Water Chiller NWT PLUS
The NWT PLUS chillers have a compact design. They take little space and are very easy to install and to start. The units are mobile on wheels. We offer different capacities.
Water chillers and chilling systems
The NWT PLUS chiller is equipped with a hermetically closed motor compressor and with a complete cooling water circuit containing stainless steel water tank and centrifugal pump. Also, they contain an additional heater which is integrated inside a stainless steel water-tank.
The NWT PLUS series is equipped with a micro-channel condenser which enables even more efficient heat-transfer. The ventilator is mounted on the top part of the unit, so the unit can be placed near a wall with any side facing it. The side-boards are very easy to remove, allowing easy access for maintenance.
The NWT PLUS is available in three sizes and capacities from 6,4 – 12,7 kW. It is the optimal solution for small to medium-size wineries, breweries, cideries, etc. that mainly wish to cool but that also need to heat their products from time to time.Â
CHARACTERISTICS OF A WATER CHILLER
- Cooling water temperature range from -10°C to +40°C (from 14°F to 104°F)
- Ambient temperature range from +10°C to +42°C (from 50°F to 108°F)
- Unit mobile on wheels
- Highly efficient micro-channel condenser
Where to use water chillers
- Cooling and heating of must, wine, beer and other liquids such as cider, carbonated soft-drinks, distillates etc.
- Fermentation temperature control
- Tartaric stabilisation of wines and biological reduction of acids
- Cool storage of wine until bottling
- Maturation of young beer
- Cooling and stabilisation of distillates
- Room temperating of halls and storage rooms - only possible with additional fan coils
TECHNICAL DETAILS OF A WATER CHILLER
- Available in three models: NWT PLUS 50 / NWT PLUS 90 / NWT PLUS 110
- Cooling capacity: 6,4 - 12,7 kW (8,58 - 17,03 HP)
- Refrigerant: R410A
- Electric connection: 400V/3Ph/50Hz (other options by inquiry)
- Water inlet / outlet connection: 3/4" (female)
- Heating: integrated
- Voltage: 380-400V
You might also like
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C.
For more information, send us an email to sales@normit.comÂ
- Volume: 18 l/ 30l
- Voltage: 220-230V
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
- Volume: 120 l/ 300l
- Voltage: 380-400V
Air cooling conveyor with MULTI AIR KNIFE is a system for intensive removing excess water or oil and preliminary cooling.Â
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
Fixed cooling unit wit different capacities from 67 kW up to 226 kW. Unit are solid and ensure long-life base operation.
- Country of origin: EU
This multi layer belt dryer with integrated cooling system works as a dryer and cooler in one installation.
- Material: Stainless steel
- Principle of operation: Continuous mode
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
- Voltage: 380-400V
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum heating temperature of 60 °C.
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: Slovakia
- Geometric volume: 100 l
The new line of TCAEY compact cooling units is suitable as a cooling source for industrial applications. It's a reliable chilling device for cooling different kinds of liquids.Â
- Principle of operation: Continuous mode
- Country of origin: EU
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C.
For more information, send us an email to sales@normit.comÂ
- Volume: 18 l/ 30l
- Voltage: 220-230V
Cooling tunnel with a length of 15.2 meters. The standard design consists of 13 sections with removable top. For more information, send us a request.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
The price is set for the basic version of the installation without additional equipment.
The vacuum homogenizer is designed for a wide range of processes such as for the production of mayonnaise, ketchup, various sauces, confectionery pastes and fillings, liquid or paste like products with a homogeneous structure. It is also suitable for the production of various creams, gels, shampoos and other products in the cosmetic industry.
- Built-in Ultra Shear bottom homogenizer
- Mixing device with movable scrapers
- Tilting version for easy unloading
- Wide range of applications
- Entirely made of food grade stainless steel AISI304/ AISI316 - option
- Compact design
- Lots of additional options to choose from
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 20l/ 50l
- Total power, kW: 2,3/ 2,4
- Voltage: 220-230V
- Max vacuum: -0,8 Bar
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
The AS series chillers belong to the top professional cooling devices for quick beverages' chilling in restaurants, cafes, catering industry facilities, and pubs. The chiller is suitable for cooling water, spark or soft drinks, beer, wine, strong alcohol drinks, and others.
- Principle of operation: Continuous mode
- Country of origin: EU
- Cooling performance l/h: 160 l/h / 200 l/h
The vacuum bread cooler is well-suited for application in small bakeries or as a laboratory unit in industrial enterprises. This enables the post-baking of bread under vacuum conditions, influencing both its shape and structure.
- Built-in deep vacuum system
- Built-in vapor removal and condensation system
- Built-in refrigeration system
- The chamber is designed for 3 gastro containers size GN 1/1, or pallets: 400x600/530x325 mm
- Compact and mobile installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 130l
- Voltage: 380-400V
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
- Principle of operation: Continuous mode
- Country of origin: EU
The cooling tank is designed for storing milk and other beverages.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: EU
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
- Volume: 120 l/ 300l
- Voltage: 380-400V