Mixing tank for heating or cooling ACM 2060
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
Normit ACM 2060 mixing tank is designed for cooling, heating, tempering, storing and mixing of thick viscous products.
By using a separate tank for cooling/ heating/ tempering the product, a significant increase in processing equipment capacity is achieved and limits energy losses due to alteration of heating and cooling cycles.
Possible processes:
- Mixing
- Heating
- Tempering
- Cooling
- Storing
Suitable products:
- Mayonnaise
- Sour cream
- Creams
- Sauces
- Condensed milk
- YoghurtÂ
- Fruit and vegetable puree
- CaramelÂ
- Toffee mass
- OilsÂ
- Chocolate and others

Specially designed stirrer with scrapers
Special design of mixer with scrapers. The reinforced slow speed agitator has been specially designed for mixing thick viscous products, since mayonnaise and similar products tend to thicken significantly and become more viscous when cooling down. The product does not break down and does not get separated into fractions during the process of mixing, and inclusions are not damaged.
Advantages:
- Heating/ cooling jacket
- Maximum surface of heat exchange. 99% of the surface of the walls and the bottom of the tank is a highly efficient Pillow Plate type heat exchanger.
- High intensity of heat exchange. The special design of the heat exchanger allows using a coolant under pressure, as well as ensuring intensive circulation along the entire surface of the cooling jacket, without any dead spots
- The scrapers come in contact with 99% of the surface of the walls and of the bottom of the tank, which guarantees a continuous and efficient process of cooling at the maximum possible level.
- The tank can be completely disassembled, which makes cleaning and inspection easy and convenient.
- The large frame ensures the stability of the unit even in the case of tank with large volumes,
- The device can be disassembled with minimal efforts.
Technical features:
- Material: Stainless steel
- Principle of operation: Batch mode
You might also like
The hot water tank is designed to catch the preheated water from the first stage of the wort cooling and then heat it to 80 ° C, the pump bowl is a part of the vessel.Â
- Material: Stainless steel
- Type of the equipment: Individual machine
- Volume: 2000
This open tank is intended for washing the juice tanks. Kapacity 250L. For more information, send us a request.Â
- Material: Stainless steel
- Volume: 250l/
The cooling tank is designed for storing milk and other beverages.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: EU
The atmospheric tank with an inclined design is used for mixing, stirring, and dissolving various products. By supplying a thermal carrier to the unit’s jacket (duplicator) from an external source, thermal processing such as heating or cooling can occur (i.e. heating or cooling from an external coolant source with an inlet pressure of up to 0.5 bar). These units are widely utilized in the food and cosmetic industries.
- Inclined design: 50% more efficient mixing
- Due to the inclination angle of the working tank, rapid and complete (100%) emptying is achieved.
- Efficient heat transfer through the heating/cooling jacket
- No dead zones during mixing!
- Modular system with a wide range of additional options
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: Slovakia
- Working volume: 100l/ 200l/ 300l/ 450l/ 600l/ 900l
This equipment is often used for temporary storage and transportation of liquid products, equipped with a specially shaped stirrer and heating / cooling "jacket".
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Voltage: 380-400V
The cylindrical conical tank is a designed for the fermentation of the beer and other beverages.Â
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
The cooling tank is designed for storing milk and other beverages.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: EU
Multifunctional vacuum mixer/homogenizer for grinding, mixing, and homogenizing products to obtain homogeneous masses.
- Built-in jacket for the bottom and walls of the unit.
- Cutter knives with a powerful electric drive
- Slanted design for efficient mixing and chopping
- Forced circulation circuit (optional)
- Wide range of options
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 350l/ 650l
- Total power, kW: 13/ 17
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
A vacuum evaporator is a device used to evaporate liquids at lower temperatures by creating a vacuum environment, which reduces the boiling point of the liquid and enables efficient evaporation without thermal degradation of sensitive materials. Working volume up to, l: 1900 l.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 30
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Working volume: up to 1900 l
The cost is indicated without the control panel, which can be selected and offered separately
A versatile cooking system, featuring an inclined reactor, a duplicator for heating and a frame mixing device, it is designed for processing a diverse range of products through methods such as cooking, boiling, and concentrating at atmospheric pressure. This system is commonly used for the production of syrups, jams, confiture, and honey processing.
- Slanted design with gravity mixing - 25% more efficient!
- External decorative casing made out of polished stainless steel with insulation
- Jacket for the bottom and the walls of the working container along the entire height
- Lid opening sensor for safe operation
- Scrapers are already included in the basic version of the installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 300l/ 430l/ 600l/ 1000l
- Voltage: 220-230V 380-400V
The vacuum crystallizer-cooler is specifically designed for sweetened condensed milk. Crystallization with cooling is one of the most important stages in the production of condensed milk according to GOST and is necessary before dosing and packing the finished product.
- After crystallization, condensed milk has a delicate structure with small crystals
- Condensed milk has a homogeneous shape and attractive consumer properties
- The shelf life of condensed milk is extended without changing the quality of the product
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 300l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The sorption filter 3000l refers to non-pressure equipment of periodic action for filtering liquids using bulk filtering agents and different sorbents.
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: Slovakia
- Volume: 3000
A circulation-type vacuum evaporator refers to a combined version of an evaporator that also takes advantage of other types to improve evaporation efficiency particularly by reducing concentration time and when processing heat-sensitive products such as milk.
- The external circulation circuit with heating intensifies the cyclic evaporation process.
- The forced circulation system ensures a decrease in the risk of localized product overheating.
- The condenser enables a deep vacuum and maintains a low evaporation temperature.
- Utilizing a mixing device with a spray system facilitates product evaporation in a thin layer, mimicking a film-type evaporator.
- Heating: Steam
- Material: Stainless steel
- Operation mode: Semi-automatic
- Country of origin: Slovakia
- Total power, kW: 2,4
- Voltage: 380-400V
The vacuum batch dryer is suitable for gentle and high-quality dehydration to obtain a product with low solvent/moisture content.
- Special stirrer for uniform heat distribution and mixing
- Drying of heat-sensitive wet solids
- Suitable for the separation of suspensions and drying extracts
- Low processing temperature due to a deep vacuum
- Material: Stainless steel
- Volume: 300l/ 600l/
Tilting bratt pans with mixer are frying the product with continuous stirring. Designed for catering industry, school kitchens, restaurants and food industry. Variants of heating systems: direct electric and direct gas. Capacity: 150, 200 or 300l.
- Material: Stainless steel
- Engine power, kW: 0,75
- Heating power, kW: 42
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: EU
- Volume: 150l/ 200l/ 300l
- Voltage: 380-400V
It is ideal for cooking jams, marmalades, syrups, sauces, creams and other products.
Price depends on the chosen option.Â
- Heating: Electric
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 300l
- Geometric volume: 350 l
A Vacuum cooker is a versatile device used in culinary settings to cook food under vacuum conditions, enhancing flavors and textures while also reducing cooking times.
We offer various different cookers.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
The vacuum homogenizer with an inclined design is designed for processing and manufacturing a wide range of liquid, pasty and viscous products with different requirements for their production conditions and other products including those with a high viscosity.
- Material: Stainless steel
- Engine power, kW: 1,5 KW
- Principle of operation: Batch mode
- Country of origin: Slovakia
The price is set for the basic version of the installation without additional equipment.
The vacuum homogenizer is designed for a wide range of processes such as for the production of mayonnaise, ketchup, various sauces, confectionery pastes and fillings, liquid or paste like products with a homogeneous structure. It is also suitable for the production of various creams, gels, shampoos and other products in the cosmetic industry.
- Built-in Ultra Shear bottom homogenizer
- Mixing device with movable scrapers
- Tilting version for easy unloading
- Wide range of applications
- Entirely made of food grade stainless steel AISI304/ AISI316 - option
- Compact design
- Lots of additional options to choose from
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 20l/ 50l
- Total power, kW: 2,3/ 2,4
- Voltage: 220-230V
- Max vacuum: -0,8 Bar
Vacuum evaporator with remote circulation using a heat exchanger is one of the most efficient evaporation methods. This evaporation system is suitable for boiling and concentrating heat-sensitive products such as milk, cream, etc.
- No mixing device required, the product has forced circulation!
- Modular system: possibility to choose the vacuum generator, power and heat exchanger type
- Inclined design and bottom valve for 100% product discharge without losses and blind spots
- Insulated upper hatch of the unit for heat retention and safety
- Tangential product inlet into the vacuum vessel for guaranteed evaporation in a thin layer
- Material: Stainless steel
- Volume: 50l/ 100l/ 300l
Vacuum mixer processing plant for viscous products is an ideal solution for the production of pilot batches and the industrial manufacturing of a wide range of products from small to medium capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 50l