Fryer for crispy onions with a deoiling centrifuge
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product†after frying
- Low carbonization of oil due to the cleaning feature after frying
An atmospheric electric immersion fryer with a centrifugal system for removing excess oil is used both for laboratory purposes in large enterprises and small food processing businesses that work with various products in smaller volumes.
A deep fryer with a system for removing excess oil is the optimal solution for frying sliced or chopped products and small raw materials such as:
|
|
|
|
|
|
|
Advantages:
- The installation allows you to process products with a fragile structure and a small size; the basket has sections inside which the product is evenly fried.
- Constant circulation of oil through the built-in filtration system extends the life of the oil and reduces its carbonization.
- After a quick frying in hot oil, the product closes its pores, ensuring maximum retention of the beneficial substances contained inside and preventing oversaturation with oil.
- The centrifuge separator allows you to obtain a 'dry' product after frying with a minimal oil content!
Basic version
The installation consists of a frying container with an oil heating and storage bath, a built-in electrically driven centrifuge, a special pump for hot oil and a piping system connecting the frying section with the heating section. The heating control is located directly on the units body; the centrifuge rotation speed can be adjusted through the inverter. The basic version includes one sectional basket with a lid.
Principle of operation
A special feature of the installation is the ability to remove residual oil from the product, obtaining a dry product at the output. To achieve this, a special system that spins the basket with the product after draining the oil is used, where due to the centrifugal force, drops of oil located on the surface of the product are sprayed onto the walls of the working container and flow through the drain hole into the container for storing and heating the oil.
Options:
- Additional basket
- Basket lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
You might also like
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
- Productivity: 160 kg/15 min
- Material: Stainless steel
- Heating power, kW: 90/ 110/ 180
- Country of origin: Slovakia
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 20l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor and the paddle conveyor – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
The combination of the compact 400/1100/12 fryer with the secondary upper pressure conveyor, allows you to expand the variety of products that can be fried on it. It ensures uniform, high-quality frying of fresh and semi-finished products in small to medium scale, making it suitable for small-scale production, professional kitchens and street food businesses. The fryer fully submerges the product in oil throughout the whole frying process with the help of the second pressure conveyor that forces the product beneath the oil's surface.
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200°C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
An adjustable electric donut fryer with a continuous conveyor system is specially designed for small confectionery shops, pastry production and catering establishments. It is capable of frying a variety of products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
- Material: Stainless steel
- Heating power, kW: 12
- Country of origin: Slovakia
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
- Material: Stainless steel
- Heating power, kW: 72
- Principle of operation: Continuous mode
- Working Area Width: 420 mm
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Continuous mode
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.Â
For more information please email sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Type of the equipment: Individual machine
- Country of origin: Slovakia
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method which helps to close down the pores of the product to prevent excessive oil absorption. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
Price depends on the chosen option. Please email sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 36
- Principle of operation: Continuous mode
- Country of origin: Slovakia
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
For additional information, please contact us at sales@foodtechprocess.com
- Material: Stainless steel
- Type of the equipment: Individual machine
- Country of origin: Slovakia
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
Production line for vegetarian vegetable-based formed or molded products such as falafel. The line is based on the classical method of producing semi-finished products for their subsequent freezing and packaging.
- Compact line suitable for both professional kitchens and industrial production.
- Fully automatic operation with minimal manual labor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Voltage: 380-400V
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email at sales@foodtechprocess.comÂ
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: EU
- Voltage: 380-400V