Cooling tank MTL
The cooling tank is designed for storing milk and other beverages.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The device is a free-standing horizontal tank of cylindrical shape, the inner surface of the device is smooth, the angles are rounded, the welds are perfectly polished. The device includes adjustable feet for uneven floors.
The bottom is designed to ensure complete drainage of the tank. The design of the evapo
rator plates prevents the milk from freezing even with a small amount of milk.
Pressure tests of the device were performed at 60 bar.
Functional pressure: 30 BAR. Fine insulation made of polyurethane foam friendly to the environment
- The device contains a mixing system with a SIREM motor - three-phase mixing blades with a speed of 21-25 rpm without joints for MPP
- Mixing motors are designed for easy cleaning
- The inclination of the evaporator and the milk outlet from the milk cooling tank according to the international standard (ISO 5708).
- Stainless steel dipstick and standard calibration chart.
- Flap closure made of stainless steel DN50),
- PVC lid and stainless steel chain
- Manhole Ø500 mm
- Stainless steel ladder
- Washing pipe Ø25 mm (recommended instead of spray heads as the head becomes clogged after some)
CONDENSING UNIT:
Compressor of the closed type condensing unit, the type of coolant is completely ecological. Also included is a solenoid valve, voltage and phase regulator (L1-L2-L3) to protect the electrical circuits of the tank against voltage fluctuations, high-pressure and low-pressure switches
TYPE OF INSULATION: INTERVOL RFN-24.
Two-component system made of rigid polyurethane foam. The blowing agent used is a mixture of HFCs. Density: 40 kg / m3 (DIN53420). Compressive strength: 20 kPa (DIN53421). Thermal conductivity, 24 ° C: 0 023 W / mK (DIN18164). Stainless steel dipstick(AISI 304) for easy and direct reading of volume in mm. Standard calibration chart
An option with a standard automatic control panel is available
You might also like
The Milk Cooler has a simple design, which allows for easy and safe operation. it meets the requirements of all dairy production facilities.
Cooling tunnel with a length of 15.2 meters. The standard design consists of 13 sections with removable top. For more information, send us a request.Â
The KWS mixing vessel is engineered for versatile operations, including heating, cooling, and mixing of liquid products, with a maximum temperature capability of 60 °C.
For a price quote, send us an email at sales@foodtechprocess.comÂ
The cost is indicated without the control panel, which can be selected and offered separately
A versatile cooking system, featuring an inclined reactor and a frame mixing device, is designed for processing a diverse range of products through methods such as cooking, boiling, and concentrating at atmospheric pressure. This system is commonly used for the production of syrups, jams, confiture, and honey processing.
- Slanted design with gravity mixing - 25% more efficient!
- External decorative casing made out of polished stainless steel with insulation
- Jacket for the bottom and the walls of the working container along the entire height
- Lid opening sensor for safe operation
- Scrapers are already included in the basic version of the installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 300l/ 430l/ 600l/ 1000l
- Voltage: 220-230V 380-400V
Atmospheric mixing tank with a duplicator for heating/cooling is designed for preparing, mixing and storing of liquid, gel products.Â
For more information, send us an email to sales@foodtechprocess.com
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 300l/ 430l/ 600l/ 1000l/ 1500l
16 other products in the same category:
Milk cooler tank designed for cooling milk and other dairy products. The tank is available in 13 different capacities, covering a range from 50 liters all the way up to 2,500 liters, capable of meeting the needs of all dairy & cheese production facilities. We offer 2 or 4 milking options. Prices are displayed for the milk cooling tank with 4 milking.
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities. Should you have any questions, email us at sales@foodtechprocess.com
The NWT PLUS chillers have a compact design. They take little space and are very easy to install and to start. The units are mobile on wheels. We offer different capacities. For more information, email us at sales@foodtechprocess.com
The cooling units have a compact design. They are space-saving and easy to assemble. The chiller in standard version can work at water outlet temperatures from +10°C to +25°C. For more information, send us an email to sales@normit.comÂ
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air coole/ heater contains. 4 caster wheels make it easy to move the unit.
For more information about the machine contact sales department sales@foodtechprocess.com
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
For more information, send us an email at sales@foodtechprocess.com
Cooling tunnel with a length of 15.2 meters. The standard design consists of 13 sections with removable top. For more information, send us a request.Â
The vacuum bread cooler is well-suited for application in small bakeries or as a laboratory unit in industrial enterprises. This enables the post-baking of bread under vacuum conditions, influencing both its shape and structure.
- Built-in deep vacuum system
- Built-in vapor removal and condensation system
- Built-in refrigeration system
- The chamber is designed for 3 gastro containers size GN 1/1, or pallets: 400x600/530x325 mm
- Compact and mobile installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 130l
- Voltage: 380-400V
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
For additional information, please contact us at sales@foodtechprocess.com
The Milk Cooler has a simple design, which allows for easy and safe operation. it meets the requirements of all dairy production facilities.
An air cooling conveyor is used to rapidly cool products in food processing industries by circulating cool air over them as they move along a conveyor belt. This efficient cooling process helps preserve product quality and reduce the time between processing stages, facilitating smoother production workflows.
For a price quote or a free consultation, send us an email to sales@foodtechprocess.com
Fixed cooling unit wit different capacities from 67 kW up to 226 kW. Unit are solid and ensure long-life base operation.
For more information about the chiller, please contact our sales department at sales@foodtechprocess.com
Lowering the temperature and humidity protects the product even without chemical treatment. The device is also used for continuous air cooling after heat treatment.
For more information about the cooler, contact our sales department at sales@foodtechprocess.com
The AS series chillers belong to the top professional cooling devices for quick beverages' chilling in restaurants, cafes, catering industry facilities, and pubs. The chiller is suitable for cooling water, spark or soft drinks, beer, wine, strong alcohol drinks, and others.
For more information about this product, email us at sales@foodtechprocess.com
