Milk Pump – Impeller Pump MAK
The stainless steel impeller milk pump is designed for hygienic and efficient transfer and circulation of milk and other low-viscosity liquid dairy products.
- Suitable for milk and other liquid dairy products
- Two motor options: 0.55 kW and 1.1 kW
- Pumping capacity of approximately 14 m³/h and 20 m³/h respectively
- 40 mm inlet for both versions
The Mak Milk Pump is a compact impeller pump designed for transferring milk and other liquid dairy products between processing vessels, storage tanks, pasteurizers, and other processing equipment.
The pump is suitable for small and medium-scale dairy processing operations requiring reliable product transfer and circulation. Two motor configurations of 0,55 kW and 1,1 kW are available, providing different pumping capacities depending on the production requirements.
The pump can be used as an independent liquid transfer unit or integrated into a larger dairy processing system, including milk pasteurization, cheese production, yogurt processing, homogenization and other applications requiring controlled movement of liquid products.
The milk pump can be used for:
- transferring milk between storage and processing tanks
- pumping milk to and from pasteurizers
- circulation of milk during thermal processing
- transferring cream and other liquid dairy products
- feeding milk into cheese and yogurt processing equipment
- transferring liquid products between processing stages
- connecting individual dairy processing machines into a continuous working circuit
The pump is particularly useful if gravity discharge is insufficient or if controlled product circulation is required between two pieces of equipment.
Milk pump configurations:
The FoodTechProcess Milk Pump is available in two motor versions:
- The 0.55 kW milk pump is designed for pumping capacities of approximately 14 m³/h. It is suitable for smaller dairy processing installations and applications where moderate transfer capacity is required.
- The 1.1 kW milk pump provides a higher pumping capacity of approximately 20 m³/h and is intended for applications requiring greater product flow between processing vessels or through a circulation circuit.
Both versions have a 40 mm inlet. The 0.55 kW version is equipped with a 32 mm outlet.
Advantages
- Suitable for milk and other low-viscosity liquid dairy products
- Two motor power options for different processing capacities
- Compact design for easy integration into dairy processing lines
- Suitable for liquid product transfer and circulation
- Hygienic stainless steel construction suitable for food-processing applications
- Can be used between cooling tanks, pasteurizers, and other dairy processing equipment
- Simple integration into existing or newly designed processing systems
Use in dairy processing lines
The milk pump can serve as a connecting element between several stages of dairy production. For example, milk can be transferred from a storage or receiving tank to a milk pasteurizer, circulated through a heating or cooling system, and then transferred to another processing vessel. The pump can also be used to move milk between processing equipment during cheese or yogurt production.
FoodTechProcess offers different types of dairy processing equipment that can be used in combination with the milk pump, including milk pasteurizers, cheese vats, yogurt processing equipment, homogenizers, multifunctional dairy vats, and large milk processing systems.
For larger pasteurization systems, the same principle of forced circulation is already used in milk-processing equipment, where pumps are used to move the product through an external heat-exchange circuit. The pump can therefore be supplied as part of an individual processing installation or incorporated into a more extensive dairy production line according to the required process.
The basic version milk pump consists of:
- stainless steel pump housing
- impeller
- electric drive motor
- 40 mm product inlet
- product outlet according to the selected pump version
The 0.55 kW and 1.1 kW configurations are selected according to the required product flow and the layout of the processing system.
Technical specifications
| Parameter | 0.55 kW version | 1.1 kW version |
| Motor power | 0.55 kW | 1.1 kW |
| Approx. pumping capacity | 14 m³/h | 20 m³/h |
| Inlet diameter | 40 mm | 40 mm |
| Outlet diameter | 32 mm | 40 mm |
| Pump type | Impeller pump | Impeller pump |
| Application | Milk & liquid dairy products | Milk & liquid dairy products |
- Material: Stainless steel
- Engine power, kW: 0,55/ 1,1
- Principle of operation: Continuous mode
- Voltage: 230 V/ 380-400V
You might also like
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.
- Principle of operation: Continuous mode
Monoblock pumps with an integrated frequency converter. We offer many different types of pumps, if you need any advice on which pump to choose, feel free to send us the request.
- Principle of operation: Continuous mode
This pump is a monoblock single-stage liquid ring vacuum pump suitable for low, medium, and high vacuum applications. It is an economical pump with exceptional performance and reliability.
- Productivity: 52 m3/h
- Principle of operation: Continuous mode
The lobe rotary pumps are designed for pumping both liquid and thick products. We offer lobe pumps in 2 versions with 1.5 kW is a standard for milk, cream and similar products, and 3 kW is for dense low-flow products such as honey, pastes, cottage cheese etc.
- Engine power, kW: 1,5 / 3
Elliptical rotor pump (three power range models available).
- Material: Stainless steel
- Engine power, kW: 1,8/ 4/ 5,5
- Principle of operation: Continuous mode
Vane pumps are used for pumping high viscosity products such as syrups, honey, mayonnaise, sauces, cream and many other products.
- Material: Stainless steel
- Engine power, kW: 2,2
- Type of pump: rotary vane
Designed for pumping hot thermal oil in frying circulation and filtration systems, for oil loading and unloading, in "hot" continuous oil filtration systems with a maximum temperature of up to 200 degrees.
- Material: Stainless steel
- Engine power, kW: 0,55
- Country of origin: Slovakia
The portable vertical pump is designed for pumping fluent or viscous liquids in the range from 1-2300 m2/s at a temperature of around 25°C. The pump cannot be used in potentially explosive atmospheres.
- Material: Stainless steel
- Engine power, kW: 0,25
- Voltage: 380-400V
Electric continuous flow heaters in different designs and performance parameters.
- Heating: Electric
- Material: Stainless steel
- Country of origin: Slovakia
- Type of pump: sealless pump
The circulation pump for the heating system is a mandatory component for the operation of a flow-through heating system used for heating the water serving as a heat transfer medium inside the duplicator of industrial cooking boilers, mixers, reactors, and vacuum evaporators in food production. It is selected based on the required parameters of the heating system (volume). Our specialists will be happy to assist you in selecting the appropriate pump if you provide the technical specification requirements. This pump is an essential additional component for the flow-through water heater up to 110°C.
- It can be used to circulate water at temperatures up to 110° C
- High efficiency with low power consumption
- Also suitable for central heating systems, heated floors and even for solar systems
- Small connections allow the use of flexible pipes with a smaller diameter
- Type of the equipment: Optional equipment
Stainless steel low-speed rotary pumps with a flexible impeller; We offer two versions. On base or trolley.
- Principle of operation: Continuous mode
Twin-screw extruder is designed for effective extruding, homogenization, pumping over of plastic masses (butter, margarine, honey, curd products, confectionery mixtures), and forming it into bars and rolls.
Product consistency: The extruder is designed for firm but plastic product masses, typically at a temperature of around 12 °C. Suitable products include butter, margarine, and other similar plastic food masses.
- Productivity: 400 kg/h
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Weight: 115 kg
We offer a wide variety of different pumps for all kinds of liquids, semi-liquid products in various applications.
- Principle of operation: Continuous mode
The fruit mash pump is designed for efficiently transporting mashed fruits from a crusher to a press for extracting juice.
- Productivity: 6000 kg/h
- Material: Stainless steel
- Engine power, kW: 1,85
- Voltage: 380-400V
Centrifugal pump designed for pumping low viscosity food and aggressive liquids.
- Principle of operation: Continuous mode
Centrifugal impeller pumps are ideal for various industrial applications such as food processing, manufacturing, washing and surface treatment of metal pieces, boxes, containers, glass jars and vessels. These pumps are also suitable for dishwashers, bottle washing lines, painting processes, and pumping liquids into various chambers.
- Principle of operation: Continuous mode
The homogenizer is designed to homogenize, mix and disintegrate / grind different fluids and components into small particles.
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The pump provides a delicate straight-streaming pumping of a wide range of liquids with or without solid fragments with viscosity up to 150 Pa.s.
- Material: Stainless steel
- Engine power, kW: 1,1
- Principle of operation: Continuous mode
We offer different types of pumps for different applications.
- Principle of operation: Continuous mode