Continuous deep fryer with double conveyors 400/1100/12
The combination of the compact 400/1100/12 fryer with the secondary upper pressure conveyor, allows you to expand the variety of products that can be fried on it. It ensures uniform, high-quality frying of fresh and semi-finished products in small to medium scale, making it suitable for small-scale production, professional kitchens and street food businesses. The fryer fully submerges the product in oil throughout the whole frying process with the help of the second pressure conveyor that forces the product beneath the oil's surface.
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
This combination of the basic fryer model and the secondary pressure conveyor module allows you to effectively fry foods with air bubbles or a high moisture content. Such products usually remain on the surface of oil during the frying process, which is not ideal for achieving high-quality, uniform frying results as the product needs to be submerged below the oil level. The product is strategically positioned between the lower and upper conveyors, remaining stationary and fully immersed in oil, where it undergoes frying for a predetermined duration. Following this, the fried snacks are unloaded from the fryer. The conveyor drive is synchronized to ensure both belts move at the same speed, preventing potential damage to the product.
This combination of the fryer with an additional upper conveyor module allows for uniform, quick, and effective frying for the following products:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advantages
- The height of the product can be up to 50 mm
- Reduced product loss and damage
- The speed for product advancement along the working bath is adjustable, and the frying time can be set from a few seconds all the way up to 50 minutes.
- Conveyor belt is made out of thin wire mesh made out of food grade stainless steel.
- Easy installation and disassembly
- Immersion thermometer for visual monitoring of the oil temperature
- High processing temperature – up to 200C
- An additional working surface at the entrance allows you to prepare the products before processing
- The fryer's compact dimensions make it easy to install on a tabletop work surface
- Safety thermostats on each heating element
The basic fryer as well as the module itself are made entirely out of food grade stainless steel, including the frame and the conveyor belts. The upper conveyor belt is made out of fine-mesh stainless mesh, the size of which is identical to the size of the base (lower) conveyor belt. The upper conveyor is easily fixed onto the lower conveyor with the help of a drive.
Operating principle
Some foods, with a high water content, tend to float while frying due to the steam produced when in contact with the thermal oil. To ensure high quality and even frying, it's necessary to forcefully immerse the products beneath the oil's surface.
The product is loaded onto the bottom conveyor, and prior to entering the frying zone, it is pressed by the upper conveyor belt along the entire width, it forcibly immerses and holds the product below the oil surface, moving along the entire working area at a given speed for subsequent unloading. The product, moving along entire length of the working area is fully immersed in oil, ensuring a consistent and even frying result. The frying time can be set from a few seconds to 50 minutes!
The maximum product height is up to 50 mm.
Other additional modules that expand the capabilities of the fryer:
- A conveyor with windmill shaped paddles for frying lightweight, fragile products such as thin french fries, chips, vegetable chips, extruded snacks and other processed foods that float in hot oil
- A work table out of food grade stainless steel
- Oil reservoir with a capacity of 75 liters* The reservoir can only be ordered together with the workbench, as a part of the order. *Oil volume +- 5 liters.
- Automatic hot oil circulation system** with filtration, suitable for pre-treatment of the product at the entrance to the fryers working area - a “waterfall†of hot oil to fry the product from above, used to close the pores of the product and prevent it sticking as much. **For the version with a work table and an oil reservoir
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
You might also like
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
The AISI 304 stainless steel oil drain system is suitable for use with most deep fryers. It allows you to filter the oil directly when draining it from the fryer.
- Material: Stainless steel
- Weight: 13,5
A set of additional paddles for transporting and unloading the product from the working area of ​​the universal 400/1100/12 fryer.
This continuous conveyor deep fryer is a reliable and versatile solution suitable for high-performance frying of a wide range of products by immersing them in hot oil.
- Universal application
- Quick transition for frying new types of products
- Possibility of using special frying modes
- Minimal amount of oil in the system
- Trouble-free oil filtration
- High oil exchange ratio
- High efficiency and productivity with compact design
- Manufactured to the highest quality standards using materials and components made in Europe.
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product†after frying
- Low carbonization of oil due to the cleaning feature after frying
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
Price depends on the chosen option. Please email sales@foodtechprocess.com
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
Automatic donut fryers are extremely efficient machines designed for easier production of doughnuts.Â
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
The extended version of the modular conveyor fryer with a large number of optional accessories, significantly expands the production capacity for deep-frying various products by increasing both the frying area and heating power.
- Frying time can be adjusted from several minutes up to an hour!
- Overheating safety sensors are installed on each heating element
- Compact support structure on a mobile support
- Fine-mesh conveyor grid allows for frying small and fragile products
- A large number of additional options in the form of automatic oil top-up system, loading conveyor, filtration system, cooling conveyor, etc.
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email at sales@foodtechprocess.comÂ
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 20l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.Â
For more information please email sales@foodtechprocess.com
Multifunctional pans function as a frying, cooking, and mixing device in one installation.
For more information on our automatic Wok-style frying pan with a built in mixer, please contact our sales department at sales@foodtechprocess.com
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@foodtechprocess.com
We offer different types of continuous fryers, let us know which product you wish to fry and we will help you choose the right fryer for your business.
For more information, contact us at sales@foodtechprocess.comÂ
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode












