Fryer for crispy onions with a deoiling centrifuge
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product†after frying
- Low carbonization of oil due to the cleaning feature after frying
An atmospheric electric immersion fryer with a centrifugal system for removing excess oil is used both for laboratory purposes in large enterprises and small food processing businesses that work with various products in smaller volumes.
A deep fryer with a system for removing excess oil is the optimal solution for frying sliced or chopped products and small raw materials such as:
|
|
|
|
|
|
|
Advantages:
- The installation allows you to process products with a fragile structure and a small size; the basket has sections inside which the product is evenly fried.
- Constant circulation of oil through the built-in filtration system extends the life of the oil and reduces its carbonization.
- After a quick frying in hot oil, the product closes its pores, ensuring maximum retention of the beneficial substances contained inside and preventing oversaturation with oil.
- The centrifuge separator allows you to obtain a 'dry' product after frying with a minimal oil content!
Basic version
The installation consists of a frying container with an oil heating and storage bath, a built-in electrically driven centrifuge, a special pump for hot oil and a piping system connecting the frying section with the heating section. The heating control is located directly on the units body; the centrifuge rotation speed can be adjusted through the inverter. The basic version includes one sectional basket with a lid.
Principle of operation
A special feature of the installation is the ability to remove residual oil from the product, obtaining a dry product at the output. To achieve this, a special system that spins the basket with the product after draining the oil is used, where due to the centrifugal force, drops of oil located on the surface of the product are sprayed onto the walls of the working container and flow through the drain hole into the container for storing and heating the oil.
Options:
- Additional basket
- Basket lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
You might also like
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
- Productivity: 160 kg/15 min
- Material: Stainless steel
- Heating power, kW: 90/ 110/ 180
- Country of origin: Slovakia
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 20l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor and the paddle conveyor – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
An adjustable electric donut fryer with a continuous conveyor system is specially designed for small confectionery shops, pastry production and catering establishments. It is capable of frying a variety of products similar to donuts.
- Material: Stainless steel
- Heating power, kW: 12
- Country of origin: Slovakia
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The continuous production line for deep-frying and the subsequent cooling of semi-finished products includes:
- modular deep fryer with the option of choosing the conveyor type: a secondary conveyor for forced immersion of the product in oil or a conveyor with paddles for frying light floating products, such as chips;
- stainless steel table under the deep fryer with the option of installing an oil container and an oil filtration system inside it;
- cooling conveyor for removing excess oil and surface cooling of the product after frying it in the deep fryer.
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
- Material: Stainless steel
- Heating power, kW: 72
- Principle of operation: Continuous mode
- Working Area Width: 420 mm
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
- Material: Stainless steel
- Operation mode: Semi-automatic
- Principle of operation: Continuous mode
The stated price does not include the steam generator
The unique sectional cooking kettle is intended for high-performance cooking/blanching/frying of a wide range of products with subsequent cooling to avoid damaging their structure. An essential part of this technology is the efficient cooling section, necessary for halting the cooking process after unloading. This function is also necessary when processing vegetables to the "aldente" state, when vegetables retain their structure and natural color after thermal treatment. This model provides heating by direct injection of purified steam into the heating section (steam generator - option).
- Suitable for cooking small-sized products
- Fast and intense heating due to direct steam injection
- Intensive hydro-stirring
- Automatic basket lifting system
- Material: Stainless steel
- Country of origin: Slovakia
- Volume: 2x250l/ 3x250l
- Voltage: 380-400V
- Working volume: 2x175l/ 3x175l
We offer different types of continuous fryers, let us know which product you wish to fry and we will help you choose the right fryer for your business.
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
A vacuum frying unit designed for frying vegetables and other snacks at low temperatures, thus making them healthier and less saturated with oil.
- Productivity: 160 kg/15 min
- Material: Stainless steel
- Heating power, kW: 90/ 110/ 180
- Country of origin: Slovakia
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
- Material: Stainless steel
The extended version of the modular conveyor fryer with a large number of optional accessories, significantly expands the production capacity for deep-frying various products by increasing both the frying area and heating power.
- Frying time can be adjusted from several minutes up to an hour!
- Overheating safety sensors are installed on each heating element
- Compact support structure on a mobile support
- Fine-mesh conveyor grid allows for frying small and fragile products
- A large number of additional options in the form of automatic oil top-up system, loading conveyor, filtration system, cooling conveyor, etc.
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
- Material: Stainless steel
The automatic donut forming and frying machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Material: Stainless steel
- Principle of operation: Continuous mode
- Weight: 40
- Total power, kW: 3
- Voltage: 220-230V
- Dimensions, mm: 965 x 330 x 650
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
- Material: Stainless steel
- Type of the equipment: Individual machine
- Country of origin: Slovakia
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 36
- Principle of operation: Continuous mode
- Country of origin: Slovakia
Production line for vegetarian vegetable-based formed or molded products such as falafel. The line is based on the classical method of producing semi-finished products for their subsequent freezing and packaging.
- Compact line suitable for both professional kitchens and industrial production.
- Fully automatic operation with minimal manual labor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Voltage: 380-400V