Storage vessel with a duplicator and stirrer STM 300 L
This equipment is often used for temporary storage and transportation of liquid products, equipped with a specially shaped stirrer and heating / cooling "jacket".
The storage and transport tank is intended for use in industries such as pharmaceutical, chemical, food, cosmetic, etc.Â
The product can be loaded using a flexible pipeline through the upper manhole of the tank, or using a pump which can be offered optionally. The unit is equipped with a soft starter of the stirring device geared motor
Possible processes
- Indirect heating or cooling (duplicator up to 0,5 Bar)
- Storage
- Mixing
The set includes
- Storage tank vessel with heating or cooling jacket
- Specially shaped stirrer with an electric drive
- Temperature sensor with thermometer
Technical features
- Volume, L: 300
- Stirrer, KW: 0,25
- Material: AISI 304
- Voltage, Volt: 400
- Dimensions, mm: 1114,1304,1053
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Voltage: 380-400V
A cooking kettle and a vacuum mixer for periodic deaeration of products such as mayonnaise, ketchup, various sauces, creams, gels and pastes. It is one of the modifications of a vacuum reactor and a vacuum evaporator. The presence of a vacuum system allows you to create a vacuum after the cooking process and perform vacuuming (deaeration) to remove air bubbles with potential contaminants and obtain a product with a denser structure. Thanks to vacuuming, the product has an extended shelf life, since pathogens and microbes contained within are removed together with the air.
- Inclined design with gravity mixing, which is 30% more efficient than usual
- 100% emptying of the product after processing due to the bottom valve
- Easy to disassemble removable mixing device
- Possibility of connecting it to a CIP station for cleaning and washing
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 100l
- Total power, kW: 0,12
- Max vacuum: -0,8 Bar
The kettle is designed for cooking qualitative jam, marmalade, confiture from different fruits, vegetables and berries. It's an ideal and affordable solution for cooking various products.
- Material: Stainless steel
- Heating power, kW: 9/ 12/ 18/ 24
- Principle of operation: Batch mode
- Volume: 80l/ 120 l/ 200l/ 300l
The Economy series of the cooking kettles comprise a thick-walled stainless steel container with an electric mixer mounted on the quick-release upper housing. The installation allows you to mix and stir products during processing. The thick bottom of the pot allows it to be installed on all types of heating surfaces (gas, induction or electric stove).
The Economy version is recommended for use with low-viscosity liquid products; If processing more thick and viscous products is necessary, we offer the Premium version of the cooking kettle or the caramel & syrup cooking kettle for extra thick substances.
- Sandwich bottom (multilayer) for use on all types of hobs, including induction
- Quick release lid with an electric stirrer
- Safety grid under the upper hull hatch - safe handling when stirring
- Possibility of visual inspection through the safety grid during processing
- Safe loading of components even during mixing
- Material: Stainless steel
- Engine power, kW: 0,12
- Volume: 30l/ 50l/ 100l/ 150l
- Voltage: 220-230V
- Diameter, mm: 400/ 500/ 600
The price is set for the basic version of the installation without additional equipment.
The vacuum homogenizer is designed for a wide range of processes such as for the production of mayonnaise, ketchup, various sauces, confectionery pastes and fillings, liquid or paste like products with a homogeneous structure. It is also suitable for the production of various creams, gels, shampoos and other products in the cosmetic industry.
- Built-in Ultra Shear bottom homogenizer
- Mixing device with movable scrapers
- Tilting version for easy unloading
- Wide range of applications
- Entirely made of food grade stainless steel AISI304/ AISI316 - option
- Compact design
- Lots of additional options to choose from
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 20l/ 50l
- Total power, kW: 2,3/ 2,4
- Voltage: 220-230V
- Max vacuum: -0,8 Bar
The vacuum cooking and concentration unit is designed for concentrating products at low temperatures (about 60 degrees) in a reactor with a discharged environment to preserve the color, nutritional value and useful natural substances in present in food products. Evaporation and concentration units are often used when cooking jams, sauces, as well as fruit or vegetable concentrates. The vacuum concentrator allows you to boil and concentrate heat-sensitive products without damaging or destroying their structure or proteins, such as milk.
- Inclined design - allows for gravity mixing, which is 40% more efficient than usual
- Quick and 100% emptying of the tank thanks to the inclined design with the mixer on
- Heating/cooling jacket (duplicator) for the working tank and bottom
- High hygiene standard - the output valve is located at the lowest hydraulic point of the reactor
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 300l/ 500l/ 875l
The vacuum homogenizer is designed for whipping mayonnaise, ketchup, various sauces, confectionery pastes and fillings, condensed milk, jams and marmalades, canned goods, as well as similar liquid or pasty products with a homogeneous structure.
- Homogenizer in an external circulation loop
- Built-in vacuum generation and retention system
- Modular design with numerous options
- Possibility of automatic dosing of ingredients (optional)
- No additional pump required for loading/unloading
- Automatic top cover lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 650l
- Total power, kW: 13,5
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
- Material: Stainless steel
- Principle of operation: Batch mode
The vacuum homogenizer with an inclined design is designed for processing and manufacturing a wide range of liquid, pasty and viscous products with different requirements for their production conditions and other products including those with a high viscosity.
- Material: Stainless steel
- Engine power, kW: 1,5 KW
- Principle of operation: Batch mode
- Country of origin: Slovakia
The atmospheric tank with an inclined design is used for mixing, stirring, and dissolving various products. By supplying a thermal carrier to the unit’s jacket (duplicator) from an external source, thermal processing such as heating or cooling can occur (i.e. heating or cooling from an external coolant source with an inlet pressure of up to 0.5 bar). These units are widely utilized in the food and cosmetic industries.
- Inclined design: 50% more efficient mixing
- Due to the inclination angle of the working tank, rapid and complete (100%) emptying is achieved.
- Efficient heat transfer through the heating/cooling jacket
- No dead zones during mixing!
- Modular system with a wide range of additional options
- Material: Stainless steel
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: Slovakia
- Working volume: 100l/ 200l/ 300l/ 450l/ 600l/ 900l
The price is indicated for the basic version of the vacuum reactor without additional options, the final cost depends on the modifications
The vacuum homogenizer is an ideal solution for the production of food, for example mayonnaise, it is also suitable for the cosmetics industry - the production of toothpaste. This model of the homogenizer is based on a vacuum reactor with an external homogenizer and an external circulation circuit, the parameters of which are selected as options.
- Tilted design - 25% more efficient mixing
- Easily disassembled reinforced frame mixer, for thick and viscous products
- Jacket for the coolant around the bottom and walls of the working reactor
- The vacuum reactor can withstand a vacuum up to -0.8 Bar
- A large number of options to choose from to suit various requirements
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 300l/ 650l
- Total power, kW: 0,55
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
These storage tanks are intended for fruit and vegetable juice storage and treatment. Price depends on your production process and the product.
For more information, send us a request.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 750 1000l/ 1500l 2000 2600 l/ 3000 4000 l/ 5000 l
Tilting bratt pans with mixer are frying the product with continuous stirring. Designed for catering industry, school kitchens, restaurants and food industry. Variants of heating systems: direct electric and direct gas. Capacity: 150, 200 or 300l.
- Material: Stainless steel
- Engine power, kW: 0,75
- Heating power, kW: 42
- Principle of operation: Batch mode
- Type of the equipment: Individual machine
- Country of origin: EU
- Volume: 150l/ 200l/ 300l
- Voltage: 380-400V
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
The price is indicated for the basic version of the set of equipment with a homogenizer
The equipment for the production of ice cream mixtures is based on a universal vacuum reactor with a coolant jacket and a multi-stage dispersant/homogenizer in an external circulation loop.
- Special type of a stirring device for easy disassembly and cleaning
- Processing with minimal product loss
- The bottom outlet valve is included in the basic version of the installation
- Multi-stage disperser for intensive wetting and homogenization of the flowing mixture
- External circulation circuit with a three-way valve for operation/washing of the equipment
- Reinforced agitator drive for thick and viscous mixtures
- Built-in vacuum pump
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Total power, kW: 3
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The price is set for the basic version of the reactor without additional options and the control panel
The vacuum vessel with a coolant duplicator and a mixing device is a universal solution for processing various products at sub-atmospheric pressure. Based on this simple device, you can select and modulate it into complex installations such as a vacuum evaporator, a vacuum cooking kettle, and a unit for the production of cream honey.
- Sloped Design - Gravity Mixing
- Bottom valve DN40 included in the basic version
- Small-volume duplicator - low costs for coolant heating/cooling
- Modular system: customization of the equipment and its functionalities by ordering additional options
- An easy to disassemble mixing device
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar