Cylindrical conical fermentation tank

The cooking boiler is equipped with a jacket for heating as well as a heating system, an electrically driven stirrer (with a geared motor) and Teflon scrapers, which allow for the processing of products with low to medium viscosity. The cooking device is also equipped with a vacuum system.

ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.

Vacuum evaporator with remote circulation using a heat exchanger is one of the most efficient evaporation methods. This evaporation system is suitable for boiling and concentrating heat-sensitive products such as milk, cream, etc.

• No mixing device required, the product has forced circulation!
• Modular system: possibility to choose the vacuum generator, power and heat exchanger type
• Inclined design and bottom valve for 100% product discharge without losses and blind spots
• Insulated upper hatch of the unit for heat retention and safety
• Tangential product inlet into the vacuum vessel for guaranteed evaporation in a thin layer

The vacuum crystallizer-cooler is specifically designed for sweetened condensed milk. Crystallization with cooling is one of the most important stages in the production of condensed milk according to GOST and is necessary before dosing and packing the finished product.

• After crystallization, condensed milk has a delicate structure with small crystals
• Condensed milk has a homogeneous shape and attractive consumer properties
• The shelf life of condensed milk is extended without changing the quality of the product

The vacuum batch dryer is suitable for gentle and high-quality dehydration to obtain a product with low solvent/moisture content.

• Special stirrer for uniform heat distribution and mixing
• Drying of heat-sensitive wet solids
• Suitable for the separation of suspensions and drying extracts
• Low processing temperature due to a deep vacuum

The price is indicated without gastro containers

Use this all-stainless steel water bath for gradual heating or cooking. The device is equipped with a practical drain tap for easy emptying of the container and is suitable for use with gastronorm containers.

• Compact installation
• Simple controls
• Safe operation
• Wide range of applications

The VMG S 650P vacuum homogenizing unit can be used for making toothpaste as well as a variety of similar products with complex production requirements.

• The vacuum ensures effective air removal, eliminating the conditions for the development of bacteria and other pathogenic organisms.
• The special shape of the mixing device is tailored for the thickest and most viscous products. 
• The Ultra Shear submersible homogenizer creates a stable emulsion.
• The cavitation processes aid in activating hydrodynamic mixing.

It is ideal for cooking jams, marmalades, syrups, sauces, creams and other products.

Price depends on the chosen option. 

The sorption filter 3000l refers to non-pressure equipment of periodic action for filtering liquids using bulk filtering agents and different sorbents.

A vacuum deaerator is extensively used in the food industry to remove gases from products that may retain some bubbles post-processing. Additionally, a flow deaerator is utilized to minimize foaming in products, ensuring a denser structure, especially prior to packaging. Vacuum deaerators play a crucial role in eliminating specific odors from the products, such as in the production of juices, purees, and herbal drinks. This process significantly contributes to enhancing the overall quality and taste of the final product.

• Enhances product quality, structure, and shape
• Prevents oxidation by removing gases
• Preserves organoleptic properties and extends the shelf life
• Suitable for thick and viscous products
• The flow principle allows for the installation of this equipment in existing production lines

This 800-liter capacity dissolver with a circulation pump is designed for preparing liquid solutions by dissolving substances directly in water or other working fluids. It is used in the food and beverage industries for ensuring uniform dissolution through hydrodynamic mixing in a forced recirculation loop.

Recirculation with a food-grade pump ensures rapid and uniform dissolution without sedimentation or the formation of stagnant zones. The working tank is mounted on a mobile platform with wheels, allowing for easy and quick movement between production areas.

• Fast and uniform dissolution without sediment thanks to hydrodynamic mixing
• Forced recirculation loop with product pump/inline homogenizer (optional)
• Mobile stainless steel platform on wheels

A vacuum distillation system is used for controlled separation of liquids based on the evaporation of the liquid and subsequent condensation of its vapors.

The price is indicated for the basic version of the vacuum reactor without additional options, the final cost depends on the modifications

The vacuum homogenizer is an ideal solution for the production of food, for example mayonnaise, it is also suitable for the cosmetics industry - the production of toothpaste. This model of the homogenizer is based on a vacuum reactor with an external homogenizer and an external circulation circuit, the parameters of which are selected as options.

• Tilted design - 25% more efficient mixing
• Easily disassembled reinforced frame mixer, for thick and viscous products
• Jacket for the coolant around the bottom and walls of the working reactor
• The vacuum reactor can withstand a vacuum up to -0.8 Bar
• A large number of options to choose from to suit various requirements

It is possible to order tubs with four perforated walls and bottom, with or without outlet drain or with a tap.

Highly efficient production of a high viscosity pharmaceutical and cosmetic products.

The brewery boiler comprises a two-pot-shaped assembly, in which the integrated frame is a built-in lauter tun, a mash tank, a whirlpool, a laboratory sink and a control panel.