Continuous rotary drum mixer
The continuous rotary mixer is a professional solution for mixing, stirring powder and bulk materials.
- Allows precise dosing of components during continuous mixing
- Low energy consumption with high processing volumes
- Made entirely out of stainless steel
- Adjustable working drum tilt
- Special blades for mixing bulk and fragile materials
The continuous drum mixer enables mixing of various bulk materials in a continuous flow. The system allows accurate dosing of materials to obtain homogeneous multi-component mixtures.
This drum mixer is designed for mixing and stirring powders and bulk materials in the food industry, it can also be used for the preparation of sand and clay-based products.
Advantages
- Possibility to adjust the speed of the drum rotation and mixing
- Possibility to change the tilt angle of the working drum
- Easy to integrate into a production line
- Possibility to connect a cyclone filter when processing highly dusty products
- Possibility of automatic and precise dosing of components (optional)
- Working length of the drum depends on the product and the desired productivity
Basic version
It consists of a suspended drum mounted on a supporting frame structure, with a mechanism for mechanically adjusting the tilt angle of the drum. Paddles are installed inside the drum to assist with mixing. The drum rotation speed can be adjusted using an independent control panel - a frequency converter with IP66 protection.
Options
- Precise dosing of components for mixing
- Automatic dosing
- Possibility to select the paddles / blades for the product
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
You might also like
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 70l/ 140/ 300l/ 460/ 700l/
- Voltage: 380-400V
Convective rotary drum dryers are used for drying granular, loose and bulk materials. They can be used for drying salt, coffee, various granules, powders, grain, nuts, seeds, fruit/vegetable bagasse, and many other products. When used in other industries, the dryer allows for the drying of salt, sand, expanded clay granules, and other similar non-flammable substances. For more information, send us a request.
The drum dryer can be configured to operate with either electric heating or gas heating (which can offer a lot more power), depending on your specific requirements and preferences.
Warning: It is not recommended to use the gas heating option for drying substances that are highly flammable, as doing so could pose a significant fire risk.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
The periodic drum coating/seasoning machine is designed to saturate and infuse a diverse range of products with flavorful aromas, vitamins, and various taste additives. It is utilized in the production of snacks, chips, cereals, and nuts, offering a wide array of flavor enhancements.
- Mechanical system for tilting the working bowl with fixation points in intermediate positions
- Special perforated blades for gentle product turning
- Powerful drum rotation drive
- Entirely made out of food grade stainless steel AISI304
- Easy control via an inverter (optional): speed control and reverse
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Total power, kW: 0,55
A rotating drum unit designed for continuous coating and seasoning operations as well as product saturation with spices and flavor additives, utilized in production lines for chips, snacks, and various semi-finished products.
- Adjustment of the Drum Tilt Angle
- Hygienic design and execution: mirror-polished inner surface of the drum
- Various blade options for gently turning the product (optional)
- Dispensers for dry and wet flavorings (optional)
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 0,25
- Voltage: 380-400V
A cooking kettle and a vacuum mixer for periodic deaeration of products such as mayonnaise, ketchup, various sauces, creams, gels and pastes. It is one of the modifications of a vacuum reactor and a vacuum evaporator. The presence of a vacuum system allows you to create a vacuum after the cooking process and perform vacuuming (deaeration) to remove air bubbles with potential contaminants and obtain a product with a denser structure. Thanks to vacuuming, the product has an extended shelf life, since pathogens and microbes contained within are removed together with the air.
- Inclined design with gravity mixing, which is 30% more efficient than usual
- 100% emptying of the product after processing due to the bottom valve
- Easy to disassemble removable mixing device
- Possibility of connecting it to a CIP station for cleaning and washing
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 100l
- Total power, kW: 0,12
- Max vacuum: -0,8 Bar
Butter churner with a volume of 50 L and a usable volume of 25 L for the traditional production of butter from cream.
- Material: Stainless steel
- Engine power, kW: 0,55
- Geometric volume: 50 l
Vacuum mixer processing plant for viscous products is an ideal solution for the production of pilot batches and the industrial manufacturing of a wide range of products from small to medium capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 50l
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 70l/ 140/ 300l/ 460/ 700l/
- Voltage: 380-400V
The vacuum homogenizer with an inclined design is designed for processing and manufacturing a wide range of liquid, pasty and viscous products with different requirements for their production conditions and other products including those with a high viscosity.
- Material: Stainless steel
- Engine power, kW: 1,5 KW
- Principle of operation: Batch mode
- Country of origin: Slovakia
Stainlees steel free standing mixer for meat and dough.
- Material: Stainless steel
- Engine power, kW: 0,75 1,1
- Principle of operation: Batch mode
- Volume: 40 60l/ 80l/ 120l
The CookMak Mix is an electric tilting cooking kettle with an integrated agitator system for professional batch production. It is designed for cooking, heating and mixing liquid, semi-viscous and thicker food products such as sauces, soups, jams, fruit preparations, creams, fillings and syrups. The tilting system enables efficient mixing and complete product discharge, while the heated sandwich bottom ensures uniform heat transfer. It is available in working volumes from 20 to 150 liters.
Uniform heating
Continuous mixing
Complete discharge
Gravity mixing
The twinscrew mixer with two horizontal shafts is designed for intensive mixing and kneading dough as well as chocolate, pralines and other similar products with medium or high viscosity.
- Material: Stainless steel
- Engine power, kW: 2,2
- Country of origin: Slovakia
- Weight: 281 kg
- Volume: 500l
These meat mixers are characterized by their modern design and strong AISI 304 stainless steel construction.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 110 l/ 163 l/ 250l/
The VMG S 650P vacuum homogenizing unit can be used for making toothpaste as well as a variety of similar products with complex production requirements.
- The vacuum ensures effective air removal, eliminating the conditions for the development of bacteria and other pathogenic organisms.
- The special shape of the mixing device is tailored for the thickest and most viscous products.Â
- The Ultra Shear submersible homogenizer creates a stable emulsion.
- The cavitation processes aid in activating hydrodynamic mixing.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 29
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 650l
- Total power, kW: 52
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Model VMG S is an effective and reliable vacuum homogenizing unit designed to produce a wide range of liquid, pastry and viscous products with different requirements for the production conditions.
The vacuum homogenizer is designed for whipping mayonnaise, ketchup, various sauces, confectionery pastes and fillings, condensed milk, jams and marmalades, canned goods, as well as similar liquid or pasty products with a homogeneous structure.
- Homogenizer in an external circulation loop
- Built-in vacuum generation and retention system
- Modular design with numerous options
- Possibility of automatic dosing of ingredients (optional)
- No additional pump required for loading/unloading
- Automatic top cover lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 650l
- Total power, kW: 13,5
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Universal cooking kettle for thick mixtures: it works on the principle of a water bath and can be used in confectionery shops, bakeries and other catering establishments. Offers a wide variety of models.
- Mechanical tilting system for unloading
- Safety grill for the mixer drive
- Built-in electric heating up to 150 degrees
- Mobile support structure on wheels
- Heating: Electric
- Principle of operation: Batch mode
- Volume: 30l/ 60l/ 80l/ 120l
The price is indicated for the basic version of the set of equipment with a homogenizer
The equipment for the production of ice cream mixtures is based on a universal vacuum reactor with a coolant jacket and a multi-stage dispersant/homogenizer in an external circulation loop.
- Special type of a stirring device for easy disassembly and cleaning
- Processing with minimal product loss
- The bottom outlet valve is included in the basic version of the installation
- Multi-stage disperser for intensive wetting and homogenization of the flowing mixture
- External circulation circuit with a three-way valve for operation/washing of the equipment
- Reinforced agitator drive for thick and viscous mixtures
- Built-in vacuum pump
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Total power, kW: 3
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Mixers are carefully designed, constructed and tested to handle a variety of industrial applications that require mixing, dispersive mixing, distributive mixing and more.
- Material: Stainless steel
- Country of origin: Slovakia
- Voltage: 380-400V
- Geometric volume: 500 l
A twin-screw mixer with a homogenizer is an ideal solution for the production of creamy cheese, such as feta cheese, including with various flavors and seasonings. Thanks to mechanical homogenization, the cheese acquires a delicate structure without changing the individual taste properties of the product. It is used for plasticizing, creaming and softening butter, margarine and other fats.
- Capacity of the receiving hopper 50L
- Compact tabletop design for convenient operator maintenance
- A powerful independent drive for each screw with a reverser
- Easy maintenance and cleaning of the equipment
- Productivity: 250 kg/h/ 1500 kg/h
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 3,5
- Voltage: 380-400V