Double Z sigma arm mixer
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
The multifunctional Z-shape double blade mixer is widely used in various industries: food, chemical, pharmaceutical, cosmetics and many others, where it is necessary to mix complex, heavy, thick and viscous products with a high degree of homogenization. Mainly, double z mixers are used for kneading thick, stiff dough in the confectionery industry as well as in the production of raw, muesli and protein bars, where it is necessary to obtain a thick, homogeneous mixture of cereals, honey, nuts, dried fruits, fondant and so on.
Best for mixing viscious pastes.Â
The Z blade mixer can be used to process and produce products such as:
|
|
|
|
|
|
|
|
|
|
Advantages:
- Independent drive for each Z-shaped blade with the ability to adjust the speed and direction of rotation. For each type of product it is possible to choose its own mixing diagram; each Z blade shaft can rotate in its own direction and at its own speed.
- The ability to choose the side of product unloading, the control system includes both tilting options up to 180 degrees.
- The control is located directly on the mixer; the basic version provides a semi-automat (semi-automatic control panel) with the possibility of individual settings for each system. As an option, an HMI touch screen with semi-automatic control can be installed on the side of the control panel. The HMI panel can be equipped with a memory module for creating and saving recipes.
- The special shape of the working container in the form of a small Greek letter ω allows for a minimum gap between the walls and the edge of the mixing device blade for highly efficient mixing, including bulk and powder products.
- High degree of safety: lid opening sensors and a working container position sensor, which guarantee safety for operator maintenance.
- Massive supporting structure for the stability of the mixer during operation and reduction of vibration.
- The mixer is made entirely out of food grade stainless steel AISI304; a stainless steel control panel can also be installed as an option.
- Automatic tilting system for the working container, depending on the volume and model, the tilt drive can be electric or hydraulic. Tilting is performed using a joystick mounted on the control panel, up to a maximum tilt angle of 180 degrees.
- Highly economical: mixers with two Z-shaped blades are the optimal choice for both small production and industrial-scale production, as they allow large volumes of product to be efficiently processed in a relatively small area.
- Hygienic design, easy maintenance and cleaning of equipment.
Basic version
The modification of the basic configuration includes a working container suspended on a supporting structure, inside of which special 2 Z-shaped blades, and a mixing device with an independent adjustable electric drive are installed. The working container is equipped with a lid and a control panel. The basic version includes a semi-automatic control panel (semi-automat), which allows you to adjust the direction, speed of rotation of the shafts with z-shaped blades, and automatically tilt the working bowl. In the basic configuration, tilting and unloading can be done in both directions.
Models
| Geometric volume, l   | Working volume, l      | Maximum load, kg         |
| 70 | 50 | 36-50 |
| 140 | 100 | 70 |
| 460 | 300 | 200 |
| 700 | 470 | 250 |
Options
- Control panel with a HMI panel (touch screen)
- Memory module with the ability to save recipes (when ordering the remote control option with an HMI panel)
- Control panel (electrical cabinet) made out of stainless steel
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 70l/ 140/ 300l/ 460/ 700l/
- Voltage: 380-400V
You might also like
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 150l/ 200l/ 500l
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
- Engine power, kW: 0,37/ 0,55/ 1,1
- Volume: 20l/ 75/ 100l
The NDM + drum mixer is designed for thorough mixing while retaining the structure of loose products without dead zones and with relatively low consumption and short mixing time. Made for mixing products such as coffee, tea, nutrients and supplements, baby food and many others.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 1000l
An evaporating unit is utilized to remove moisture from sweet substances through heating, transforming them into concentrated syrups or solutions.
- Material: Stainless steel
- Heating power, kW: 30
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Voltage: 380-400V
- Geometric volume: 200 l
Homogenizer for the production of whipped cream, ice cream, and much more. It allows you to obtain stable liquid emulsions of food mixtures.
- The homogenizer can be installed directly into the container with the product
- High productivity - in just 8 minutes, it is possible to whip up to 60 liters of milk mixture
- The peripheral speed of the knives is 16 m/s
- Material: Stainless steel
- Engine power, kW: 0,37/ 2,2
- Country of origin: EU
- Voltage: 380-400V
Mixers are carefully designed, constructed and tested to handle a variety of industrial applications that require mixing, dispersive mixing, distributive mixing and more.
- Material: Stainless steel
- Country of origin: Slovakia
- Voltage: 380-400V
- Geometric volume: 500 l
The industrial planetary mixer is mainly used in the confectionary industry. Available in three different sizes: 120, 140 and 170 L.
- Engine power, kW: 5,5
- Voltage: 380-400V
Model VMG S is an effective and reliable vacuum homogenizing unit designed to produce a wide range of liquid, pastry and viscous products with different requirements for the production conditions.
The homogenization of butter is carried out in order to improve the butter's consistency and taste stability under storage conditions.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
The cooking boiler is equipped with a jacket for heating as well as a heating system, an electrically driven stirrer (with a geared motor) and Teflon scrapers, which allow for the processing of products with low to medium viscosity. The cooking device is also equipped with a vacuum system.
- Productivity: 100l
- Material: Stainless steel
- Operation mode: Automatic
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
Suitable for mixing a small amount of dough or meat as well as other thick media.
- Material: Stainless steel
- Engine power, kW: 0,55
- Principle of operation: Batch mode
- Volume: 10l/ 20l
The Economy series of the cooking kettles comprise a thick-walled stainless steel container with an electric mixer mounted on the quick-release upper housing. The installation allows you to mix and stir products during processing. The thick bottom of the pot allows it to be installed on all types of heating surfaces (gas, induction or electric stove).
The Economy version is recommended for use with low-viscosity liquid products; If processing thick and viscous products is necessary, we offer the Premium version of the cooking kettle.
- Sandwich bottom (multilayer) for use on all types of hobs, including induction
- Quick release lid with an electric stirrer
- Safety grid under the upper hull hatch - safe handling when stirring
- Possibility of visual inspection through the safety grid during processing
- Safe loading of components even during mixing
- Material: Stainless steel
- Engine power, kW: 0,12
- Volume: 20l/ 50l/ 100l/ 150l
- Voltage: 220-230V
A spiral mixer with a fixed bowl and an electronic control panel. Available in various different capacities.
- Principle of operation: Batch mode
- Volume: 60l/ 80l/ 120 l/ 160 l/ 200l/ 250 l
- Voltage: 380-400V
A twin-screw mixer with a homogenizer is an ideal solution for the production of creamy cheese, such as feta cheese, including with various flavors and seasonings. Thanks to mechanical homogenization, the cheese acquires a delicate structure without changing the individual taste properties of the product. It is used for plasticizing, creaming and softening butter, margarine and other fats.
- A capacious volumetric mixer with a capacity of 50 l
- Compact tabletop design for convenient operator maintenance
- A powerful independent drive for each screw with a reverser
- Easy maintenance and cleaning of the equipment
- Productivity: 250 kg/h/ 1500 kg/h
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 3,5
- Voltage: 380-400V
The dough mixer is a batch type mixing equipment, working in the opposite direction, to produce a wide range of dispersions and emulsions of varying viscosity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
- Material: Stainless steel
- Principle of operation: Batch mode
The mixers are made up of a double-walled cylindrical stainless steel vessel with cavity, with drain hole and 50 cm diameter butterfly valve. The cavity is filled with water which is heated by an electric resistance thermostat. The honey is mixed by blades with a marine propeller profile, adjustable in height along an oblique shaft.Â
- Material: Stainless steel
- Engine power, kW: 0,37/ 0,55/ 1,1
- Principle of operation: Batch mode
- Volume: 100 kg / 250 kg/ 600 kg/ 1000 kg/ 2000 kg
Paddle Mixer type is designed for fast and precise mixing for meat-mass production in meat processing factories. Can also be used for mixing products such as spices or tea.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 90/ 150l/ 200l/ 300l/ 400l/ 600l/ 850/ 2000 3000
The complex of equipment for the production of mayonnaise consists of several installations for automatic dosing, mixing, and obtaining a stable emulsion.
- Compact design, offering convenient and straightforward operation in a limited space.
- Cost-effective solution for automatic dosing without incurring high automation costs.
- A wide range of additional modular options.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Total power, kW: 13,5
- Voltage: 380-400V