Flow-through water heater up to 110° C
A flow-through water heater is a device for flow-through electric heating of water in heating systems for cooking boilers, evaporators and other units where it is necessary to supply a hot heat transfer medium - superheated water - to the heating jacket (duplicator). When choosing a flow-through heater, it is necessary to select a circulation pump based on the volume of the jacket or heat transfer vessel.
- The heater allows you to heat water up to 110 degrees
- Easily integrated into heating systems
- Has heating temperature regulation
- 2 stages of heating power adjustment
- Independent control panel with protection against overheating and "dry" running
Flow-through heaters are installed as a source of hot water supply in heating systems for cooking boilers, vacuum evaporators and other industrial equipment. They allow the supply of a heat transfer medium - hot water to the heating jacket for processes like cooking, blanching, concentrating, boiling down, heating various products. To connect the heater to a heating system, it is recommended to select additional equipment based on the technical requirements of the heating system, such as a circulation pump and an expansion tank.
The hot water supply source of up to 110°C is a compact and cost-effective solution for flow-through heating systems in cooking boilers, vacuum evaporators, reactors, mixers, pasteurizers, where heating is carried out through a heating jacket. It can also be used in heating systems for livestock drinking bowls.
Advantages
- Superheated 110°C water source provides effective heating with the ability to select power from 2 to 12 kW.
- Low heat loss due to a special insulated thermal casing.
- Compact size, with the option to mount the heater directly onto the unit using special mounting brackets.
- Simple and easy replacement of heating elements during service.
- High level of safety: protection of heating elements from overheating and "dry" running.
- Water heating temperature can be set and adjusted directly on the heater.
- Independent control panel with the ability to select heating power levels.
Basic version
The heater comprises a heat exchanger with installed heating elements, a protective casing, safety and control systems, and a control panel.
Operating principle
The heater is designed for electric flow heating systems with a jacket (duplicator) for hot water serving as a thermal transfer medium, maintaining the set temperature of the product inside a tank, reactor, or chamber through continuous circulation of the thermal medium within the system.
Options
- circulation pump
- expansion tank
- high temperature hoses
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 2/ 3/ 6/ 9/ 10/ 12
- Principle of operation: Continuous mode
You might also like
The price is set for the basic version of the vacuum evaporation unit, without additional options and with basic controls (mixer motor switch). The control unit is customized based on individual customer requirements.
A compact vacuum evaporation unit that allows you to concentrate solutions, mixtures, and various products by evaporating the solvent. A modular version based on the basic version of the 110/100 vacuum reactor.
- Gravity mixing - 25% more efficient
- Reinforced agitator design with no blind spots
- Bottom ball valve with no dead zones
- Condensation and secondary vapor removal system
- Easy to disassemble mixing device
- Large heat exchange area
- Ability to measure and monitor condensate volume (optional)
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 220-230V
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
- Condensing capacity, l/h: 45-55
- Steam consumption, kg/h: up to 150
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum vessel with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum cooking kettle, and a unit for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The circulation pump for the heating system is a mandatory component for the operation of a flow-through heating system used for heating the water serving as a heat transfer medium inside the duplicator of industrial cooking boilers, mixers, reactors, and vacuum evaporators in food production. It is selected based on the required parameters of the heating system (volume). Our specialists will be happy to assist you in selecting the appropriate pump if you provide the technical specification requirements. This pump is an essential additional component for the flow-through water heater up to 110°C.
- It can be used to circulate water at temperatures up to 110° C
- High efficiency with low power consumption
- Also suitable for central heating systems, heated floors and even for solar systems
- Small connections allow the use of flexible pipes with a smaller diameter
- Type of the equipment: Optional equipment
The device is designed for generating hot air by burning wood as well as other flammable materials.
For more information, please contact us at sales@foodtechprocess.com
- Type of the equipment: Individual machine
The durable single gas stove serves a versatile purpose, suitable for heating large cooking kettles. 7 kW.
- Heating: Gas
- Heating power, kW: 7
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.
For more information about the machine contact sales department sales@foodtechprocess.com
The 5 kw stool-type electric heating stove with a diameter of 40 cm is designed to heat large pots and pans with a volume of up to 100 liters.
For additional information, please email us at sales@foodtechprocess.com
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Type of the equipment: Optional equipment
The generator is mounted on a stainless steel platform support, covered with stainless steel AISI 304 properly shaped with electrical and water connections already made. Stainless steel cocks AISI 316, malleable iron pipe fittings, feed water pump (mod. TP78A CALPEDA) with 1 stainless steel non-return valve, with VITON seal.
For additional information, please email us at sales@foodtechprocess.com
- Heating power, kW: 24/ 32/ 48
Electric steam generator with capacity of 2*24.5 liters - meets PED standards - with double or single resistance.
Professional electric steam generator with a 25-liter water tank, fitted with an automatic pump. The power used in the heater is 20000W.
For more information, send us an email to sales@foodtechprocess.com
- Heating power, kW: 9/ 18
- Type of the equipment: Individual machine
- Voltage: 380-400V
Vertical steam generators with horizontal pipes that take up a compact area. Price on request.
- Material: Stainless steel
Electric steam generator with capacity of 57 liters - meets PED standards - with double or single resistance.
The stove is sold with an additional frame designed for a load of up to 200 kg!
Induction cooker - 5000 W - 230 V - the best alternative to electric and gas stoves. Using an induction cooker significantly reduces energy costs and air pollution, making it ideal for any small kitchen.
- 5 heat levels
- Connection - 230 Volt
- Compact dimensions: 410x500x200 mm
- Temperature range from 60 to 280 degrees
- Heating power, kW: 5
- Voltage: 220-230V
Electric steam generator with capacity of 24.5 liters - meets PED standards - with double or single resistance.
Electric heating panel with three different power possibilities: 12, 24 and 48 KW – excellent product manufactured by people who perfectly know the secret of product storage, maintenance and processing.
For more information please email sales@foodtechprocess.com
- Heating power, kW: 12/ 24/ 48
- Country of origin: EU