Air Cooling Conveyor with a Multi Air Knife CAC W 500/1700
Air cooling conveyor with MULTI AIR KNIFE is a system for intensive removing excess water or oil and preliminary cooling.Â
The Normit series CAC air-cooling conveyors are designed for intensive cooling and removing (water, oil) of the products after frying, cooking or blanching, using air blown at an ambient temperature.
The Normit CAC ambient air-cooling conveyors effectively reduce the product temperature (in most cases in just a few seconds), immediately stopping their cooking. The product is cooled to a temperature suitable for packaging.
The design of the cooling conveyors ensures optimal air distribution across the whole area of the conveyor mesh. A high performance industrial fan with power controls is set at the bottom of the conveyor and is included in the basic scoop of supply.
Dwell time is regulated via a frequency inventor. The design of the air conveyor´s coolers is convenient for maintenance and inspection. High efficiency minimizes its energy footprint and it is easy to integrate into any production line.
CAC ambient air-cooling conveyors are made completely of food grade stainless steel AISI304 / AISI316L or with PVC belt.
The width of the cooling conveyor is determined by the width of the heat treatment equipment. The height of product loading and unloading is determined by the customer.
For pre-cooling and removal of excess oil, water, and particulates of starch, it is recommended to supplement the air cooler with use of the Air Knife section.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
You might also like
The inspection conveyor is designed for inspection and manual removal of unsuitable pieces of root vegetables, fruits and berries.Â
- Material: Stainless steel
- Engine power, kW: 0,25
- Principle of operation: Continuous mode
CAC Air cooling conveyors are designed for intensive cooling and removal of excess water or oil (air knife section) from products after frying, cooking or blanching.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 500 mm
- Voltage: 380-400V
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
Feeding conveyors optimally transport your product to another processing facility to maximize output and improve downstream performance. Price depends on the product as well as size of the conveyor.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
Washing tank with wheels with conveyor belt for fruits and vegetables.
- Material: Stainless steel
- Engine power, kW: 2,4/
- Principle of operation: Continuous mode
- Country of origin: EU
- Working Area Width: 330 mm
- Voltage: 380-400V
The vacuum bread cooler is well-suited for application in small bakeries or as a laboratory unit in industrial enterprises. This enables the post-baking of bread under vacuum conditions, influencing both its shape and structure.
- Built-in deep vacuum system
- Built-in vapor removal and condensation system
- Built-in refrigeration system
- The chamber is designed for 3 gastro containers size GN 1/1, or pallets: 400x600/530x325 mm
- Compact and mobile installation
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 130l
- Voltage: 380-400V
An air cooling conveyor is a system that uses moving belts and airflow to cool down products as they are transported along the conveyor line.
For additional information or a price quote, send us a request.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Working Area Width: 500 mm
Fixed cooling unit wit different capacities from 67 kW up to 226 kW. Unit are solid and ensure long-life base operation.
- Country of origin: EU
This air cooler and heater is multifunctional. It can be used as air cooler, heater. The compact and lightweight air cooler / heater contains. 4 caster wheels make it easy to move the unit.
Vacuum homogenizer VMG M is the ideal solution for the production of pilot batches and the industrial production of a wide range of products of small and medium production. The price depends on the production capacity.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l
- Max vacuum: -0,8 Bar
- Working volume: 50-80l
The water chiller CHWHE consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. We offer different capacities.
- Volume: 120 l/ 300l
- Voltage: 380-400V
The Milk Cooler has a simple design, which allows for easy and safe operation. it meets the requirements of all dairy production facilities.
- Material: Stainless steel
- Principle of operation: Batch mode
- Volume: 50l/ 100l/ 200l/ 300l
- Voltage: 380-400V
The vacuum diffusion cooling unit is a multifunctional device not only for vegan processors.
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
The industrial multi-layer belt oven with integrated cooling conveyors is designed for continuous roasting and thermal processing of food products with subsequent controlled cooling before discharge. The system combines intensive hot-air roasting with a vertically stacked multi-level conveyor structure and integrated cooling zones in the lower section, ensuring uniform heat treatment of the product, energy efficient processing and continuous industrial-scale throughput.
- 5-level conveyor design with 3 heating sections and 2 cooling sections
- Adjustable conveyor speed via a frequency converter with IP66 protection
- Uniform roasting through controlled product movement and immediate gradual cooling
- Separate PID temperature control for each heating section
- Hygienic stainless steel construction for professional industrial food production
- Heating: Electric
- Material: Stainless steel
- Heating power, kW: 60
- Principle of operation: Continuous mode
- Country of origin: Slovakia
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
- Principle of operation: Continuous mode
- Cooling performance l/h: 100 / 200 l/ 300
The vacuum crystallizer-cooler is specifically designed for sweetened condensed milk. Crystallization with cooling is one of the most important stages in the production of condensed milk according to GOST and is necessary before dosing and packing the finished product.
- After crystallization, condensed milk has a delicate structure with small crystals
- Condensed milk has a homogeneous shape and attractive consumer properties
- The shelf life of condensed milk is extended without changing the quality of the product
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 100l/ 300l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
It is intended for pre-cooling after cooking or frying vegetables and fruit, meat, fish and seafood and other products.
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 600 mm
The rotary drum cooler is designed for efficient pre-cooling, stopping the cooking process, and cooling of boiled, blanched, fried, baked, or thermally processed foods. The rotating perforated drum ensures uniform cooling together with the additional water supply.
- Uniform cooling
- Adjustable drum speed
- Made entirely out of stainless steel
- Suitable for a wide range of food products
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Total power, kW: 1,1
Heating: electric and steam - combination
- Material: Stainless steel
- Principle of operation: Continuous mode
ACM mixing tank is intended for efficient cooling, heating, tempering and storing of mayonnaise, sour cream, chocolate, oil and similar products after their production.
- Material: Stainless steel
- Principle of operation: Batch mode
The new line of NDJ refrigeration units is suitable as a cooling source for industrial applications operating with a closed coolant circuit. Efficient and reliable flow cooling of liquids
- Principle of operation: Continuous mode
- Country of origin: EU