Powered by Smartsupp
Filter by
Price
€ €
Manufacturers
Filter
Shipment of a condensed milk production line
We have recently shipped a condensed milk production line to Turkmenistan.
Cooking kettle testing – Sugaring paste
We uploaded a new video demonstrating the production of sugaring paste on our cooking kettle
Colloid mill test – almond paste
We have recently tested our small-scale colloid mill on almonds.
Vacuum honey creaming unit
The honey creamer began operation at our customer’s production facility.
New video release
A new video showcasing the working process of the twin shaft paddle mixer.
Test results - Vacuum fryer
New video showcasing the results of the tests using our vacuum fryer.
Colloid Mill Test - Oats
The results of a new series of tests conducted on our colloid mill.
New design of the mixing device
We have updated the mixing device of our compact cooking kettle.
View all news articles

SNACKS, NUTRITIONAL SUPPLEMENTS

This continuous conveyor deep fryer is a reliable and versatile solution suitable for high-performance frying of a wide range of products by immersing them in hot oil.

  • Universal application
  • Quick transition for frying new types of products
  • Possibility of using special frying modes
  • Minimal amount of oil in the system
  • Trouble-free oil filtration
  • High oil exchange ratio
  • High efficiency and productivity with compact design
  • Manufactured to the highest quality standards using materials and components made in Europe.
  • Heating: Electricity
  • Material: Stainless steel
  • Principle of operation: Continuous mode

The vacuum drying oven is ideal for the controlled and rapid drying and heat treatment of heat-sensitive or fragile products, materials and electronic components. Vacuum drying means sensitive samples are not at risk of contamination from suspended solids and the risk of oxidation is significantly reduced.

  • Integrated vacuum system with a high vacuum pump
  • Built-in vapor removal and condensation system
  • Built-in refrigeration machine
  • Shelves with built-in heating
  • Material: Stainless steel
  • Principle of operation: Batch mode
  • Volume: 130l
  • Voltage: 380-400V

Our hydrodynamic extraction line is designed for extracting various components from plant materials, including biologically active substances, proteins, fats, carbohydrates, antioxidants, dyes, and flavors.

  • Effective “soft†continuous hydrodynamic extraction – percolation from finely crushed raw materials.
  • Extraction without the need for pre-drying the product, resulting in savings on labor and energy costs.
  • Utilizing raw materials without heat treatment, preserving all of their valuable substances and enzymes.
  • Possibility of performing vacuum-pulse extraction (optional).
  • Additional income from processing “waste†products - extracting valuable components from pulp and pomace.
  • Material: Stainless steel
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia

Equipment for mixing multi-component mixtures of products, such as vegetable salads with various dressings, including thick and viscous ones like mayonnaise, thick sour cream and other similar sauces.

  • Hydraulic tilting system is included in the basic version
  • The controls are located directly on the frame supporting structure
  • Eccentrically offset working shaft for rotating/tilting the working tank
  • Low loading height
  • The installation is made entirely out of food grade stainless steel
  • Material: Stainless steel
  • Operation mode: Mixed
  • Principle of operation: Batch mode
  • Country of origin: Slovakia
  • Volume: 600l/ 1000l

The price is set for the combination of a basic fryer model and an additional module with rotating paddles.

The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.

You can send us a request at sales@foodtechprocess.com

  • Adjustable frying time from a few seconds up to an hour
  • Compact, tabletop version
  • The paddle conveyor is installed on top of the basic fryer
  • Safety thermostats on each heating element
  • Heating: Electricity
  • Material: Stainless steel
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia
  • Working Area Length: 1100 mm
  • Working Area Width: 400 mm
  • Total power, kW: 12
  • Oil volume: 60l
  • Voltage: 380-400V
Continuous double conveyor deep fryer 400/1100/12
  • -10%

 

The combination of the compact 400/1100/12 model fryer with the secondary upper pressure conveyor allows you to expand the variety of fried products. It is suitable for ensuring uniform, high-quality frying of products in small-scale production, professional kitchens and street food businesses by fully submerging the product in oil throughout the frying process.

  • The maximum height of the fried product is - up to 50 mm
  • Immersion thermometer for visual monitoring of the oil temperature
  • Frying time can be set from a few seconds up to an hour!
  • High temperature – up to 200C
  • The conveyor belt is made out of a food-grade stainless steel thin mesh
  • Heating: Electricity
  • Material: Stainless steel
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia
  • Working Area Length: 1100 mm
  • Working Area Width: 400 mm
  • Total power, kW: 12
  • Oil volume: 60l
  • Voltage: 380-400V

The conveyor is made out of strong and highly-resistant stainless steel. It is also additionally reinforced for reliability during operation.

For additional information, please contact us at sales@foodtechprocess.com

For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.

  • Two in one: a deep fryer and a centrifuge to remove excess oil
  • Possibility of frying small and fragile products
  • Obtaining a “dry product†after frying
  • Low carbonization of oil due to the cleaning feature after frying
  • Material: Stainless steel
  • Principle of operation: Batch mode
  • Country of origin: Slovakia
  • Volume: 30l/ 90l
  • Total power, kW: 11
  • Voltage: 380-400V

The set of individual equipment for the production of French fries may differ depending on the initial raw materials. We offer various modifications from washing to frying with subsequent dehumidification starting from 50 kg/h for the final product.

For more information, please contact us at: sales@foodtechprocess.com

The price is set for the basic version, without additional options.

The industrial infrared dryer is suitable for drying a wide range of products: nuts, apples, plums, strawberries, raspberries, blueberries, mushrooms, carrots, onions, garlic, herbs, meat, figs, bananas, marshmallows. If additional options are selected, it can also be used for curing and drying whole meat and fish.

  • Compact installation
  • Fast and efficient drying
  • Possibility of selecting individual settings for drying
  • Made entirely out of stainless steel
  • The interior surface of the cabinet has a mirror coating
  • Quiet operation of the installation
  • Low energy consumption per drying cycle
  • Heating: Electricity
  • Material: Stainless steel
  • Operation mode: Mixed
  • Principle of operation: Batch mode
  • Country of origin: Slovakia
  • Volume: 7l/ 10l/ 14l
  • Total power, kW: 10/ 15/ 20
  • Area, m2: 3,5/ 5,2/ 6,9
  • Number of shelves: 10/ 15/ 20

The price is set based on the basic built-in heating option of 24 kW.

The vacuum fryer is designed for frying foods in oil at low temperatures, allowing for the production of healthy snacks such as vegetable and fruit chips. The vacuum feature enables you to reduce the frying temperature of oil down to 110-120 degrees!

  • «Cold roast» is a tasty and healthy method of processing the product
  • Drying and frying without caramelizing the sugars contained in the product
  • Large frying tank - for processing foods with a higher water content
  • Modular heating system which allows you to increase the heating power up to 108 kW (optional)
  • Circulating heating of oil through a heat exchanger minimizes oil spoilage and prevents localized overheating
  • Heating: Electricity
  • Material: Stainless steel
  • Heating power, kW: 24
  • Principle of operation: Batch mode
  • Country of origin: Slovakia
  • Volume: 30l
  • Oil volume: 200l
  • Voltage: 380-400V
  • Max vacuum: -0,8 Bar
Vacuum fryer VF30
1 in stock

The price is set for the model with an area of 7 m²

Compact condensate dryer, heat pump powered dehydrator for drying vegetables, fruits, berries, mushrooms, legumes and grains.

  • Energy saving, low consumption model (consumption up to 0.9 kW/h)
  • Possibility of increasing the drying area in this model up to 14 m² (optional)
  • Intensive drying, each section is equipped with a heat pump
  • Automatic drying system control
  • Delicate drying at low temperatures
  • Preservation of most nutrients and the products natural color
  • Material: Stainless steel
  • Principle of operation: Batch mode
  • Country of origin: Slovakia
  • Total power, kW: 0,9
  • Voltage: 220-230V
  • Area, m2: 7
  • Number of shelves: 22

The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.

For additional information, please contact us at sales@foodtechprocess.com

PANNING, COATING MACHINES

The device was primarily designed to increase dough adhesion (adhesion) by using a thin layer of dust - flour. The device is available in four widths of 200, 300, 400 and 600 mm.

For more information on the breading machine, contact our sales department at sales@foodtechprocess.com

This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.

For more information about the machine contact sales department sales@foodtechprocess.com

The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.

  • Innovative design: a compact continuous paddle fryer for professional kitchens
  • Intensive three-zone heating using thermal controllers for each heating element
  • Specially designed blades along the entire length of the fryer to immerse the product in oil
  • Frying time can be set from a few seconds up to an hour
  • Product agitation system during loading for product separation
  • Thermal insulation of the working body to reduce heat loss and for safer operation
  • Heating: Electricity
  • Material: Stainless steel
  • Heating power, kW: 12
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia
  • Working Area Length: 1100 mm
  • Working Area Width: 400 mm
  • Voltage: 380-400V

A donut fryer is special designed for small confectionery shops, industries and catering establishments. It is capable of frying of various products similar to donuts.

For more information, please contact us at sales@foodtechprocess.com

We offer professional infrared dryers from 8 to 56 trays with a capacity of 200 to 3000 kg/day for vegetables, fruits, tea, herbs, mushrooms, medicinal herbs and other products. The dryers of this type is a turnkey solution based on two technologies - direct infrared and air convection drying.

For more information about the dryer, contact our sales department at sales@foodtechprocess.com

We offer new compact continuous infrared oven that is designed for backing different variants of products such as falafel, meat and vegetable balls, chicken wings, nuts, pizza, baguettes, toasts, croutons and many other snacks. 

For more information, send us an email to sales@foodtechprocess.com

The bucket elevator is designed for transporting loose bulk materials, such as grain and seeds in a vertical position. It's an ideal solution for transporting various products for the baking industry as well as animal feed and other granular productions.

For more information, send us an email at sales@foodtechprocess.com

Batter breading machines are designed for batter breading products such as meatball, hamburgers, soya, vegetarian burgers, croquettes, vegetables and other products. The machine is suitable for catering companies as well as big productions.

For more information, write to us at sales@foodtechprocess.com

The screw conveyor with heating is a device designed for the transportation of material using a screw mechanism, while heat is applied to the product to facilitate easier transfer. This type of conveyor is often used to simplify the transfer of various bulk materials.

For more information, send us an email to sales@foodtechprocess.com

Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product and size of the conveyor.

For more information, send us an email to sales@foodtechprocess.com

Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product and size of the conveyor.

For more information, send us an email to sales@foodtechprocess.com

Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product and size of the conveyor.

For more information, send us an email to sales@foodtechprocess.com

A universal conveyor with a PVC belt with horizontal sections, a volumetric storage, adjustable in height and angle of inclination, which can easily be adapted to existing installations for lifting the product to a certain height. The conveyor has its own independent drive, the speed of which can be adjusted using an inverter (optional).

  • Lightweight: the supporting structure of the conveyor is made out of aluminum profiles
  • Hopper made out of food grade stainless steel
  • Bearing frame on wheeled supports with position locks
  • High sidewalls made out of stainless steel
  • White PVC tape for transporting products with temperatures of up to 80 degrees
  • Engine power, kW: 0,25
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia
  • Working Area Width: 500 mm
  • Volume: 50l/

The price is indicated with a semi-automatic control panel

The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.

  • A unique multifunctional device
  • Possibility to cook/fry under atmospheric or vacuum conditions
  • Laboratory version of a Vacuum Fryer
  • Built-in condensation and secondary steam removal system
  • Intense electric heating
  • Sectional basket with a lid
  • Built-in system for separating and removing excess liquid from the product
  • Heating: Electricity
  • Material: Stainless steel
  • Heating power, kW: 5
  • Volume: 10l
  • Oil volume: 8l
  • Voltage: 380-400V
  • Max vacuum: -0,8 Bar

An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.

For a price quote or a free consultation, send us an email to sales@foodtechprocess.com

EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.

For a quote, please send us an email at sales@foodtechprocess.com

The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.

For more information please send us an email at sales@foodtechprocess.com

Our continuous fryer is designed for frying cutlets, potatoes, meatballs, croquettes, fish, vegetables and many other products. Working volume up to l: 300 l.

For a price quote, send us an email to sales@foodtechprocess.com

A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.

Price depends on the chosen option. Please email sales@foodtechprocess.com

PANNING, COATING MACHINES

A rotating drum unit designed for continuous coating and seasoning operations as well as product saturation with spices and flavor additives, utilized in production lines for chips, snacks, and various semi-finished products.

  • Adjustment of the Drum Tilt Angle
  • Hygienic design and execution: mirror-polished inner surface of the drum
  • Various blade options for gently turning the product (optional)
  • Dispensers for dry and wet flavorings (optional)
  • Material: Stainless steel
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia
  • Total power, kW: 0,25
  • Voltage: 380-400V

We offer different capacity multi belt dryers and roasting ovens. For a free consultation, send us an email to sales@foodtechprocess.com 

We offer different capacity infrared dryers, for a free consultation, send us an email sales@foodtechprocess.com 

Infrared dryer IDU
Out of stock

We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.

For a quote or additional information, send us an email at sales@foodtechprocess.com

Cutter for french fries with an automatic hopper. Approx. 25 kg of French fries 12mm per minute. Cutting blocks are ordered separately.

For more information, send us an email to sales@foodtechprocess.com

Rotary molding machine for confectionery products: candies from paste-like masses, crushed fruit masses, protein candies and bars. Specially designed for molding candies from food masses.

For a price quote, please send us an email to sales@foodtechprocess.com 

  • Material: Stainless steel
  • Principle of operation: Continuous mode
  • Country of origin: Slovakia
  • Total power, kW: 1,5
  • Voltage: 380-400V

The knife mill is used for grinding products such as sugar, pepper, dry leaves and other products that are used during the production of spices and sauces.

  • Adjustable grinding size
  • Easy maintenance
  • Support structure
  • Large capacity hopper
  • Material: Stainless steel
  • Engine power, kW: 5,5
  • Principle of operation: Continuous mode
  • Voltage: 380-400V
  • Hopper volume, l: 30

The Y-shaped food mixer contains a double vessel with a 90° apex angle. This mixing system is designed for mixing, pre-mixing liquid, viscous, dry and bulk components to obtain homogeneous mixtures.

  • Special shape designed for fragile products that may break when exposed to centrifugal force
  • Effective mixing of products with different components to obtain a homogeneous structure quickly and with minimal energy consumption
  • Gentle mixing and tumbling due to complex random trajectories of product movement
  • Compact installation
  • Easy maintenance and high level of safety - safety bar with a position sensor
  • Material: Stainless steel
  • Engine power, kW: 0,75
  • Volume: 150l
Y mixer 150L
1 in stock

The universal boiler with an integrated homogenizer and a capacity of 1200 liters is designed for efficient mixing, heating, cooking and homogenizing of products for food, pharmaceutical and cosmetic industries such as jams, marmalades, syrups, fruit juices, nectars, beers, creams, ointments, soaps and many others.

The laboratory vacuum cutter mixer is designed for uniform grinding, emulsifying and mixing of food, cosmetic and pharmaceutical products, chemical mixtures with the addition of oil, dyes, concentrates or liquid flavors.

Croquettes production line for making and batter breading croquettes, preparing them for frying. Croquettes from 15 to 55 grams. Produces up to 12,000 pieces/hour. We also offer a range of fryers.

Price depends on your production capacity. For more information, please contact our sales department at sales@foodtechprocess.com

The NDM + drum mixer is designed for thorough mixing while retaining the structure of loose products without dead zones and with relatively low consumption and short mixing time. Made for mixing products such as coffee, tea, nutrients and supplements, baby food and many others.

For additional information, please contact us at sales@foodtechprocess.com

Drum Mixer NDM +1000
Out of stock

It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.

For a price quote or more information, send us a request at sales@foodtechprocess.com

Air cooling conveyor with MULTI AIR KNIFE is a system for  intensive removing excess water or oil and preliminary cooling. 

An air cooling conveyor is a system that uses moving belts and airflow to cool down products as they are transported along the conveyor line.

For additional information or a price quote, send us a request.

The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.

Drum Mixer NDM
1 in stock
Soft vs. cream cheeses
Soft cheeses, like brie and camembert, are characterized by their creamy texture and high moisture content, achieved through minimal processing using homogenizers.
Vacuum evaporation and concentration of liquid products
Vacuum evaporation of milk enhances its shelf life and preserves its nutritional content by gently removing water under reduced pressure, maintaining flavor and quality.
Crafting thermostable fillings for pastry snacks
Thermostable fillings play a crucial role in confectionery production, contributing not only to the expansion of your product range but also to the enhancement of quality standards.
Advantages of plow mixers within the food industry
The evolution of food processing technologies has significantly impacted the way we prepare our food. When it comes to mixing and homogenization devices, the plow mixer is particularly valued for...
Industrial dough mixers: the foundation for an ideal confectionery business
Making flawless baked goods and sweets is an art that demands both expertise and cutting-edge technology. Within the realm of confectionery and bakery production, a pivotal tool takes center stage...
View all blog posts