Drum Mixer NDM +1000
The NDM + drum mixer is designed for thorough mixing while retaining the structure of loose products without dead zones and with relatively low consumption and short mixing time. Made for mixing products such as coffee, tea, nutrients and supplements, baby food and many others.
The NDM drum mixer is designed for thorough mixing while retaining the structure of loose matter without dead zones and relatively low consumption and short mixing time.
The product is placed in the drum through the handling opening, carefully and gently stirred by rotating the drum. Mixing takes place based on the fact that the product rotates in the drum and rises and falls at a certain angle along its circumference. The mixture is drawn through the same opening but the door is in the lower position.
The shaft which rotates the drum can coincide with the symmetry axis or diagonally, and the drum can take various forms depending on the purpose and nature of the product. Good mixing of the product ensures that the blades are placed inside the drum. The safety of operation is ensured by the SAFETY WALL. When the position of the barrier is changed, the position sensor is activated, which stops the mixer motor and the warning light - the safety barrier - illuminates. The drum mixer can be equipped with a heating, vacuum, vibration, weighing or dosing system.
Applications
- Combined feed
- Infant food

- Food concentrates and additives
- Nutrients for athletes
- Coffee, teas
- Pharmaceutical and chemical products
Benefits
- A homogenous mixture in a very short time
- Minimum power consumption
- Flexibility of mixing
- Intense mixing
- Homogeneous mixture
- Maintaining product properties
- Simple installation
- Quick and easy cleaning thanks to the drum opening
- Low maintenance requirements
- Process for all product types
- All-stainless version
- Also suitable for sensitive product structure
- No friction heat
- Possibility to add a dosing system (injection of aromatics)
- In the case of clusters, it is possible to install the mixer for bending
- Simple operation
- Low noise at work
- Programming the mixer
- The severity of the mixing chamber
- Possibility to add liquid products when mixed

ADDITIONAL EQUIPMENT
- Set of mobile containers for loading, unloading and transport of mixtures
- Devices for weighing and dispensing products
- Screw mixer for batch unloading of the finished mixture
- El. control panel with touch screen
- PLC control
- Duplicator for heating / cooling
- Making a vacuum timer
- Light and sound signaling
- Vibration system
- Shaft in the form of a tube for the delivery of various gases, additive fluids
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 1000l
You might also like
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.
Archived model - out of production
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 150l/ 200l/ 500l
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
- Engine power, kW: 0,37/ 0,55/ 1,1
- Volume: 20l/ 75/ 100l
Suitable for mixing a small amount of dough or meat as well as other thick mixtures.
- Material: Stainless steel
- Engine power, kW: 0,55
- Principle of operation: Batch mode
- Volume: 10l/ 20l
Stainlees steel free standing mixer for meat and dough.
- Material: Stainless steel
- Engine power, kW: 0,75 1,1
- Principle of operation: Batch mode
- Volume: 40 60l/ 80l/ 120l
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum vessel with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum cooking kettle, and a unit for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Shaker mixer SMU6 is designed for mixing the contents of packaged products that are in foil or other protective packaging. The device is used in the food, pharmaceutical, chemical, construction and cosmetic industries, where it is necessary to thoroughly mix the contents without damaging the packaging.
- No need to remove the product from the packaging - mixing takes place in the original packaging
- Hygienic and safe mixing without contamination
- Robust and durable construction made of stainless steel AISI 304
- Material: Stainless steel
- Country of origin: Slovakia
The 50 liter vacuum mixer with a tilting function is designed for gentle mixing of lightweight granules, dry powders, seeds, and similar products under vacuum conditions. Its unique tilting design with multiple locking positions allows continuous gravity-assisted mixing, improving circulation inside the vessel while minimizing manual intervention.
- Vacuum mixing for improved product homogeneity and reduced air content
- Gravity-assisted mixing with multiple tilting positions
- Tilting vessel up to 110° for almost complete product discharge
- Mobile stainless steel frame with locking caster wheels
- Gentle processing of granules, powders, seeds, and similar lightweight products
- Material: Stainless steel
- Engine power, kW: 90 W
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 50l
Equipment for mixing multi-component mixtures of products, such as vegetable salads with various dressings, including thick and viscous ones like mayonnaise, thick sour cream and other similar sauces.
- Hydraulic tilting system is included in the basic version
- The controls are located directly on the frame supporting structure
- Eccentrically offset working shaft for rotating/tilting the working tank
- Low loading height
- The installation is made entirely out of food grade stainless steel
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 600l/ 1000l
A universal vessel for mixing, whipping and stirring any products using a blade mixing device operating at high speeds.
- Crescent shaped mixing device with three sharpened blades (cutter knives)
- Special high speed drive
- Sandwich bottom for all types of heating surfaces (electricity, gas, induction).
The mixing speed of the TurboMix mixer is approximately 138 RPM at 50 Hz. If required, the mixing speed can be adjusted using an optional frequency converter.
- Productivity: 50l/ 100l
- Material: Stainless steel
- Engine power, kW: 0,55
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Diameter, mm: 400/ 500/ 600
Atmospheric cutter mixer with capacity of 150l for medium size production of confectionery, chocolate, ice cream, ready meals, cheese, cream smoothie, vegetable puree.
For more information, send us a request.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 150l
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 20l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
A rotating drum unit designed for continuous coating and seasoning operations as well as product saturation with spices and flavor additives, utilized in production lines for chips, snacks, and various semi-finished products.
- Adjustment of the Drum Tilt Angle
- Hygienic design and execution: mirror-polished inner surface of the drum
- Various blade options for gently turning the product (optional)
- Dispensers for dry and wet flavorings (optional)
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 0,25
- Voltage: 380-400V
The laboratory vacuum cutter mixer is designed for uniform grinding, emulsifying and mixing of food, cosmetic and pharmaceutical products, chemical mixtures with the addition of oil, dyes, concentrates or liquid flavors.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
Multifunctional vacuum mixer/homogenizer for grinding, mixing, and homogenizing products to obtain homogeneous masses.
- Built-in jacket for the bottom and walls of the unit.
- Cutter knives with a powerful electric drive
- Slanted design for efficient mixing and chopping
- Forced circulation circuit (optional)
- Wide range of options
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 350l/ 650l
- Total power, kW: 13/ 17
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Suitable for mixing a small amount of dough or meat as well as other thick mixtures.
- Material: Stainless steel
- Engine power, kW: 0,55
- Principle of operation: Batch mode
- Volume: 10l/ 20l
A vacuum diffuser is a device used in the food industry to remove oxygen from a product under vacuum conditions, primarily employed for enhancing the preservation of food by reducing oxidation and extending shelf life.
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of equipment: Individual machine
- Country of origin: Slovakia
- Volume: 200l/ 1000l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The Homogenizer F230 is a compact industrial processing unit designed for controlled heating or cooling, homogenization, and mixing of food products. The unit is equipped with a high-speed bottom-mounted homogenizer, an optional anchor stirrer, and a jacketed vessel (duplicator) for thermal processing, enabling stable product structure formation within a single installation.
- Built-in high-speed homogenizer for efficient particle size reduction
- Three-layer vessel with a jacket for heating or cooling (up to 0.5 bar)
- Optional frame mixer with adjustable speed via frequency converter
- Compact hygienic design for batch processing up to 200 L
- Suitable for homogenization, thermal processing, and fermentation-based applications
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 200l
Homogenizer for the production of whipped cream, ice cream, and much more. It allows you to obtain stable liquid emulsions of food mixtures.
- The homogenizer can be installed directly into the container with the product
- High productivity - in just 8 minutes, it is possible to whip up to 60 liters of milk mixture
- The peripheral speed of the knives is 16 m/s
- Material: Stainless steel
- Engine power, kW: 0,37/ 2,2
- Country of origin: EU
- Voltage: 380-400V
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
The Mak Mix tilting mixer is designed for preparing liquid and semi-liquid doughs. It's suitable for mixing dough for waffles, pancakes, cakes, and other baked goods.
- Made entirely out of stainless steel
- Features a tilting system with multiple working positions (up to 110°) for gravity mixing and quick emptying of the mixing bowl
- Frame mixer with a professional industrial motor
- Reinforced high-speed mixer for intensive mixing and kneading
- Safety switch on the top housing for safe operation: the mixer is switched off when the lid is opened
- Simple and easy to clean; the lid and mixer can be quickly and easily removed for cleaning
- Material: Stainless steel
- Engine power, kW: 0,37/ 0,55
- Volume: 50l/ 100l
- Voltage: 220-230V
- Stirrer speed, rpm: 35