Air cooling conveyor M 400/1000
The modular cooling conveyor is produced as a standard tabletop version with a section length of 1000 mm; in addition to it, you can order a stainless table or a frame supporting structure. The air cooling conveyor can be sectionally increased in length by the required number of sections.
- Compact, easy to install on any work surface
- Features a fine-grained stainless steel mesh for high temperatures and small-sized products
- Easily combined in line with a tabletop fryer 400/1100/12
- Easy maintenance and cleaning
An air cooling conveyor is used to remove excess fat from the product, thereby stopping the frying of the product and allowing for surface cooling. This cooling system is a necessary phase after frying the product in a deep fryer and before further processing/packing.
The cooling conveyor is suitable for use after the continuous deep-frying of various products, both in a professional kitchen and in small scale food production of various semi-finished products, such as:
|
|
|
|
|
|
|
And many other products that can be processed on continuous conveyor fryers with a width of 400 mm.
Advantages
- Modular system, you can choose the working length depending on the specific product and the required degree of cooling that it has to undergo.
- Can be used as part of a production line, 100% compatible with our compact modular 400/1100/12 fryer.
- Several installation options: desktop version, on an independent movable frame, or on a mobile table mounted on a wheeled support.
- Simple and easy cleaning is facilitated by a tray installed along the entire length of the conveyor, designed to collect excess oil after blowing; it can be easily removed for washing.
- The special arrangement of the fans allows air to be directed both above the product and below the mesh, blowing it from all sides.
- The stainless steel mesh conveyor does not obstruct air distribution ensuring that the residual oil flows easily and quickly through the perforated belt into the oil tray located underneath.
Basic version
It consists of a conveyor with a fine mesh made out of stainless steel with an electric drive, a bath along the entire length of the conveyor, an air knife at the product inlet and several fans evenly spaced along the entire length of the conveyor.
Options
- Stainless steel table
- Frame structure
- Table with caster support
- Caster support for the frame structure
- Frequency converter for adjusting the conveyor speed
- Modular conveyor length system, the possibility of increasing it in sections
- An air knife at the inlet to effectively blow away residual oil from the surface of the product. This option requires a compressed air source with a pressure of 6-12 bar, 300 l/min.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
You might also like
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor fryer and the paddle conveyor fryer – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular SnackPro fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The oil-free four-cylinder piston compressor is the ideal solution for those who value both performance and silence.
- Equipped with two twin-piston units with separate engines
- Four air filters
- Mechanical pressure switch
- Quiet operation (at least 25% quieter than traditional compressors)
- Carrying handle and mobile wheel support
- Principle of operation: Continuous mode
- Total power, kW: 1,5
- Voltage: 220-230V
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
- Volume: 120 l/ 300l
- Voltage: 380-400V
The NWT PLUS chillers have a compact design. They take little space and are very easy to install and to start. The units are mobile on wheels. We offer different capacities.
- Heating: integrated
- Voltage: 380-400V
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C.
For more information, send us an email to sales@normit.comÂ
- Volume: 18 l/ 30l
- Voltage: 220-230V
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
- Principle of operation: Continuous mode
- Cooling performance l/h: 100 / 200 l/ 300
An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Voltage: 380-400V
The AS series chillers belong to the top professional cooling devices for quick beverages' chilling in restaurants, cafes, catering industry facilities, and pubs. The chiller is suitable for cooling water, spark or soft drinks, beer, wine, strong alcohol drinks, and others.
- Principle of operation: Continuous mode
- Country of origin: EU
- Cooling performance l/h: 160 l/h / 200 l/h
Lowering the temperature and humidity protects the product even without chemical treatment. The device is also used for continuous air cooling after heat treatment.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
Cooling tunnel with a length of 15.2 meters. The standard design consists of 13 sections with removable top. For more information, send us a request.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 400 mm
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.
The cooling tank is designed for storing milk and other beverages.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: EU
The rotary drum cooler is designed for efficient pre-cooling, stopping the cooking process, and cooling of boiled, blanched, fried, baked, or thermally processed foods. The rotating perforated drum ensures uniform cooling together with the additional water supply.
- Uniform cooling
- Adjustable drum speed
- Made entirely out of stainless steel
- Suitable for a wide range of food products
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 1,1
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
- Material: Stainless steel
- Principle of operation: Batch mode
This multi layer belt dryer with integrated cooling system works as a dryer and cooler in one installation.
- Material: Stainless steel
- Principle of operation: Continuous mode
The vacuum diffusion cooling unit is a multifunctional device not only for vegan processors.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia