Tank with a mixer and a jacket for the thermal carrier

€0.00

The atmospheric tank with an inclined design is intended for mixing, stirring, and dissolving various products. By supplying a thermal carrier to the unit’s jacket from an external source, thermal processing such as heating or cooling can occur. These units are widely used in the food and cosmetic industries.

Inclined Design: 40% more efficient mixing
Due to the inclination angle of the working tank, rapid and complete (100%) emptying is achieved.
No dead zones during mixing!
Modular system with a wide range of options
Efficient heat transfer through the duplicator

Atmospheric mixers with a frame mixer and coolant jacket are suitable for use in the food, cosmetic, chemical, and many other industries, as they are capable of a wide range of processes, including:

cook	mix	dissolve	concentrate
cool	stir	pasteurize	boil down

Atmospheric tanks with a mixer and a heating/cooling jacket are suitable for the production of products such as:

shampoos	gels	ketchup, sauces
cream honey	soups	beverages
jams	salt solutions	marinades

And much more!

Advantages:

Hygienic design: No dead zones due to gravity mixing, where the product flows to the lowest point, from which it is raised by the mixer and incorporated back into the total mass. Gravity mixing is 40% more efficient than standard methods.
The inclined design also facilitates fast unloading while the mixing device is activated.
The unit can be produced with and accommodate various types of frame mixing devices.
The heating/cooling jacket allows for the use of steam or hot water for heating, and for cooling, cold water or glycol can be supplied into the jacket.
A professional stainless steel temperature sensor, certified for use in contact with food, is installed in the bottom of the working tank.
The internal surfaces are polished to RA ≤ 1.6 µm. Mirror-polished internal surfaces (for the pharmaceutical industry) can be ordered as an option.
Convenient maintenance due to the inclined design, even with large volume units.

Basic version:

The unit is equipped with a frame mixing device with a professional industrial three-phase gear motor as standard. The reactor has a two-layer duplicator with a heating/cooling jacket (up to 0.5 Bar), thermal insulation and an external decorative casing can be included as an option. In the basic version, the internal surface of the mixers is polished, the welds are cleaned and etched. Optionally, the internal surface of the mixer can be polished to Ra <0.4 μm. Hot water or steam can be used as a heat carrier. The mixer is equipped with a temperature sensor in the product.

Options: