Washer and Filler for Kegs SV 10, SV 30
Keg washing and filling machine used for washing and filling kegs and barrels for beer, cider, wine and other beverages.
A manual filling machine made out of stainless steel (AISI 304) designed to clean and fill kegs and barrels with volumes of 15 to 50 liters.
The equipment features a sanitizing solution tank, heating spirals, a pump, and a control panel for both pump and temperature control.
Operating capacity:
- from 7 to 10 barrels per hour
- from 30 to 50 barrels per hour (washing + filling / washing)
The machine works in the following steps:
- Emptying beer
- Barrel depressurization
- Rinsing the barrel with cold water
- Flushing the barrel with a disinfectant solution
- Flushing the barrel with cold water
- Sterilization inside the barrel using steam (requires an external steam source)
- Filling the CO2 container
- Filling the barrel with beer. All cycles (1-8) are handled manually
- Material: Stainless steel
- Engine power, kW: 0,75
- Operation mode: Manual
- Voltage: 220-230V 380-400V
You might also like
The cylindrical conical tank is a designed for the fermentation of the beer and other beverages.Â
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
Open fermentation vat / vessel is designed for fermentation of beer and other liquids.Â
- Material: Stainless steel
- Principle of operation: Batch mode
The hot water tank is designed to catch the preheated water from the first stage of the wort cooling and then heat it to 80 ° C, the pump bowl is a part of the vessel.Â
- Material: Stainless steel
- Type of the equipment: Individual machine
- Volume: 2000
This head capping machine has a magnetic clutch, ribbed spindle. It is semi-automatic and closes bottles or jars with PFP aluminum caps, twist off caps or plastic screws. The price depends on the cap, product you are filling, and capacity.
Price depends on the lid, the product you are filling, and the container.
- Productivity: 400-700 psc/h
- Material: Stainless steel
- Principle of operation: Continuous mode
- Voltage: 220-230V
A range of pneumatic vertical filling machines for dosing liquids with viscosity is similar to water.
- Type of the equipment: Individual machine
Semi-automatic dosing machine, designed for filling and capping different spouted pouches with various liquids.
- Material: Stainless steel
- Operation mode: Semi-automatic
The Bag in Box Filler is designed for filling hot and cold liquids into Bags in Boxes and for Stand Up Pouch packaging.
- The machine fills the bags up automatically.
- Material: Stainless steel
- Principle of operation: Continuous mode
Vibrating conveyors suitable for arranging the product before further processing.
- Working Area Width: 720 mm
- Voltage: 380-400V
We sell many different filling machines for different products.
This particular model is not available at this moment.
- Material: Stainless steel
- Country of origin: EU
Normit AP tensometric filling machine is a weight-based system for filling honey into barrels.Â
- Material: Stainless steel
- Country of origin: Slovakia
Dosing tank for filling and measuring oil designed as an oil reservoir with the ability to adjust the required volume.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 100l
- Working volume: 80 l
VBF is a fast, robust, and versatile vacuum bottle filler. This is the filling machine you are looking for if you desire to increase the production volume of your homemade products, and professionalize the bottling of wine, oil, beer, fruit juices, or other products.
- Operation mode: Semi-automatic
- Principle of operation: Continuous mode
Designed for accurate feeding and packaging of liquids under pressure.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 80l/
The piston-operated pneumatic liquid dispenser is a semi-automatic filler used for dispensing various low viscosity liquids ranging from 10 to 100 ml in volume.
- Compact tabletop installation
- Simple control with two operating modes: manual and semi-automatic
- Suitable for liquid products with low viscosity (from water to oil)
- Optional compressed air compressor available
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Continuous mode
- Voltage: 220-230V
We offer different types of meat stuffing machine for domestic and commercial use.
- Weight: 10 / 12
- Dimensions, mm: 630 x220x230 / 820x220/230
The honey dosing machine is a precise filling machine with a gear pump, it is easy to use and is suitable for filling honey as well as a large number of other different liquids - ranging from thinner ones such as drinking yogurt, to high-viscosity products such as mustard.
- Fast operation
- Easy to use
- Easy to clean
- Accuracy
- Compact design
- Productivity: 200 l
Filling machine is designed for pumping and filling high viscosity liquids, such as jams, confiture, sauces, dressings, syrups, and like products.
- Productivity: 200–600 bottles per hour
- Material: Stainless steel
- Principle of operation: Continuous mode
TEPF is a pneumatic dispenser for dosing several kind of products. The machine allows the filling of food, chemical, cosmetic, or pharmaceutical products into diverse type of bottles and jars.
Price depends on the product used.
- Material: Stainless steel
- Operation mode: Automatic Manual
- Type of the equipment: Individual machine
Hydraulic sausage filling machine is the ideal equipment to fill sausage of various specifications and is suitable for filling in different kinds of casings.
We offer different meat processing machines.
- Material: Stainless steel
- Engine power, kW: 0,37
- Weight: 92 / 135
- Voltage: 380-400V