Suitable for homogenization (grinding, mixing, emulsification, uniform distribution of components throughout the volume) of fluid as well as viscous and thick emulsions, with the purpose of obtaining highly dispersed and resistant multicomponent mixtures from hard to mix liquids or dry ingredients.
The process of mixing is performed with these equipment:
- vertical mixer/ horizontal
- storage tanks
- Vertical mixer
Spiral sscending movement around the circuit generates a continuous flow of the mixture from the center downwards. The industrial mixer therefore provides unparalleled quality two-way mixing screw at the bottom ensures full product outlet.
Horizotal mixer with two shafts-high quality and efficient device which is suitable for continuous mixing includes measurement and control systems suitable for continuous operation, the movement of two counterrotating agitator shaft provides intense vertical and horizontal movement of the mix. The design is low maintenance, includes integrated CIP station - tube cleaning further platform for mixer platform for dosing (allows an accurate dosing).
The mixer is a closed cylindrical container. All parts in contact with the product are made of stainless steel. Procedure: The colloidal and rigid parts of the mixture enter into the holes at the top of the device. Subsequently, the product is in a continuous motion thoroughly mixed. The stirrer is positioned about 9 mm and above the bottom of the tank at a distance of 5 mm.
The device allows you to avoid clumping, which often occurs when mixed. This enables you to produce better products, since homogeneity is preserved.
The device can be used for mixing mutually insoluble substances, and also mixtures of solid powders and mixtures of mutually soluble components.
Areas of use:
- Food industry
- Cosmetic industry
- Pharmaceutical industry
- Chemical industry
- Construction/building industry
Benefits:
- The mixer is equipped with a ring-type CIP cleaning system, therefore cleaning of the equipment occurs quickly and efficiently.
- The equipment is made of high quality food grade stainless steel AISI 304, AISI 316
- Low unloading time and optimal unloading of residues
- Hygiene - eliminates the danger that the product will be contaminated with lubricant or the like
- Extremely simple cleaning.
At the customer's request, the following options may be included:
- production in accordance with GMP standards
- equipment lifting stand for easier care of the homogenizer
- complete set with the converter of frequency of rotation for increase in speed of rotation of a rotor


- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
You might also like
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
- Engine power, kW: 0,37/ 0,55/ 1,1
- Volume: 20l/ 75/ 100l
Stainlees steel free standing mixer for meat and dough.
- Material: Stainless steel
- Engine power, kW: 0,75 1,1
- Principle of operation: Batch mode
- Volume: 40 60l/ 80l/ 120l
The Y-shaped food mixer contains a double vessel with a 90° apex angle. This mixing system is designed for mixing, pre-mixing liquid, viscous, dry and bulk components to obtain homogeneous mixtures.
- Special shape designed for fragile products that may break when exposed to centrifugal force
- Effective mixing of products with different components to obtain a homogeneous structure quickly and with minimal energy consumption
- Gentle mixing and tumbling due to complex random trajectories of product movement
- Compact installation
- Easy maintenance and high level of safety - safety bar with a position sensor
- Material: Stainless steel
- Engine power, kW: 0,75
- Volume: 150l
The twinscrew mixer with two horizontal shafts is designed for intensive mixing and kneading dough as well as chocolate, pralines and other similar products with medium or high viscosity.
- Material: Stainless steel
- Engine power, kW: 2,2
- Country of origin: Slovakia
- Weight: 281 kg
- Volume: 500l
The conical bottom mixer with a 400-liter capacity is designed for efficient mixing and smooth product discharge. Its conical shape directs contents toward the lower outlet, making it ideal for processing thicker or denser materials in an atmospheric-pressure environment.
- Heating: Electric
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 400l
- Voltage: 380-400V
This mixing machine is intended for mixing sauerkraut with carrots, beets, salt, spices, also for salad, kimchi mixing etc.
- Material: Stainless steel
- Engine power, kW: 2,2
- Volume: 300l/ 600l/
The cooking boiler is equipped with a jacket for heating as well as a heating system, an electrically driven stirrer (with a geared motor) and Teflon scrapers, which allow for the processing of products with low to medium viscosity. The cooking device is also equipped with a vacuum system.
- Productivity: 100l
- Material: Stainless steel
- Operation mode: Automatic
- Principle of operation: Batch mode
- Type of equipment: Individual machine
The atmospheric tank with an inclined design is used for mixing, stirring, and dissolving various products. By supplying a thermal carrier to the unit’s jacket (duplicator) from an external source, thermal processing such as heating or cooling can occur (i.e. heating or cooling from an external coolant source with an inlet pressure of up to 0.5 bar). These units are widely utilized in the food and cosmetic industries.
- Inclined design: 50% more efficient mixing
- Due to the inclination angle of the working tank, rapid and complete (100%) emptying is achieved.
- Efficient heat transfer through the heating/cooling jacket
- No dead zones during mixing!
- Modular system with a wide range of additional options
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of equipment: Individual machine
- Country of origin: Slovakia
- Working volume: 100l/ 200l/ 300l/ 450l/ 600l/ 900l
The industrial planetary mixer is mainly used in the confectionary industry. Available in three different sizes: 120, 140 and 170 L.
- Engine power, kW: 5,5
- Voltage: 380-400V
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 70l/ 140/ 300l/ 460/ 700l/
- Voltage: 380-400V
The tank is designed for heating and mixing liquid food mixtures, including chocolate, butter, margarine, honey and similar products.
- Material: Stainless steel
Atmospheric cutter mixer with capacity of 150l for medium size production of confectionery, chocolate, ice cream, ready meals, cheese, cream smoothie, vegetable puree.
For more information, send us a request.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 150l
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum vessel with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum cooking kettle, and a unit for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Equipment for mixing multi-component mixtures of products, such as vegetable salads with various dressings, including thick and viscous ones like mayonnaise, thick sour cream and other similar sauces.
- Hydraulic tilting system is included in the basic version
- The controls are located directly on the frame supporting structure
- Eccentrically offset working shaft for rotating/tilting the working tank
- Low loading height
- The installation is made entirely out of food grade stainless steel
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 600l/ 1000l
A twin-screw mixer with a homogenizer is an ideal solution for the production of creamy cheese, such as feta cheese, including with various flavors and seasonings. Thanks to mechanical homogenization, the cheese acquires a delicate structure without changing the individual taste properties of the product. It is used for plasticizing, creaming and softening butter, margarine and other fats.
- Capacity of the receiving hopper 50L
- Compact tabletop design for convenient operator maintenance
- A powerful independent drive for each screw with a reverser
- Easy maintenance and cleaning of the equipment
- Productivity: 250 kg/h/ 1500 kg/h
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 3,5
- Voltage: 380-400V
The conical bottom mixer with a 400-liter capacity is designed for efficient mixing and smooth product discharge. Its conical shape directs contents toward the lower outlet, making it ideal for processing thicker or denser materials in an atmospheric-pressure environment.
- Heating: Electric
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 400l
- Voltage: 380-400V
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
A universal vessel for mixing, whipping and stirring any products using a blade mixing device operating at high speeds.
- Crescent shaped mixing device with three sharpened blades (cutter knives)
- Special high speed drive
- Sandwich bottom for all types of heating surfaces (electricity, gas, induction).
The mixing speed of the TurboMix mixer is approximately 138 RPM at 50 Hz. If required, the mixing speed can be adjusted using an optional frequency converter.
- Productivity: 50l/ 100l
- Material: Stainless steel
- Engine power, kW: 0,55
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Diameter, mm: 400/ 500/ 600
These meat mixers are characterized by their modern design and strong AISI 304 stainless steel construction.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 110 l/ 163 l/ 250l/
Professional cooking boiler with a stirrer for particularly thick and viscous products. An excellent technical solution for the production of caramel, syrups and sugar paste for sugaring. The heating source is selected separately.
- The kettle can be used on all types of cooking surfaces, including induction
- The basic version has easily removable, self-aligning stainless steel scrapers
- Adjustable stirrer speed: 0–35 rpm (basic version), recommended range 10–25 rpm
- Professional 3-phase industrial motor
- The stirrer is turned on independently using a remote control with IP66 protection, connected to the boiler using quick-release connectors
- The unit can be connected to a 220-230 volt network even with a 3-phase motor!
- Material: Stainless steel
- Engine power, kW: 0,25/ 0,37
- Volume: 20l/ 50l/ 100l/ 150l
- Voltage: 220-230V
- Diameter, mm: 400/ 500/ 600
The vacuum cutter is intended for large processing enterprises dealing in the confectionery, fruit and vegetable processing industries. They are intended for processing food down to a homogenous mixture with minimal air content.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Voltage: 380-400V