Double Z sigma arm mixer
The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.
- Double Z-shaped blade
- Very high shear force
- Minimum gap between z blades and the working container
- Independent electric drive for each blade
- Electric tilting for automatic unloading up to 180 degrees
- The mixer is made entirely out of food grade stainless steel AISI304
- Possibility to choose the side of tilting and unloading
The multifunctional Z-shape double blade mixer is widely used in various industries: food, chemical, pharmaceutical, cosmetics and many others, where it is necessary to mix complex, heavy, thick and viscous products with a high degree of homogenization. Mainly, double z mixers are used for kneading thick, stiff dough in the confectionery industry as well as in the production of raw, muesli and protein bars, where it is necessary to obtain a thick, homogeneous mixture of cereals, honey, nuts, dried fruits, fondant and so on.
The Z blade mixer can be used to process and produce products such as:
|
|
|
|
|
|
|
|
|
|
Advantages:
- Independent drive for each Z-shaped blade with the ability to adjust the speed and direction of rotation. For each type of product it is possible to choose its own mixing diagram; each Z blade shaft can rotate in its own direction and at its own speed.
- The ability to choose the side of product unloading, the control system includes both tilting options up to 180 degrees.
- The control is located directly on the mixer; the basic version provides a semi-automat (semi-automatic control panel) with the possibility of individual settings for each system. As an option, an HMI touch screen with semi-automatic control can be installed on the side of the control panel. The HMI panel can be equipped with a memory module for creating and saving recipes.
- The special shape of the working container in the form of a small Greek letter ω allows for a minimum gap between the walls and the edge of the mixing device blade for highly efficient mixing, including bulk and powder products.
- High degree of safety: lid opening sensors and a working container position sensor, which guarantee safety for operator maintenance.
- Massive supporting structure for the stability of the mixer during operation and reduction of vibration.
- The mixer is made entirely out of food grade stainless steel AISI304; a stainless steel control panel can also be installed as an option.
- Automatic tilting system for the working container, depending on the volume and model, the tilt drive can be electric or hydraulic. Tilting is performed using a joystick mounted on the control panel, up to a maximum tilt angle of 180 degrees.
- Highly economical: mixers with two Z-shaped blades are the optimal choice for both small production and industrial-scale production, as they allow large volumes of product to be efficiently processed in a relatively small area.
- Hygienic design, easy maintenance and cleaning of equipment.
Basic version
The modification of the basic configuration includes a working container suspended on a supporting structure, inside of which special 2 Z-shaped blades, and a mixing device with an independent adjustable electric drive are installed. The working container is equipped with a lid and a control panel. The basic version includes a semi-automatic control panel (semi-automat), which allows you to adjust the direction, speed of rotation of the shafts with z-shaped blades, and automatically tilt the working bowl. In the basic configuration, tilting and unloading can be done in both directions.
Models
| Geometric volume, l   | Working volume, l      | Maximum load, kg         |
| 70 | 50 | 36-50 |
| 140 | 100 | 70 |
| 460 | 300 | 200 |
| 700 | 470 | 250 |
Options
- Control panel with a HMI panel (touch screen)
- Memory module with the ability to save recipes (when ordering the remote control option with an HMI panel)
- Control panel (electrical cabinet) made out of stainless steel
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Voltage: 380-400V
You might also like
The price depends on the selected modifications and specific options
The plow mixer is often used in the food, pharmaceutical, and chemical industries for mixing and saturating powder products with liquid media in order to obtain a high-quality mixture.
- High intensity and quality of mixing, stirring
- Short mixing time and a high productivity
- Guaranteed repeatability and reproducibility of the product batches
- Gentle handling of the product due to the mixing device's special plows
- A large number of options to choose from to fit a specific product type
- Air Purge Seals
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 700l/ 1200l/ 1800l
- Voltage: 380-400V
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.
Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:
ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height
ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height
- It is possible to use standard food containers ranging from 20-65 liters
- Easy control via a frequency converter as a stand-alone control panel
- Safe operation thanks to a roll bar with a position sensor
- Engine power, kW: 0,37/ 0,55/ 1,1
The NDM + drum mixer is designed for thorough mixing while retaining the structure of loose products without dead zones and with relatively low consumption and short mixing time. Made for mixing products such as coffee, tea, nutrients and supplements, baby food and many others.
For additional information, please contact us at sales@foodtechprocess.com
Homogenizer for the production of whipped cream, ice cream, and much more. It allows you to obtain stable liquid emulsions of food mixtures.
- The homogenizer can be installed directly into the container with the product
- High productivity - in just 8 minutes, it is possible to whip up to 60 liters of milk mixture
- The peripheral speed of the knives is 16 m/s
- Engine power, kW: 0,37/ 2,2
- Voltage: 380-400V
A professional mixer for the production of mayonnaise, sauces, soups and other homogenized products. The price depends on your production capacity, as well as the technological requirements.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 200l
- Total power, kW: 6
The twinscrew mixer with two horizontal shafts is designed for intensive mixing and kneading dough as well as chocolate, pralines and other similar products with medium or high viscosity.
For a price quote, send us an email to sales@foodtechprocess.com
The mixer is designed for mixing large quantities of dough as well as meat mixtures.Â
The price is indicated without the frequency converter
A twin-screw mixer for fast and intensive mixing, stirring of bulk solid products, such as granules, muesli with various powder additives.
- The mixing blades carefully move while thoroughly mixing the product
- The mixing mode allows you to move the product cyclically in a circle
- High mixing efficiency due to the counter-movement of the 2 shafts
- Compact design
- Possibility to install scrapers on each blade (optional)
- Reinforced drive, can be used for products saturated with moisture as well
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Volume: 500l
- Total power, kW: 3
The vacuum homogenizer with an inclined design is designed for processing and manufacturing a wide range of liquid, pasty and viscous products with different requirements for their production conditions and other products including those with a high viscosity.
For additional information, please contact us at sales@foodtechprocess.com
The coating machine is designed for uniform application, impregnation of oil and fat mixture, dyes and flavors, enzymes, vitamins and other additives, various products with a high level of hygiene.
For more information, send us an email at sales@foodtechprocess.com
The periodic drum coating/seasoning machine is designed to saturate and infuse a diverse range of products with flavorful aromas, vitamins, and various taste additives. It is utilized in the production of snacks, chips, cereals, and nuts, offering a wide array of flavor enhancements.
- Mechanical system for tilting the working bowl with fixation points in intermediate positions
- Special perforated blades for gentle product turning
- Powerful drum rotation drive
- Entirely made out of food grade stainless steel AISI304
- Easy control via an inverter (optional): speed control and reverse
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Total power, kW: 0,55
Equipment for mixing multi-component mixtures of products, such as vegetable salads with various dressings, including thick and viscous ones like mayonnaise, thick sour cream and other similar sauces.
- Hydraulic tilting system is included in the basic version
- The controls are located directly on the frame supporting structure
- Eccentrically offset working shaft for rotating/tilting the working tank
- Low loading height
- The installation is made entirely out of food grade stainless steel
- Material: Stainless steel
- Operation mode: Mixed
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 600l/ 1000l
The honey creaming machine is produced in various capacities with the possibility of loading from 30 to 225 kg of honey, so every beekeeper can choose the model that suits him. After processing, honey acquires a creamy structure. The creaming process is a method of crystallizing honey using a sample – seed (creamed honey), carried out through stirring.
- Compact design
- Easy to operate and maintain
- Connection - 220-230 Volts
- Container and mixing device made out of stainless steel
- Material: Stainless steel
- Engine power, kW: 0,18/ 0,25
- Voltage: 220-230V
- Loading, kg: 30/ 75/ 150/ 225
The mixers are made up of a double-walled cylindrical stainless steel vessel with cavity, with drain hole and 50 cm diameter butterfly valve. The cavity is filled with water which is heated by an electric resistance thermostat. The honey is mixed by blades with a marine propeller profile, adjustable in height along an oblique shaft.Â
For a price quote, send us an email to sales@foodtechprocess.comÂ
Mixers are carefully designed, constructed and tested to handle a variety of industrial applications that require mixing, dispersive mixing, distributive mixing and more.
For more information, please contact our sales department at sales@foodtechprocess.com
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum temperature capability of 60 °C.
For a price quote, send us an email at sales@foodtechprocess.comÂ
Running of various production processes such as cutting, mixing, crushing, refining and emulsifying different types of product in a single unit.
Price depends on the chosen option. Please email sales@foodtechprocess.com
The Economy series of the cooking kettles comprise a thick-walled stainless steel container with an electric mixer mounted on the quick-release upper housing. The installation allows you to mix and stir products during processing. The thick bottom of the pot allows it to be installed on all types of heating surfaces (gas, induction or electric stove).
The Economy version is recommended for use with mostly liquid products; If processing thick and viscous products is necessary, we offer the Premium version of the cooking kettle.
- Sandwich bottom (multilayer) for use on all types of hobs, including induction
- Quick release lid with an electric stirrer
- Safety grid under the upper hull hatch - safe handling when stirring
- Possibility of visual inspection through the safety grid during processing
- Safe loading of components even during mixing
- Material: Stainless steel
- Engine power, kW: 0,12
- Volume: 20l/ 50l/ 100l/ 150l
- Voltage: 220-230V
Highly efficient production of a high viscosity pharmaceutical and cosmetic products.
For a price quote, send us an email to sales@foodtechprocess.com