Storage container for oil and water

The price is set for the basic version of the vacuum evaporation unit with basic controls (mixer motor switch) and without additional options. The control unit is customized based on individual customer requirements. The pump is also selected separately depending on the product.

A compact vacuum evaporation unit that allows you to concentrate solutions, mixtures, and various products by evaporating the solvent. A modular version based on the basic version of the 110/100 vacuum reactor.

• Gravity mixing - 25% more efficient
• Reinforced agitator design with no blind spots
• Bottom ball valve with no dead zones
• Condensation and secondary vapor removal system
• Easy to disassemble mixing device
• Large heat exchange area
• Ability to measure and monitor condensate volume (optional)

The vacuum batch dryer is suitable for gentle and high-quality dehydration to obtain a product with low solvent/moisture content.

• Special stirrer for uniform heat distribution and mixing
• Drying of heat-sensitive wet solids
• Suitable for the separation of suspensions and drying extracts
• Low processing temperature due to a deep vacuum

Open fermentation vat / vessel is designed for fermentation of beer and other liquids. 

Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.

The atmospheric tank with an inclined design is used for mixing, stirring, and dissolving various products. By supplying a thermal carrier to the unit’s jacket (duplicator) from an external source, thermal processing such as heating or cooling can occur (i.e. heating or cooling from an external coolant source with an inlet pressure of up to 0.5 bar). These units are widely utilized in the food and cosmetic industries.

• Inclined design: 50% more efficient mixing
• Due to the inclination angle of the working tank, rapid and complete (100%) emptying is achieved.
• Efficient heat transfer through the heating/cooling jacket
• No dead zones during mixing!
• Modular system with a wide range of additional options

Tilting bratt pans with mixer are frying the product with continuous stirring. Designed for catering industry, school kitchens, restaurants and food industry. Variants of heating systems: direct electric and direct gas. Capacity: 150, 200 or 300l.

For a price quote, send us a request.

It is ideal for cooking jams, marmalades, syrups, sauces, creams and other products.

Price depends on the chosen option. 

The vacuum crystallizer-cooler is specifically designed for sweetened condensed milk. Crystallization with cooling is one of the most important stages in the production of condensed milk according to GOST and is necessary before dosing and packing the finished product.

• After crystallization, condensed milk has a delicate structure with small crystals
• Condensed milk has a homogeneous shape and attractive consumer properties
• The shelf life of condensed milk is extended without changing the quality of the product

A vacuum distillation system is used for controlled separation of liquids based on the evaporation of the liquid and subsequent condensation of its vapors.

The kettle is designed for cooking qualitative jam, marmalade, confiture from different fruits, vegetables and berries. It's an ideal and affordable solution for cooking various products.

The price is set for the basic version of the reactor without additional options and the control panel

The vacuum vessel with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum cooking kettle, and a unit for the production of cream honey.

• Sloped Design - Gravity Mixing
• Bottom valve DN40 included in the basic version
• Small-volume duplicator - low costs for coolant heating/cooling
• Modular system: customization of the equipment and its functionalities by ordering additional options
• An easy to disassemble mixing device

A vacuum deaerator is extensively used in the food industry to remove gases from products that may retain some bubbles post-processing. Additionally, a flow deaerator is utilized to minimize foaming in products, ensuring a denser structure, especially prior to packaging. Vacuum deaerators play a crucial role in eliminating specific odors from the products, such as in the production of juices, purees, and herbal drinks. This process significantly contributes to enhancing the overall quality and taste of the final product.

• Enhances product quality, structure, and shape
• Prevents oxidation by removing gases
• Preserves organoleptic properties and extends the shelf life
• Suitable for thick and viscous products
• The flow principle allows for the installation of this equipment in existing production lines

A large stainless steel pot with a drain valve and a temperature sensor can be used on any cooking surface: electric, gas, induction.

• Large 6/4'' drain valve
• Multi-layer sandwich bottom
• Cooking pot wall thickness 1 mm
• Professional, high-temperature temperature sensor

A cooking kettle and a vacuum mixer for periodic deaeration of products such as mayonnaise, ketchup, various sauces, creams, gels and pastes. It is one of the modifications of a vacuum reactor and a vacuum evaporator. The presence of a vacuum system allows you to create a vacuum after the cooking process and perform vacuuming (deaeration) to remove air bubbles with potential contaminants and obtain a product with a denser structure. Thanks to vacuuming, the product has an extended shelf life, since pathogens and microbes contained within are removed together with the air.

• Inclined design with gravity mixing, which is 30% more efficient than usual
• 100% emptying of the product after processing due to the bottom valve
• Easy to disassemble removable mixing device
• Possibility of connecting it to a CIP station for cleaning and washing

The brewery boiler comprises a two-pot-shaped assembly, in which the integrated frame is a built-in lauter tun, a mash tank, a whirlpool, a laboratory sink and a control panel.