Double Z sigma arm mixer
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
The multifunctional Z-shape double blade mixer is widely used in various industries: food, chemical, pharmaceutical, cosmetics and many others, where it is necessary to mix complex, heavy, thick and viscous products with a high degree of homogenization. Mainly, double z mixers are used for kneading thick, stiff dough in the confectionery industry as well as in the production of raw, muesli and protein bars, where it is necessary to obtain a thick, homogeneous mixture of cereals, honey, nuts, dried fruits, fondant and so on.
The Z blade mixer can be used to process and produce products such as:
|
|
|
|
|
|
|
|
|
|
Advantages:
- Independent drive for each Z-shaped blade with the ability to adjust the speed and direction of rotation. For each type of product it is possible to choose its own mixing diagram; each Z blade shaft can rotate in its own direction and at its own speed.
- The ability to choose the side of product unloading, the control system includes both tilting options up to 180 degrees.
- The control is located directly on the mixer; the basic version provides a semi-automat (semi-automatic control panel) with the possibility of individual settings for each system. As an option, an HMI touch screen with semi-automatic control can be installed on the side of the control panel. The HMI panel can be equipped with a memory module for creating and saving recipes.
- The special shape of the working container in the form of a small Greek letter ω allows for a minimum gap between the walls and the edge of the mixing device blade for highly efficient mixing, including bulk and powder products.
- High degree of safety: lid opening sensors and a working container position sensor, which guarantee safety for operator maintenance.
- Massive supporting structure for the stability of the mixer during operation and reduction of vibration.
- The mixer is made entirely out of food grade stainless steel AISI304; a stainless steel control panel can also be installed as an option.
- Automatic tilting system for the working container, depending on the volume and model, the tilt drive can be electric or hydraulic. Tilting is performed using a joystick mounted on the control panel, up to a maximum tilt angle of 180 degrees.
- Highly economical: mixers with two Z-shaped blades are the optimal choice for both small production and industrial-scale production, as they allow large volumes of product to be efficiently processed in a relatively small area.
- Hygienic design, easy maintenance and cleaning of equipment.
Basic version
The modification of the basic configuration includes a working container suspended on a supporting structure, inside of which special 2 Z-shaped blades, and a mixing device with an independent adjustable electric drive are installed. The working container is equipped with a lid and a control panel. The basic version includes a semi-automatic control panel (semi-automat), which allows you to adjust the direction, speed of rotation of the shafts with z-shaped blades, and automatically tilt the working bowl. In the basic configuration, tilting and unloading can be done in both directions.
Models
| Geometric volume, l   | Working volume, l      | Maximum load, kg         |
| 70 | 50 | 36-50 |
| 140 | 100 | 70 |
| 460 | 300 | 200 |
| 700 | 470 | 250 |
Options
- Control panel with a HMI panel (touch screen)
- Memory module with the ability to save recipes (when ordering the remote control option with an HMI panel)
- Control panel (electrical cabinet) made out of stainless steel
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Voltage: 380-400V
You might also like
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
- Engine power, kW: 0,37/ 0,55/ 1,1
The NDM + drum mixer is designed for thorough mixing while retaining the structure of loose products without dead zones and with relatively low consumption and short mixing time. Made for mixing products such as coffee, tea, nutrients and supplements, baby food and many others.
For additional information, please contact us at sales@foodtechprocess.com
Butter churner with a volume of 50 L and a usable volume of 25 L for the traditional production of butter from cream.
For more information, contact our sales department at sales@foodtechprocess.com
Multifunctional vacuum mixer/homogenizer for grinding, mixing, and homogenizing products to obtain homogeneous masses.
- Built-in jacket for the bottom and walls of the unit.
- Cutter knives with a powerful electric drive
- Slanted design for efficient mixing and chopping
- Forced circulation circuit (optional)
- Wide range of options
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 350l/ 650l
- Total power, kW: 13/ 17
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The price is set for the basic version of the vacuum evaporation unit, without additional options and with minimal controls (mixer motor switch). The control unit is customized based on individual customer requirements.
A compact vacuum evaporation unit that allows you to concentrate solutions, mixtures, and various products by evaporating the solvent. A modular version based on the basic 110/100 vacuum reactor.
- Gravity mixing - 25% more efficient
- Reinforced agitator design with no blind spots
- Bottom ball valve with no dead zones
- Condensation and secondary vapor removal system
- Easy to disassemble mixing device
- Large heat exchange area
- Ability to measure and monitor condensate volume (optional)
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Volume: 100l
- Max vacuum: -0,8 Bar
- Duplicator volume: 3l
- Working volume: 70-100l
- Heat transfer area, m2: 1,05
- Water evaporation, l/h: 60
- Steam consumption, kg/hour: 150
The laboratory vacuum cutter mixer is designed for uniform grinding, emulsifying and mixing of food, cosmetic and pharmaceutical products, chemical mixtures with the addition of oil, dyes, concentrates or liquid flavors.
The twinscrew mixer with two horizontal shafts is designed for intensive mixing and kneading dough as well as chocolate, pralines and other similar products with medium or high viscosity.
For a price quote, send us an email to sales@foodtechprocess.com
SIPM 10 liter pasta mixer is designed for medium size commercial operations, ideal for medium-size restaurants to produce any kind of pasta such as spaghetti, taglia pasta, cannelloni, macaroni, conchiglie, rigatoni, penne and many others. The price includes a pasta cutter.
For more information, send us an email at sales@foodtechprocess.com
The conical bottom mixer with a 400-liter capacity is designed for efficient mixing and smooth product discharge. Its conical shape directs contents toward the lower outlet, making it ideal for processing thicker or denser materials in an atmospheric-pressure environment.
The VMG S 650P vacuum homogenizing unit can be used for making toothpaste as well as a variety of similar products with complex production requirements.
- The vacuum ensures effective air removal, eliminating the conditions for the development of bacteria and other pathogenic organisms.
- The special shape of the mixing device is tailored for the thickest and most viscous products.Â
- The Ultra Shear submersible homogenizer creates a stable emulsion.
- The cavitation processes aid in activating hydrodynamic mixing.
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 29
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 650l
- Total power, kW: 52
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The appropriate mixing equipment for drum processing depends upon the properties of the products and with the available drum opening.
For more information contact sales department at sales@foodtechprocess.com
Homogenizer for the production of whipped cream, ice cream, and much more. It allows you to obtain stable liquid emulsions of food mixtures.
- The homogenizer can be installed directly into the container with the product
- High productivity - in just 8 minutes, it is possible to whip up to 60 liters of milk mixture
- The peripheral speed of the knives is 16 m/s
- Engine power, kW: 0,37/ 2,2
- Voltage: 380-400V
These meat tumblers are designed for removing air and drawing moisture and marinade into the meat under the conditions of a vacuum.
The industrial planetary mixer is mainly used in the confectionary industry. Available in three different sizes: 120, 140 and 170 L.
For more information please contact our sales department at sales@foodtechprocess.com
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
For additional information, please contact us at sales@foodtechprocess.com
The CH 300 Vacuum Cooking Equipment is a high-performance system tailored for professional kitchens and industrial facilities, streamlining production processes with its advanced vacuum and mixing technology, ensuring superior flavor and texture in food preparation.
 For more information, send us an email at sales@foodtechprocess.comÂ
