speed mixer for intensive mixing and kneading
- Safety switch on the top housing for safe operation: the mixer is switched off when the lid is opened
- Simple and easy to clean; the lid and mixer can be quickly and easily removed for cleaning
- Material: Stainless steel
- Engine power, kW: 0,37/ 0,55
- Volume: 50l/ 100l
- Voltage: 220-230V
- Stirrer speed, rpm: 35
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The price is indicated without the frequency converter
A twin-screw mixer for fast and intensive mixing, stirring of bulk solid products, such as granules, muesli with various powder additives.
- The mixing blades carefully move while thoroughly mixing the product
- The mixing mode allows you to move the product cyclically in a circle
- High mixing efficiency due to the counter-movement of the 2 shafts
- Compact design
- Possibility to install scrapers on each blade (optional)
- Reinforced drive, can be used for products saturated with moisture as well
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Volume: 500l
- Total power, kW: 3
The vacuum cutter is intended for large processing enterprises dealing in the confectionery, fruit and vegetable processing industries. They are intended for processing food down to a homogenous mixture with minimal air content.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Voltage: 380-400V
The tank is designed for heating and mixing chocolate, butter, margarine, honey and similar products.
- Material: Stainless steel
Butter churner with a volume of 50 L and a usable volume of 25 L for the traditional production of butter from cream.
- Material: Stainless steel
- Engine power, kW: 0,55
- Geometric volume: 50 l
The VMG S 650P vacuum homogenizing unit can be used for making toothpaste as well as a variety of similar products with complex production requirements.
- The vacuum ensures effective air removal, eliminating the conditions for the development of bacteria and other pathogenic organisms.
- The special shape of the mixing device is tailored for the thickest and most viscous products.Â
- The Ultra Shear submersible homogenizer creates a stable emulsion.
- The cavitation processes aid in activating hydrodynamic mixing.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 29
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 650l
- Total power, kW: 52
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
A vacuum diffuser is a device used in the food industry to remove oxygen from a product under vacuum conditions, primarily employed for enhancing the preservation of food by reducing oxidation and extending shelf life.
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: Slovakia
- Volume: 200l/ 1000l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
An evaporating unit is utilized to remove moisture from sweet substances through heating, transforming them into concentrated syrups or solutions.
- Material: Stainless steel
- Heating power, kW: 30
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Voltage: 380-400V
- Geometric volume: 200 l
The Homogenizer F230 is a compact industrial processing unit designed for controlled heating or cooling, homogenization, and mixing of food products. The unit is equipped with a high-speed bottom-mounted homogenizer, an optional anchor stirrer, and a jacketed vessel (duplicator) for thermal processing, enabling stable product structure formation within a single installation.
- Built-in high-speed homogenizer for efficient particle size reduction
- Three-layer vessel with a jacket for heating or cooling (up to 0.5 bar)
- Optional frame mixer with adjustable speed via frequency converter
- Compact hygienic design for batch processing up to 200 L
- Suitable for homogenization, thermal processing, and fermentation-based applications
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 200l