Adjustable conveyor with a hopper ACWH
A universal conveyor with a PVC belt with horizontal sections, a volumetric storage, adjustable in height and angle of inclination, which can easily be adapted to existing installations for lifting the product to a certain height. The conveyor has its own independent drive, the speed of which can be adjusted using an inverter (optional).
- Lightweight: the supporting structure of the conveyor is made out of aluminum profiles
- Hopper made out of food grade stainless steel
- Bearing frame on wheeled supports with position locks
- High sidewalls made out of stainless steel
- White PVC tape for transporting products with temperatures of up to 80 degrees
A transporting conveyor is a universal device for transporting products to predetermined heights. It can be used to transport large, small, light or heavy products. Usually it is a part of various technological lines and serves to transport products within the line between the installations. The conveyor ensures fast and efficient supply of raw materials for further processing.
The conveyor belt can be used for products such as:
|
|
|
Advantages:
- Lightweight and flexible design
- Conveyor height adjustment: 540-840 mm
- Change the tilt angle up to 20 degrees
- Convenient side handles
- Versatility of use
- Food belt with horizontal sections
- Fast cleaning and maintenance
- Easy installation and setup
- A receiving volumetric hopper installed at an angle of 40 degrees
Basic version
The conveyor includes a lightweight structure made out of aluminum profiles, a PVC food belt with horizontal sections with a drive, a spacious hopper and some stainless steel sidewalls.
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
- Volume: 50l/
The incline screw conveyor is used for transporting a wide range of bulk, powdery, fine-grained, and dusty products in food, chemical, construction, or agro-industries.
For more information, please, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Engine power, kW: 0,75 1,1/ 1,5 / 2,2
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product and size of the conveyor.
For more information, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: EU
The screw elevator is intended for transporting grape marc / bagasse. It also suitable for processing olives. This type of an elevator is great for food production facilities focusing on fruit processing as well as wine and olive oil production. The machine is made in two models with 3000 and 4000 mm length.Â
For more information, send us an email to sales@foodtechprocess.com
The conveyor for transferring empty as well as filled bottles and jars. Widely used within packaging lines for various liquids.
For a price quote or a free consultation, send us an email at sales@foodtechprocess.com
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
- Country of origin: EU
The screw conveyor with heating is a device designed for the transportation of material using a screw mechanism, while heat is applied to the product to facilitate easier transfer. This type of conveyor is often used to simplify the transfer of various bulk materials.
For more information, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
For a price quote or more information, send us a request at sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product as well as size of the conveyor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
The conveyor is made out of strong and highly-resistant stainless steel. It is also additionally reinforced for reliability during operation.
For additional information, please contact us at sales@foodtechprocess.com
Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product and size of the conveyor.
For more information, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Engine power, kW: 0,25
- Weight: 100
The sorting and transporting table or conveyor is suitable for manually sorting and delivering products to the next processing stage.
For more information about this product, email us at sales@foodtechprocess.comÂ
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 530 mm
The inspection conveyor is designed for inspection and manual removal of unsuitable pieces of root vegetables, fruits and berries.Â
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. The price depends on the product as well as the size of the conveyor.
For more information, send us an email at sales@foodtechprocess.com
- Material: Stainless steel
- Engine power, kW: 0,25
- Working Area Width: 300 mm
- Voltage: 380-400V
An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.
For a price quote or a free consultation, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The bucket elevator is designed for transporting loose bulk materials, such as grain and seeds in a vertical position. It's an ideal solution for transporting various products for the baking industry as well as animal feed and other granular productions.
For more information, send us an email at sales@foodtechprocess.com
- Principle of operation: Continuous mode
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
For additional information, please contact us at sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
- Voltage: 380-400V