Air cooling conveyor CAC W 500/1500
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
CAC cooling conveyors effectively reduce product temperature (in most cases in seconds) to stop product's cooking. The product is cooled to a temperature suitable for packaging. It is intended for pre-cooling after cooking or frying vegetables and fruits, meat, fish and seafood and other products coated breadcrumbs or without.
Suitable products:
- Nuggets
- Cookies and chips
- Meat
- Blanched dried fruit
- And other products
The design of the cooling conveyors ensures optimum air distribution across the conveyor belt. A high performance industrial fan with power control is located at the bottom of the conveyor. Using the frequency converter, it is possible to regulate the speed of the belt and thereby influence the cooling time.
The design of the cooling conveyor is constructed to make maintenance and inspection as simple as possible. High efficiency minimizes energy costs. The conveyor can be easily integrated into any production line. The CAC cooling conveyor is made of high quality AISI304 / AISI316L stainless steel food grade PVC and stainless steel belt.
In order to remove excess oil, water, small particles and starch, it is recommended that the air conveyor be filled with an air knife section.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
- Voltage: 380-400V
You might also like
The inspection conveyor is designed for inspection and manual removal of unsuitable pieces of root vegetables, fruits and berries.
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
Air cooling conveyor with MULTI AIR KNIFE is a system for intensive removing excess water or oil and preliminary cooling.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product as well as size of the conveyor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
Washing tank with wheels with conveyor belt for fruits and vegetables.
- Material: Stainless steel
- Engine power, kW: 2,4/
- Principle of operation: Continuous mode
- Country of origin: EU
- Working Area Width: 330 mm
- Voltage: 380-400V
The atmospheric tank with an inclined design is used for mixing, stirring, and dissolving various products. By supplying a thermal carrier to the unit’s jacket (duplicator) from an external source, thermal processing such as heating or cooling can occur (i.e. heating or cooling from an external coolant source with an inlet pressure of up to 0.5 bar). These units are widely utilized in the food and cosmetic industries.
- Inclined design: 50% more efficient mixing
- Due to the inclination angle of the working tank, rapid and complete (100%) emptying is achieved.
- Efficient heat transfer through the heating/cooling jacket
- No dead zones during mixing!
- Modular system with a wide range of additional options
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of equipment: Individual machine
- Country of origin: Slovakia
- Working volume: 100l/ 200l/ 300l/ 450l/ 600l/ 900l
The cooling tank is designed for storing milk and other beverages.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: EU
The IBC container insulation cover is designed for use in ice water stations with IBC containers to maintain the cold coolant at a set temperature.
- Allows you to reduce energy costs of the refrigeration machine - chiller
- Protects from short-term fluctuations in ambient temperature, reflects sunlight (up to 97%)
- The cover is easy to install, with valve holes are installed with hook-and-loop fasteners (Velcro)
- Type of equipment: Optional equipment
Heating: electric and steam - combination
- Material: Stainless steel
- Principle of operation: Continuous mode
Lowering the temperature and humidity protects the product even without chemical treatment. The device is also used for continuous air cooling after heat treatment.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
- Volume: 120 l/ 300l
- Voltage: 380-400V
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.
Fixed cooling unit wit different capacities from 67 kW up to 226 kW. Unit are solid and ensure long-life base operation.
- Country of origin: EU
This multi layer belt dryer with integrated cooling system works as a dryer and cooler in one installation.
- Material: Stainless steel
- Principle of operation: Continuous mode
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum heating temperature of 60 °C.
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of equipment: Individual machine
- Country of origin: Slovakia
- Geometric volume: 100 l
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C.
For more information, send us an email to sales@normit.com
- Volume: 18 l/ 30l
- Voltage: 220-230V
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
The Milk Cooler has a simple design, which allows for easy and safe operation. it meets the requirements of all dairy production facilities.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 200l/ 300l
- Voltage: 380-400V
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
- Principle of operation: Continuous mode
- Country of origin: EU
An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V