Cook & Chill system C&C 250/175
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
The Cook&Chill kettle is a batch type cooking system designed to minimize heat consumption while maximizing the preservation of nutrients and vitamins in products processed at atmospheric pressure. The cooker can have 2 or 3 separate sections with a basket, equipped with an automatic lifting / unloading system.
The cooking and cooling system is used for cooking, blanching and frying the following products:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advantages:
- The modular design allows you to create a processing system that provides optimal thermal processing all products in the following modes: blanching - cooking - frying and pre-cooling - cooling. If necessary, it is also possible to wash the products in cold or warm water.
- Reinforced automatic lifting of baskets up to an angle of 110 degrees enables quick and convenient unloading of products with minimal losses, even when the basket is full.
- Effective hydrodynamic mixing without the need to install additional mixers.
- Thanks to the hydrodynamic mixing capabilities, the Normit C&C boiler is also suitable for thermal processing of products with a fragile surface structure.
- The standard basket cell size is 3 mm, it is possible to produce baskets with a size of up to 1 mm (option).
- Intensive cooling with water circulation inside the cooling section.
- Fast heating and a maximum heat transfer area to the product, which significantly reduces cooking time.
- Uniform processing ensures that the product inside the basket remains in motion due to hydro-permeation, resulting in even processing from all sides.
- Each section can be equipped with a system of circulation and filtration for the working fluid (option), which allows you to keep the quality of the water/oil stable during processing and reduces the probability of the product sticking to the inner walls or each other.
Basic version:
The device has a modular design. The first section consists of a working vessel with a mesh basket, it can be used for preliminary processing, or as a storage container for continuous operation. This module is usually implemented for 3-section kettles.
Second section - thermal processing: Depending on the required processing mode, it is possible to perform boiling/blanching/frying by substituting the working liquid with water/oil. This section for thermal processing is equipped with a basket lifting device, a direct steam injection heating source (electric heating - option).
The cooling section is equipped with a product basket and a basket lifting device. Depending on the type of processing, the cooling section can cool the product by immersing the basket filled up with the product in cold water after cooking/blanching. Alternatively, it can be equipped with a compressed air cooling system for surface cooling and blowing off excess oil after frying.
Technical requirements:
Source of compressed air 6-10 Bar for pneumatic lifting of the baskets (not included in the price)
Options:
- Electric heating
- System of circulation and filtration for each section
- Baskets with a mesh size of 1 mm
- Steam generator
- Compressor for compressed air "quiet"
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
You might also like
The electric cooker is intended for use in the food, hospital, catering industry, in large kitchens for making soups, broths, pasta, milk dishes, stewing meat, fish, vegetables, mushrooms, frozen or semi-prepared meals, heating or steaming. The equipment is not suitable for roasting or baking.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 18/ 24/ 30/ 36
- Principle of operation: Batch mode
- Type of equipment: Individual machine
- Volume: 100l/ 150l/ 200l/ 300l
Automatic cooker made for continuous batch production. Different types of food can be boiled, like pasta, rice, vegetables, meat etc. Options: direct gas, indirect steam boiling or direct electric.
Price depends on chosen option.
- Heating: Electric Gas Steam
- Material: Stainless steel
- Heating power, kW: 2x25
- Volume: 2x135l/ 2x220l
- Steam consumption, kg/h: 2x70/ 2x100
A universal cooking & cooling system for preparing large batches of food and subsequently cooling them down to preserve their structure.
Price depends on the selected options. For more information, please send us a request.
- Heating: Steam
- Material: Stainless steel
- Working volume: 700l
- Geometric volume: 1000 l
- Dimensions, mm: 3180x1860x1080
Price depends on the chosen option. Please send us a request.
- Heating: Electric Steam
- Material: Stainless steel
- Engine power, kW: 2,2
- Volume: 300l
- Dimensions, mm: 1070x1120x1040
If you need to cook the product at low temperatures, to better preserve the appearance and nutritional properties of the product, or to add components that are sensitive to heat, we recommend using the universal TiltCook boiler.
- Heating: Electric Steam
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 250l/ 300l
This premium cooking kettle is gas-fired and has a capacity of 120 liters. Ideal for preparing a wide variety of dishes.
- Heating: Gas
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 120l
- Working volume: 100
The price is set for the basic version of the vacuum evaporation unit with basic controls (mixer motor switch) and without additional options. The control unit is customized based on individual customer requirements. The pump is also selected separately depending on the product.
A compact vacuum evaporation unit that allows you to concentrate solutions, mixtures, and various products by evaporating the solvent. A modular version based on the basic version of the 110/100 vacuum reactor.
- Gravity mixing - 25% more efficient
- Reinforced agitator design with no blind spots
- Bottom ball valve with no dead zones
- Condensation and secondary vapor removal system
- Easy to disassemble mixing device
- Large heat exchange area
- Ability to measure and monitor condensate volume (optional)
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 220-230V
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
- Condensing capacity, l/h: 45-55
- Steam consumption, kg/h: up to 150
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
Vacuum evaporator with remote circulation using a heat exchanger is one of the most efficient evaporation methods. This evaporation system is suitable for boiling and concentrating heat-sensitive products such as milk, cream, etc.
- No mixing device required, the product has forced circulation!
- Modular system: possibility to choose the vacuum generator, power and heat exchanger type
- Inclined design and bottom valve for 100% product discharge without losses and blind spots
- Insulated upper hatch of the unit for heat retention and safety
- Tangential product inlet into the vacuum vessel for guaranteed evaporation in a thin layer
- Material: Stainless steel
- Volume: 50l/ 100l/ 300l
The kettle is designed for cooking qualitative jam, marmalade, confiture from different fruits, vegetables and berries. It's an ideal and affordable solution for cooking various products.
- Material: Stainless steel
- Heating power, kW: 9/ 12/ 18/ 24
- Principle of operation: Batch mode
- Volume: 80l/ 120 l/ 200l/ 300l
The multifunctional cooking and pasteurization kettle with manual tilting is a simple device designed for the entire jam production process: from cooking the fruit mixture to the subsequent pasteurization of finished products directly in jars. It allows you to prepare the product in a container and then, using an additional basket, pasteurize the filled jars without the need for any additional equipment.
- 6-stage regulation of the built-in heating allows you to set the optimal conditions for cooking the fruits and subsequent pasteurization without the risk of burning or loss of quality.
- The manual tilting mechanism with a three-stage adjustment and a maximum tilt angle of 110° ensures convenient emptying of the container and dosing of the finished product with virtually no losses.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 2,6 / 6,5
- Volume: 50l/ 100l
The vacuum cooking and concentration unit is designed for concentrating products at low temperatures (about 60 degrees) in a reactor with a discharged environment to preserve the color, nutritional value and useful natural substances in present in food products. Evaporation and concentration units are often used when cooking jams, sauces, as well as fruit or vegetable concentrates. The vacuum concentrator allows you to boil and concentrate heat-sensitive products without damaging or destroying their structure or proteins, such as milk.
- Inclined design - allows for gravity mixing, which is 40% more efficient than usual
- Quick and 100% emptying of the tank thanks to the inclined design with the mixer on
- Heating/cooling jacket (duplicator) for the working tank and bottom
- High hygiene standard - the output valve is located at the lowest hydraulic point of the reactor
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 300l/ 500l/ 875l
Universal cooking kettle with a built-in steam generator up to 0.5 bar, frame stirring device and an automatic tilt and unloading system is a convenient and safe solution for processing various liquid products in large volumes.
- Safe design with a jacket (duplicator) and outer casing with insulation
- Intensive steam heating through the jacket using the built-in electric steam generator
- Automatic multi-stage tilt and unloading system
- Frame stirring device for dissolving, mixing, kneading ingredients
- Unloading of the product into rolling carts is possible due to the offset tilted axis
- Heating: Mixed
- Material: Stainless steel
- Country of origin: Slovakia
- Total power, kW: 13,5
A versatile atmospheric kettle suitable for cooking various products, including jams, syrups, sauces, fruit and vegetable juices, and many others.
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 250l/ 300l
The electric cooker is intended for use in the food, hospital, catering industry, in large kitchens for making soups, broths, pasta, milk dishes, stewing meat, fish, vegetables, mushrooms, frozen or semi-prepared meals, heating or steaming. The equipment is not suitable for roasting or baking.
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 18/ 24/ 30/ 36
- Principle of operation: Batch mode
- Type of equipment: Individual machine
- Volume: 100l/ 150l/ 200l/ 300l
Price depends on the chosen option. Please send us a request.
- Heating: Electric Steam
- Material: Stainless steel
- Engine power, kW: 2,2
- Volume: 300l
- Dimensions, mm: 1070x1120x1040
This kettle with a radiator cooling system ranging from 30 to 500 liters is ready to cook according to the principle of a water bath.
- Material: Stainless steel
- Volume: 30l/ 60l/ 80l/ 120 l/ 200l/ 300l
- Voltage: 380-400V
This electric cooking pot has a volume of 60 liters and is used to prepare a large number of dishes. It is comfortable to use and easy to clean.
- Material: Stainless steel
- Volume: 60l/
- Voltage: 380-400V
This gas powered professional cooker is indispensable in professional kitchens. It allows you to easily prepare the most delicious soups, broths, sauces and creams.
- Heating: Gas
- Material: Stainless steel
- Working volume: 100l/ 150 l
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum vessel with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum cooking kettle, and a unit for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
We sell many different types of cooking equipment, with a mixer or without, tilting cookers, with capacities from 100 - 350 liters.
- Material: Stainless steel
- Country of origin: EU