Continuous Oil Pouring Fryer
The series of Continuous Fryers Pour Oil is the boom in the market of frying and roasting equipment. The new construction designed by our engineers, based on existing practical experience in the production and use of conveyor fryers, provides the best example of environmental friendliness.
For more information please email sales@foodtechprocess.com
The Fryers from Pour Oil series are using the lowest oil volume in the system, which significantly reduces the manufacturer’s costs associated with replacing and recycling waste oil.
The high efficiency of oil reduction, its intense circulation, and constant filtration ensure an unbeatable quality of the fried product while retaining all its important properties.
Examples of applications
- Chicken thighs and wings
- Hamburgers
- Sliced rings of eggplants, zucchini
- Nuggets
- Croutons
- And others
Methods of roasting
The Fryers use a hot oil baking process and are ideal for frying meat, fish, vegetable and pasta products with a hard or fragile structure, wrapped or not wrapped. High heat exchange indicators ensure the efficiency of roasting as if the product was constantly stirred in hot oil. At the customer’s request, it is possible to install a single or multiple product turn-over sections.
Pouring of hot oil provides results comparable to hot oil immersion and is effectively used for roasting large pieces of meat and fish products for which quality frying is necessary.
The hot oil produces a film on all sides of each piece of product, its intense circulation between the product and the heating source ensures that a uniform set temperature is maintained throughout the frying surface. The oil film is also formed on the mesh conveyor under the product. Due to the minimum time of oil transition from the heat source to the product, the oil does not overheat.
Always pure oil - a guarantee high-quality of a finished product.
The whole volume of oil is subjected to continuous filtration in a continuous conveyor fryer. Fine parts of the product are continually removed using special multi-stage stainless steel filters. The operator visually determines the degree of contamination of the filter and the necessity of cleaning it. The filter is cleaned during the operation of the device, while oil filtration continues with the second double filter.
- The intense oil circulation between the heat exchanger and the product, as well as precise temperature control,
prevent local overheating of the oil, which does not negatively affect the features of the product. - The construction is characterized by high stability, robustness and also durability.
- The external drive is not subject to overheating which could cause deformation and leakage of gear oil.
- Easy-to-remove cover ensures thermal insulation and release of vapor and smoke through the ventilation system and built-in filters.
- A labyrinth seal is used to prevent fuel gas leakage.
- The safety of the operator is ensured by a reliable thermal insulation layer.
- The design dynamically compensates for the thermal expansion of the metal.
Frying mesh
The conveyor nets are made of high-quality stainless steel, they are hygienic and easy to clean. Optionally, it is possible to install special “turbo brushes” for continuous mechanical mesh cleaning during frying. Continuous conveyor fryers Pour Oil are manufactured with the electric, steam or gas heating system.
You might also like
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@foodtechprocess.com
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
Price depends on the chosen option. Please email sales@foodtechprocess.com
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@foodtechprocess.com
We offer different types of continuous fryers, let us know which product you wish to fry and we will help you choose the right fryer for your business.
For more information, contact us at sales@foodtechprocess.com
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@foodtechprocess.com
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
The combination of the compact 400/1100/12 fryer with the secondary upper pressure conveyor, allows you to expand the variety of products that can be fried. It ensures uniform, high-quality frying of fresh and semi-finished products in small to medium scale, making it suitable for small-scale production, professional kitchens and street food businesses. The fryer fully submerges the product in oil throughout the whole frying process with the help of the second pressure conveyor that forces the product beneath the oil's surface.
- The maximum height of the fried product is - up to 50 mm
- Immersion thermometer for visual monitoring of the oil temperature
- Frying time can be set from a few seconds up to an hour!
- High temperature – up to 200C
- The conveyor belt is made out of a food-grade stainless steel thin mesh
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
For additional information, please contact us at sales@foodtechprocess.com
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email at sales@foodtechprocess.com
EcoFry is designed for frying onion rings, seafood, dumplings, spring rolls, pies, vegetables, nuggets and hamburgers with the help of pouring hot oil. A smaller capacity, efficient frying equipment intended for small to medium sized production facilities.
For a quote, please send us an email at sales@foodtechprocess.com
The automatic donut forming and frying machine is a high-quality device that is suitable for high productivity and daily usage.
- Tabletop system
- Includes a depositing attachment
- Compact design
- Completely out of stainless steel
- Material: Stainless steel
- Principle of operation: Continuous mode
- Total power, kW: 3
- Voltage: 220-230V
The price is set for the basic fryer version without additional conveyor modules
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
You can send us a request at sales@foodtechprocess.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
Price depends on the chosen option. Please email sales@foodtechprocess.com
The digitally controlled continuous conveyor system ensures the frying of a wide range of products at a consistent level. Thanks to the possibilities of deep frying, this model is suitable for a wide range of products from spring rolls, onion bhajis and falafel to fish fingers, burgers and chicken nuggets. The fryer is available in widths of 200, 300, 400 and 600 mm.
For additional information, please contact us at sales@foodtechprocess.com
Our continuous fryer is designed for frying cutlets, potatoes, meatballs, croquettes, fish, vegetables and many other products. Working volume up to l: 300 l.
For a price quote, send us an email to sales@foodtechprocess.com
The price is set based on the basic built-in heating option of 24 kW.
The vacuum fryer is designed for frying foods in oil at low temperatures, allowing for the production of healthy snacks such as vegetable and fruit chips. The vacuum feature enables you to reduce the frying temperature of oil down to 110-120 degrees!
- «Cold roast» is a tasty and healthy method of processing the product
- Drying and frying without caramelizing the sugars contained in the product
- Large frying tank - for processing foods with a higher water content
- Modular heating system which allows you to increase the heating power up to 108 kW (optional)
- Circulating heating of oil through a heat exchanger minimizes oil spoilage and prevents localized overheating
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l
- Oil volume: 200l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product” after frying
- Low carbonization of oil due to the cleaning feature after frying
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
The working surface is made out of food-grade stainless steel, on top of which the deep fryer can be installed. It is quipped with wheels for ease of movement.
For additional information, please contact us at sales@foodtechprocess.com