Industrial Cook & Chill System C&C 250/175

Commercial Cooking Kettle with Cooling 250L

Industrial Cooking Kettle for Food Processing

Stainless Steel Industrial Cooking Kettle

Food Processing Cooking Kettle C&C 250/175

Cook & Chill system C&C 250/175

€0.00

The stated price does not include the steam generator

The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).

Suitable for cooking small-sized products
Fast and intense heating due to direct steam injection
Intensive hydro-stirring
Automatic basket lifting system

The Cook&Chill kettle is a batch type cooking system designed to minimize heat consumption while maximizing the preservation of nutrients and vitamins in products processed at atmospheric pressure. The cooker can have 2 or 3 separate sections with a basket, equipped with an automatic lifting / unloading system.

The cooking and cooling system is used for cooking, blanching and frying the following products:

beans	peas	soy	rice	chickpeas
pasta	squid	shrimp	crab	mussels
octopus	fish	meat	lentils	vegetables

Advantages:

The modular design allows you to create a processing system that provides optimal thermal processing all products in the following modes: blanching - cooking - frying and pre-cooling - cooling. If necessary, it is also possible to wash the products in cold or warm water.
Reinforced automatic lifting of baskets up to an angle of 110 degrees enables quick and convenient unloading of products with minimal losses, even when the basket is full.
Effective hydrodynamic mixing without the need to install additional mixers.
Thanks to the hydrodynamic mixing capabilities, the Normit C&C boiler is also suitable for thermal processing of products with a fragile surface structure.
The standard basket cell size is 3 mm, it is possible to produce baskets with a size of up to 1 mm (option).
Intensive cooling with water circulation inside the cooling section.
Fast heating and a maximum heat transfer area to the product, which significantly reduces cooking time.
Uniform processing ensures that the product inside the basket remains in motion due to hydro-permeation, resulting in even processing from all sides.
Each section can be equipped with a system of circulation and filtration for the working fluid (option), which allows you to keep the quality of the water/oil stable during processing and reduces the probability of the product sticking to the inner walls or each other.

Basic version:

The device has a modular design. The first section consists of a working vessel with a mesh basket, it can be used for preliminary processing, or as a storage container for continuous operation. This module is usually implemented for 3-section kettles.

Second section - thermal processing: Depending on the required processing mode, it is possible to perform boiling/blanching/frying by substituting the working liquid with water/oil. This section for thermal processing is equipped with a basket lifting device, a direct steam injection heating source (electric heating - option).

The cooling section is equipped with a product basket and a basket lifting device. Depending on the type of processing, the cooling section can cool the product by immersing the basket filled up with the product in cold water after cooking/blanching. Alternatively, it can be equipped with a compressed air cooling system for surface cooling and blowing off excess oil after frying.

Technical requirements:

Source of compressed air 6-10 Bar for pneumatic lifting of the baskets (not included in the price)

Options: