Centrifugal pump HV 25/12.5

Electric continuous flow heaters in different designs and performance parameters.

The lobe rotary pumps are designed for pumping both liquid and thick products. We offer lobe pumps in 2 versions with 1.5 kW is a standard for milk, cream and similar products, and 3 kW is for dense low-flow products such as honey, pastes, cottage cheese etc. 

The pump provides a delicate straight-streaming pumping of a wide range of liquids with or without solid fragments with viscosity up to 150 Pa.s. 

Elliptical rotor pump (three power range models available).

We offer different types of pumps for different applications.

The homogenizer is designed to homogenize, mix and disintegrate / grind different fluids and components into small particles.

The circulation pump for the heating system is a mandatory component for the operation of a flow-through heating system used for heating the water serving as a heat transfer medium inside the duplicator of industrial cooking boilers, mixers, reactors, and vacuum evaporators in food production. It is selected based on the required parameters of the heating system (volume). Our specialists will be happy to assist you in selecting the appropriate pump if you provide the technical specification requirements. This pump is an essential additional component for the flow-through water heater up to 110°C.

• It can be used to circulate water at temperatures up to 110° C
• High efficiency with low power consumption
• Also suitable for central heating systems, heated floors and even for solar systems
• Small connections allow the use of flexible pipes with a smaller diameter

The stainless steel impeller milk pump is designed for hygienic and efficient transfer and circulation of milk and other low-viscosity liquid dairy products.

• Suitable for milk and other liquid dairy products
• Two motor options: 0.55 kW and 1.1 kW
• Pumping capacity of approximately 14 m³/h and 20 m³/h respectively
• 40 mm inlet for both versions

We offer different types of pumps for different processes.

Monoblock pumps with an integrated frequency converter. We offer many different types of pumps, if you need any advice on which pump to choose, feel free to send us the request. 

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.

The portable vertical pump is designed for pumping fluent or viscous liquids in the range from 1-2300 m2/s at a temperature of around 25°C. The pump cannot be used in potentially explosive atmospheres.

The fruit mash pump is designed for efficiently transporting mashed fruits from a crusher to a press for extracting juice.

Twin-screw extruder is designed for effective extruding, homogenization, pumping over of plastic masses (butter, margarine, honey, curd products, confectionery mixtures), and forming it into bars and rolls.

Product consistency: The extruder is designed for firm but plastic product masses, typically at a temperature of around 12 °C. Suitable products include butter, margarine, and other similar plastic food masses.

One of advantages of this glandless pump is very high durability and efficiency in operation in very demanding conditions. We offer glandless pump with different power variations.

Stainless steel low-speed rotary pumps with a flexible impeller; We offer two versions. On base or trolley.