Planetary mixer SP Profi 300

A detachable lid with an automatic food stirrer for stainless steel 40 cm pots, suitable for volumes of 50 and 100 liters. An automatic stirrer allows you to mix and stir various products, including during thermal processing. The type of mixing device can be additionally selected depending on the required process.

• Professional industrial single-phase motor for 220-230 Volts
• The control is located directly on the motor housing or on the drive cable
• Easy and simple installation and fixation of the lid on the pan
• Suitable for standard 40 cm pots with a capacity of 50 or 100 liters
• The lid and stirrer are made entirely out of stainless steel

The tank is designed for heating and mixing chocolate, butter, margarine, honey and similar products.

The Z-Sigma Arm paddle mixer is designed for intensive mixing, stirring, kneading and plasticizing products with high and very high viscosity, such as chewing gum base, stiff dough with low water content, toffee mass, soap base, adhesives.

• Double Z-shaped blade
• Very high shear force
• Minimum gap between z blades and the working container
• Independent electric drive for each blade
• Electric tilting for automatic unloading up to 180 degrees
• The mixer is made entirely out of food grade stainless steel AISI304
• Possibility to choose the side of tilting and unloading

A honey homogenizer is a batch-type device designed to improve the product's structure and organoleptic properties. It ensures a uniform consistency and stable texture of honey.

Homogenization is a processing technology that makes honey flowable and uniform, as well as inhibits crystal growth, thus meeting the needs of producers and consumers. The design, size, and angle of the rotary auger achieve a high level of homogenization, which also reduces raw material processing time.

• High level of homogenization, aimed at increasing stability and improving the honey's structure without altering the product's flavor.
• No dead spots or corners due to the inclined bottom of both the working tank and the auger mixer.
• The working tank is equipped with a jacket and a built-in water heating system.
• Large-diameter outlet valve installed at the lowest hydraulic point.

The new design of the universal cutter with gravity mixing is used for the production of thick and pasty products. The cutter is designed to carry out production processes such as cutting, mixing, crushing and emulsifying of various types of products to a liquid state. Thanks to the built-in duplicator, it can also be used as a device for the production of cream honey or cream honey soufflé.

• Cutting knives with a powerful 11 kW electric drive
• Frame mixing device with fluoroplastic scrapers
• Hatch opening sensor for safe maintenance
• Plexiglass hatch for visual inspection
• Duplicator for the thermal liquid around the bottom as well as the walls of the installation
• Inclined design for efficient grinding, homogenization and discharge of thick and viscous products

The periodic drum coating/seasoning machine is designed to saturate and infuse a diverse range of products with flavorful aromas, vitamins, and various taste additives. It is utilized in the production of snacks, chips, cereals, and nuts, offering a wide array of flavor enhancements.

• Mechanical system for tilting the working bowl with fixation points in intermediate positions
• Special perforated blades for gentle product turning
• Powerful drum rotation drive
• Entirely made out of food grade stainless steel AISI304
• Easy control via an inverter (optional): speed control and reverse

Grinding mill for continuous grinding of meat and ingredients such as seeds, small bones and cartilages that are unwanted in the final product.

The Y-shaped food mixer contains a double vessel with a 90° apex angle. This mixing system is designed for mixing, pre-mixing liquid, viscous, dry and bulk components to obtain homogeneous mixtures.

• Special shape designed for fragile products that may break when exposed to centrifugal force
• Effective mixing of products with different components to obtain a homogeneous structure quickly and with minimal energy consumption
• Gentle mixing and tumbling due to complex random trajectories of product movement
• Compact installation
• Easy maintenance and high level of safety - safety bar with a position sensor

This is a 400 l capacity heating boiler, we offer different capacity commercial cooking boilers.

Suitable for mixing a small amount of dough or meat as well as other thick media.

We offer different types of dryers for different products.

The stirrer for mixing and stirring different types of honey comes with a stainless steel container of 50 and 100 liters. It can also be used for mixing honey during blooming, pasteurization, and controlled crystallization (creaming).

• Powerful electric drive and reinforced stirrer for thick products
• Temperature control to ensure that honey does not overheat above 40 degrees during processing
• The mixing device is also equipped with fluoroplastic scrapers
• All materials in contact with the product are made out of stainless steel

The appropriate mixing equipment for drum processing depends upon the properties of the products and with the available drum opening.

Barrel mixers are used to mix a wide range of loose and granular products in a shipping/barrel container. The available mixer models are suitable for the following volumes:

ConMix 20 - 20-30 liter standard drums with a diameter of 316 mm, adjustable frame structure height

ConMix 75 - 48-65 liter standard barrels with a diameter of 400 mm, adjustable frame structure height

• It is possible to use standard food containers ranging from 20-65 liters
• Easy control via a frequency converter as a stand-alone control panel
• Safe operation thanks to a roll bar with a position sensor

The NORMIT drum mixers are designed for thorough mixing for products such as combined feed for animals, infant formulas, baby food, food concentrates and additives, sports supplements and nutrients, coffee, tea, pharmaceuticals and chemical products.

The vacuum homogenizer with an inclined design is designed for processing and manufacturing a wide range of liquid, pasty and viscous products with different requirements for their production conditions and other products including those with a high viscosity.