Double-conveyor continuous fryer 400/1850/24
The extended version of the modular conveyor fryer with a large number of optional accessories, significantly expands the production capacity for deep-frying various products by increasing both the frying area and heating power.
- Frying time can be adjusted from several minutes up to an hour!
- Overheating safety sensors are installed on each heating element
- Compact support structure on a mobile support
- Fine-mesh conveyor grid allows for frying small and fragile products
- A large number of additional options in the form of automatic oil top-up system, loading conveyor, filtration system, cooling conveyor, etc.
A double-conveyor fryer with a belt width of 400 mm and a working length of 1850 mm significantly increases the productivity of the modular fryer. It allows frying times to be set from just a few seconds up to an hour, thanks to a special drive with multiple modes for adjusting the conveyor movement speed.
The industrial conveyor fryer Oil Deep 400/1850/24, despite its compact dimensions, offers high productivity. You no longer need to select a fryer for each specific product - this fryer enables you to fry a wide range of products with varying frying times, expanding your product lineup on an industrial scale.
Products
|
|
|
|
|
|
|
|
Advantages
- Fast and highly efficient heating
- Reduction of oil carbonization in the heating sections due to the ability to individually regulate the temperature of each heating section
- Overheating protection: the presence of a safety system on each heating element
- Intensive frying by fully immersing the product in oil with the secondary upper conveyor
- Uniform frying: continuous operation ensures not only high productivity, but also a product of uniform and consistent quality
- Possibility of processing frozen products
- The presence of a "cold zone" to reduce the burning of small product particles and oil spoilage
- Highly robust unit due to the use of thick food-grade stainless steel AISI304
- Wide range of applications for a variety of products (up to 50 mm high)
- Quick and easy disassembly for cleaning and maintenance
Basic version
It consists of an extended version of a double-conveyor modular deep fryer on a supporting structure with a control panel.
Options
- Mobile loading conveyor
- Cooling conveyor
- Oil circulation system
- Automatic oil refill system
- Paddles for unloading round products
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 24
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
You might also like
The combination of the compact 400/1100/12 fryer with the secondary upper pressure conveyor, allows you to expand the variety of products that can be fried on it. It ensures uniform, high-quality frying of fresh and semi-finished products in small to medium scale, making it suitable for small-scale production, professional kitchens and street food businesses. The fryer fully submerges the product in oil throughout the whole frying process with the help of the second pressure conveyor that forces the product beneath the oil's surface.
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200°C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electric
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular SnackPro fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
- Heating: Electric
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
A hot oil filter for continuous industrial tabletop fryers allows you to quickly and effectively filter oil immediately after the frying process.
- Hot oil filtration - oil temperature up to 200 °C.
- Optional filter material - paper, stainless steel
- Filtration Area - 400Ñ…480 mm
- Material: Stainless steel
- Country of origin: Slovakia
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
- Material: Stainless steel
- Heating power, kW: 72
- Principle of operation: Continuous mode
- Working Area Width: 420 mm
An adjustable electric donut fryer with a continuous conveyor system is specially designed for small confectionery shops, pastry production and catering establishments. It is capable of frying a variety of products similar to donuts.
- Material: Stainless steel
- Heating power, kW: 12
- Country of origin: Slovakia
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor fryer and the paddle conveyor fryer – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or cooking boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
You can watch a video of the modular 400/1100/12 fryer on our Youtube channel.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method which helps to close down the pores of the product to prevent excessive oil absorption. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
Our continuous fryer is designed for frying cutlets, potatoes, meatballs, croquettes, fish, vegetables and many other products. Working volume up to l: 300 l.
- Material: Stainless steel
- Heating power, kW: 40
- Principle of operation: Continuous mode
- Oil volume: 300 l
- Voltage: 380-400V
We can help you choose the right continuous fryer suited for your needs.
- Productivity: nuts 400 kg/h
- Material: Stainless steel
- Heating power, kW: 30/ 60
- Operation mode: Automatic
- Principle of operation: Continuous mode
- Country of origin: EU
- Weight: 245 kg
- Working Area Width: 250 mm
- Oil volume: 100 l
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
- Material: Stainless steel
- Type of equipment: Individual machine
- Country of origin: Slovakia
We sell different types of deep fryers, for a price quote or for a free consultation, please contact us by sending a request.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: EU
- Voltage: 380-400V
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.Â
- Material: Stainless steel
- Principle of operation: Continuous mode
- Type of equipment: Individual machine
- Country of origin: Slovakia
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
- Material: Stainless steel
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 36
- Principle of operation: Continuous mode
- Country of origin: Slovakia
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Continuous mode
We offer different types of continuous fryers, let us know which product you wish to fry and we will help you choose the right fryer for your business.
- Heating: Electric
- Material: Stainless steel
- Principle of operation: Continuous mode
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
- Material: Stainless steel