



Thermal insulation for the condensation MAK DRYER 4-14
Thermal insulation of the drying cabinet body to reduce heat loss during product drying. Additional option for the MAK DRYER 7-14.
- Type of the equipment: Optional equipment
You might also like
The price is set for the model with an area of 7 m²
Compact condensate dryer, heat pump powered dehydrator for drying vegetables, fruits, berries, mushrooms, legumes and grains.
- Energy saving, low consumption model (consumption up to 0.9 kW/h)
- Possibility of increasing the drying area in this model up to 14 m² (optional)
- Intensive drying, each section is equipped with a heat pump
- Automatic drying system control
- Delicate drying at low temperatures
- Preservation of most nutrients and the products natural color
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Total power, kW: 0,9
- Voltage: 220-230V
- Area, m²: 7
- Number of shelves: 22
Within seconds, the device measures the refractive index of the sample and converts it to % of solids using the concentration unit.
The refractometer is ready for use after a simple user calibration with deionized or distilled water.
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
- Principle of operation: Continuous mode
- Cooling performance l/h: 100 / 200 l/ 300
A hydraulic crane hoist with a hook is a mechanical device designed to lift and move heavy machinery or engines, commonly used in industrial settings as well as automotive repair for safe and efficient handling of heavy loads.
- Type of the equipment: Optional equipment
The expansion tank is an additional component of the heating system circuit, where flow-through electric heating is used as an independent closed system for heating the hot water, serving as a heat transfer medium circulating in the duplicator of food cooking boilers, reactors, pasteurizers, and other food processing equipment. In heating systems with water heaters operating at temperatures up to 110°C, the expansion tank is necessary to accommodate the increased volume of the heat transfer medium as it expands when heated.
- Special high-pressure vessel – allows to withstand pressure of up to 5 bar in the system.
- Allows the use of a heat generator with superheated water up to 110°C.
- Has different volume options, depending on the volume of the heat transfer medium, selected additionally.
- Type of the equipment: Optional equipment
Rechargeable and portable, ideal for measuring sugar content in fruit juices and beverages, ergonomic design.
This rack is typically used as car mat holders at car washes. It can also serve as a universal stand for use in other enterprises.
- Material: Stainless steel
The AISI 304 stainless steel oil drain system is suitable for use with most deep fryers. It allows you to filter the oil directly when draining it from the fryer.
- Material: Stainless steel
- Weight: 13,5
Designed for a load of up to 200 kg!
The 5 kW induction cooker is the best alternative to traditional electric and gas stoves. It reduces energy costs, improves safety, and minimizes air pollution, making it suitable for both stationary kitchens and mobile catering setups. Its compact design also makes it a practical choice for small kitchens where space and efficiency matter.
- 10-step power (500–5000 W) or 10-step temperature (60–280 °C) control
- Connection - 230 Volt
- Compact dimensions: 410x500x200 mm
- Temperature range from 60 to 280 degrees
- Heating power, kW: 5
- Voltage: 220-230V
The oil-free four-cylinder piston compressor is the ideal solution for those who value both performance and silence.
- Equipped with two twin-piston units with separate engines
- Four air filters
- Mechanical pressure switch
- Quiet operation (at least 25% quieter than traditional compressors)
- Carrying handle and mobile wheel support
- Principle of operation: Continuous mode
- Total power, kW: 1,5
- Voltage: 220-230V
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
- Material: Stainless steel
The sturdy mobile base for large pots, with a diameter ranging from 405 mm to 625 mm, is designed to support and easily transport our 50L, 100L and 150L cooking kettles.
- Made out of stainless steel
- Features casters with brakes on each wheel for secure handling
- Universal model for pots with diameters from 405 to 625 mm
- High load capacity - up to 200 kg
- Material: Stainless steel
- Type of the equipment: Optional equipment
The cyclone dust collection system is ideal for food processing facilities looking to prevent contamination by airborne particles, reduce product loss, and maintain a cleaner work environment.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Voltage: 220-230V
Additional option for the VMG laboratory vacuum homogenizer 20/50.
- Type of the equipment: Optional equipment
Various installation types are possible: in-line, directly into the product tank or via a bypass connector.
- Type of the equipment: Optional equipment
In the production of condensed milk, a refractometer is used to accurately determine the solids content of the product, which is essential for meeting production standards and ensuring compliance with legal regulations.
- Type of the equipment: Optional equipment
Supporting structure on wheels with locks (brakes), 2 swivel wheels, 2 swivel wheels with a brake.
- Type of the equipment: Optional equipment
