









Pump for liquid products
The pump provides a delicate straight-streaming pumping of a wide range of liquids with or without solid fragments with viscosity up to 150 Pa.s.
The screw pump is designed for a delicate straight-streaming transport of a wide range of liquids with or without solid fragments with a viscosity of up to 150 Pa.s.
The pumps suck from depth up to 6 meters under their own level. Their constructions allow reversible depending on the direction of the electric motor.
Advantages:
- Block pump – directly joined to the shaft of the electric motor.
- Standing on the heels of the electric motor.
- Material AISI 304/ EPDM
- Standard Inlet / Outlet: male union joints DIN 11851
- Optionally: Block pump with protective eccentric cover on the engine
Specification:
- Capacity: Q= 1.5 m³/h
- Pressure/Head: H= up to 6.0bar
- El.motor: P = 1.1 kW
- Inlet/Outlet: Dy 40/Dy 40
- Material: AISI 304, NBR
Optional modifications:
- * with double wall for cooling/heating
- * with double mechanical sealing
- * mounted on a trolley with Starter
- * by-pass with safety overflow valve
- * gear-motor
- * variable-speed drive
- Material: Stainless steel
- Engine power, kW: 1,1
- Principle of operation: Continuous mode
Screw pump
You might also like
Centrifugal pump designed for pumping low viscosity food and aggressive liquids.
- Principle of operation: Continuous mode
One of advantages of this glandless pump is very high durability and efficiency in operation in very demanding conditions. We offer glandless pump with different power variations.
- Principle of operation: Continuous mode
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.
- Principle of operation: Continuous mode
Monoblock pumps with an integrated frequency converter. We offer many different types of pumps, if you need any advice on which pump to choose, feel free to send us the request.
- Principle of operation: Continuous mode
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
The homogenizer is designed to homogenize, mix and disintegrate / grind different fluids and components into small particles.
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
Designed for pumping hot thermal oil in frying circulation and filtration systems, for oil loading and unloading, in "hot" continuous oil filtration systems with a maximum temperature of up to 200 degrees.
- Material: Stainless steel
- Engine power, kW: 0,55
- Country of origin: Slovakia
The homogenizer is designed to homogenize, mix and disintegrate / grind different fluids and components into small particles.
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
Twin-screw extruder is designed for effective extruding, homogenization, pumping over of plastic masses (butter, margarine, honey, curd products, confectionery mixtures), and forming it into bars and rolls.
- Productivity: 400 kg/h
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Weight: 115 kg
We offer different types of pumps for different applications.
- Principle of operation: Continuous mode
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension.
- Principle of operation: Continuous mode
The portable vertical pump is designed for pumping fluent or viscous liquids in the range from 1-2300 m2/s at a temperature of around 25°C. The pump cannot be used in potentially explosive atmospheres.
- Material: Stainless steel
- Engine power, kW: 0,25
- Voltage: 380-400V
Stainless steel low-speed rotary pumps with a flexible impeller; We offer two versions. On base or trolley.
- Principle of operation: Continuous mode
The lobe rotary pumps are designed for pumping both liquid and thick products. We offer lobe pumps in 2 versions with 1.5 kW is a standard for milk, cream and similar products, and 3 kW is for dense low-flow products such as honey, pastes, cottage cheese etc.
- Engine power, kW: 1,5 / 3
One of advantages of this glandless pump is very high durability and efficiency in operation in very demanding conditions. We offer glandless pump with different power variations.
- Principle of operation: Continuous mode
The screw pump is used for transferring "un-pumpable" products. A great choice for those who work with hard to move liquids and need to move them as quickly as possible.
- Material: Stainless steel
- Voltage: 380-400V
Vane pumps are used for pumping high viscosity products such as syrups, honey, mayonnaise, sauces, cream and many other products.
- Material: Stainless steel
- Engine power, kW: 2,2
- Type of pump: rotary vane
This system is specifically designed for facilitating the direct transfer of pulp to a press.
- Productivity: 2000 kg/h
- Engine power, kW: 0,37
- Weight: 28
- Type of pump: Volumetric, self-priming
The high-performance screw pump is used for pumping both thick and viscous food products, as well as various masses containing pieces or solid inclusions such as in the cosmetics, cosmetology, and other industries.
- High performance
- All parts in contact with the product are made out of AISI304
- Does not damage products containing solid pieces
- Additional options: by-pass
- Material: Stainless steel
- Engine power, kW: 1,1/ 1,5 / 3
- Principle of operation: Continuous mode
Centrifugal impeller pumps are ideal for various industrial applications such as food processing, manufacturing, washing and surface treatment of metal pieces, boxes, containers, glass jars and vessels. These pumps are also suitable for dishwashers, bottle washing lines, painting processes, and pumping liquids into various chambers.
- Principle of operation: Continuous mode
Progressive cavity pumps are used to transfer low and high viscosity products as well as products containing soft particles. They are available in three sizes.
- Material: Stainless steel
- Engine power, kW: 3/ 4
We offer different types of pumps for different processes.
- Engine power, kW: 0,37
- Dimensions, mm: 230x190x120


