Electric gear pump RPNX
We offer different types of pumps for different processes.
The electric gear pumps have been developed for the transfer of all non-aggressive every day viscous liquids. 
The liquids must be clean without suspended particles. These pumps are suitable for the transfer of water, wine, olive-oil, milk or diesel and synthetic or mineral oil.
The electric gear pumps are capable of sucking liquids up to a maximum drop difference of 2 meters without the need of filling. If the drop difference is greater, a non-return valve can be positioned at the end of the suction pipe which must then be filled as far as the pump. To increase the suction capacity of the pump, pour approximately 10 ml of the liquid to be transferred into the pump. The pump should in any case be positioned close to the container of the liquid to be transferred. The pump could be damaged if it runs dry for more than 10 seconds. Never operate the pump without the hose connectors. Always connect the filter supplied with the suction pipe before starting the pump.
All electric gear pump models can operate in a continuous manner at a pressure of 2 bar (0.2 MPa).
The 230V powered models are equipped with a commutator to reverse the rotation of the motor, which allows the free selection of the pumping direction. The battery powered models have a predetermined rotation direction that is indicated by an arrow on the pump casing.
- Engine power, kW: 0,37
- Dimensions, mm: 230x190x120
You might also like
One of advantages of this glandless pump is very high durability and efficiency in operation in very demanding conditions. We offer glandless pump with different power variations.
- Principle of operation: Continuous mode
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.
- Principle of operation: Continuous mode
Stainless steel low-speed rotary pumps with a flexible impeller; We offer two versions. On base or trolley.
- Principle of operation: Continuous mode
Centrifugal impeller pumps are ideal for various industrial applications such as food processing, manufacturing, washing and surface treatment of metal pieces, boxes, containers, glass jars and vessels. These pumps are also suitable for dishwashers, bottle washing lines, painting processes, and pumping liquids into various chambers.
- Principle of operation: Continuous mode
We offer a wide variety of different pumps for all kinds of liquids, semi-liquid products in various applications.
- Principle of operation: Continuous mode
The screw pump is used for transferring "un-pumpable" products. A great choice for those who work with hard to move liquids and need to move them as quickly as possible.
- Material: Stainless steel
- Voltage: 380-400V
The lobe rotary pumps are designed for pumping both liquid and thick products. We offer lobe pumps in 2 versions with 1.5 kW is a standard for milk, cream and similar products, and 3 kW is for dense low-flow products such as honey, pastes, cottage cheese etc.Â
- Engine power, kW: 1,5 / 3
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.
- Principle of operation: Continuous mode
One of advantages of this glandless pump is very high durability and efficiency in operation in very demanding conditions. We offer glandless pump with different power variations.
- Principle of operation: Continuous mode
Stainless steel low-speed rotary pumps with a flexible impeller; We offer two versions. On base or trolley.
- Principle of operation: Continuous mode
The high-performance screw pump is used for pumping both thick and viscous food products, as well as various masses containing pieces or solid inclusions such as in the cosmetics, cosmetology, and other industries.
- High performance
- All parts in contact with the product are made out of AISI304
- Does not damage products containing solid pieces
- Additional options: by-pass
- Material: Stainless steel
- Engine power, kW: 1,1/ 1,5 / 3
- Principle of operation: Continuous mode
Centrifugal pump designed for pumping low viscosity food and aggressive liquids.
- Principle of operation: Continuous mode
Designed for pumping hot thermal oil in frying circulation and filtration systems, for oil loading and unloading, in "hot" continuous oil filtration systems with a maximum temperature of up to 200 degrees.
- Material: Stainless steel
- Engine power, kW: 0,55
- Country of origin: Slovakia
We offer a wide variety of different pumps for all kinds of liquids, semi-liquid products in various applications.
- Principle of operation: Continuous mode
Electric continuous flow heaters in different designs and performance parameters.
- Heating: Electricity
- Material: Stainless steel
- Country of origin: Slovakia
- Type of pump: sealless pump
Monoblock pumps with an integrated frequency converter. We offer many different types of pumps, if you need any advice on which pump to choose, feel free to send us the request.Â
- Principle of operation: Continuous mode
The pump provides a delicate straight-streaming pumping of a wide range of liquids with or without solid fragments with viscosity up to 150 Pa.s.Â
- Material: Stainless steel
- Engine power, kW: 1,1
- Principle of operation: Continuous mode
Vane pumps are used for pumping high viscosity products such as syrups, honey, mayonnaise, sauces, cream and many other products.
- Material: Stainless steel
- Engine power, kW: 2,2
- Type of pump: rotary vane
The single-stage vacuum pumps are versatile, offering a wide range of applications when it comes to transporting liquids due to their simplicity, reliability, and robustness. The device operates with minimal vibrations, and its noise levels do not exceed the prescribed standards. Additionally, it ensures oil-free operation.
The homogenizer is designed to homogenize, mix and disintegrate / grind different fluids and components into small particles.
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The circulation pump for the heating system is a mandatory component for the operation of a flow-through heating system used for heating the water serving as a heat transfer medium inside the duplicator of industrial cooking boilers, mixers, reactors, and vacuum evaporators in food production. It is selected based on the required parameters of the heating system (volume). Our specialists will be happy to assist you in selecting the appropriate pump if you provide the technical specification requirements. This pump is an essential additional component for the flow-through water heater up to 110°C.
- It can be used to circulate water at temperatures up to 110° C
- High efficiency with low power consumption
- Also suitable for central heating systems, heated floors and even for solar systems
- Small connections allow the use of flexible pipes with a smaller diameter
- Type of the equipment: Optional equipment