Continuous oil pouring fryer CombiFry 600/2000
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
The CombiFry fryer works on the principle of hot oil pouring and immersion frying methods. Oil pouring and immersion frying methods guarantee a high quality of the finished product.
The plant is suitable for frying meat, fish, vegetables and pasta products such as dumplings with a hard or a fragile structure.
Products:
- Vegetables
- Fish
- Meat
- Pasta
- Chicken legs and wings
- Hamburgers
- Nuggets
- Croutons
- Rings for different vegetables, such as onion, zucchini or eggplant
- And other similar products
Frying methods
The deep fryer combines the possibility of immersion frying and as well as pouring with oil. These methods are effectively used for frying large pieces of meat or fish products, where high quality frying is a must. Hot oil forms a layer on the surface of the product, intensive circulation of oil between the product and the heating source maintains a uniform set temperature throughout the frying zone.
A smart heat exchange system ensures frying efficiency as if the product is constantly stirred in hot oil. The system operates with a low oil volume, which significantly reduces the manufacturer's costs associated with the replacement and disposal of used oil.
Intensive oil circulation and constant filtration ensure unsurpassed frying quality while still maintaining all operational advantages.
The CombiFry fryer is equipped with oil filters that purify the oil as it circulates during the frying process. Multi-stage stainless steel filters continuously remove fine product details, allowing the operator to visually determine the degree of contamination of the filter and the need to clean it. The filter can be cleaned while the unit is still running, the oil filtration continues through the second double filter.
The intensive oil circulation between the heat exchanger and the product, as well as the precise temperature control, prevent the oil from overheating, keeping the beneficial properties of the product intact.
Advantages
- High quality European standards. The device is completely made of stainless steel, which guarantees a long service life. The equipment is hygienic and easy to clean.
- High quality of the finished product, thanks to gentle processing, oil filtration and smart temperature control. High efficiency is achieved due to low oil consumption and continuous oil filtration.
- Flexibility: The continuous fryer can be equipped with an electric, steam or gas heating system.
- Energy efficiency. Maintain the set temperature evenly over the entire frying surface.
- The fryer combines the possibility of immersion frying and oil pouring.
You might also like
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.
For additional information, please contact us at sales@foodtechprocess.com
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor and the paddle conveyor – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
The combination of the compact 400/1100/12 fryer with the secondary upper pressure conveyor, allows you to expand the variety of products that can be fried on it. It ensures uniform, high-quality frying of fresh and semi-finished products in small to medium scale, making it suitable for small-scale production, professional kitchens and street food businesses. The fryer fully submerges the product in oil throughout the whole frying process with the help of the second pressure conveyor that forces the product beneath the oil's surface.
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
For additional information, please contact us at sales@foodtechprocess.com
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email at sales@foodtechprocess.comÂ
Automatic donut fryers are extremely efficient machines designed for easier production of doughnuts.Â
An adjustable electric donut fryer with a continuous conveyor system is specially designed for small confectionery shops, pastry production and catering establishments. It is capable of frying a variety of products similar to donuts.
For more information, please contact us at sales@foodtechprocess.com
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor and the paddle conveyor – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@foodtechprocess.com
Production line for vegetarian vegetable-based formed or molded products such as falafel. The line is based on the classical method of producing semi-finished products for their subsequent freezing and packaging.
- Compact line suitable for both professional kitchens and industrial production.
- Fully automatic operation with minimal manual labor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Voltage: 380-400V
We can help you choose the right continuous fryer suited for your needs.
For a free consultation or a quote, please send us an email at sales@foodtechprocess.com
The price is set based on the basic built-in heating option of 24 kW.
The vacuum fryer is designed for frying foods in oil at low temperatures, allowing for the production of healthy snacks such as vegetable and fruit chips. The vacuum feature enables you to reduce the frying temperature of oil down to 110-120 degrees!
- «Cold roast» is a tasty and healthy method of processing the product
- Drying and frying without caramelizing the sugars contained in the product
- Large frying tank - for processing foods with a higher water content
- Modular heating system which allows you to increase the heating power up to 108 kW (optional)
- Circulating heating of oil through a heat exchanger minimizes oil spoilage and prevents localized overheating
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l
- Oil volume: 200l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Multifunctional pans function as a frying, cooking, and mixing device in one installation.
For more information on our automatic Wok-style frying pan with a built in mixer, please contact our sales department at sales@foodtechprocess.com